BMW Engine Parts for BMW F87 M2 N55 3.0L

Enthusiast Bundle: Turner Motorsport Crank Seal Guard with ECS Kevlar-Reinforced Belt

Protect your N5X/S55 from catastrophic failure with this must-have upgrade!

The Turner Motorsport Crank Seal Guard is meticulously designed to safeguard your engine’s crank seal from potential damage caused by a shredded serpentine belt. Oil or coolant leaks can lead to accessory belt slippage, fraying, and tearing, which can send belt debris behind the harmonic balancer and into the crank seal, risking serious engine damage.

Key Benefits:

Shields crank seal from accessory belt debris, preventing engine failure Custom-fit for N54/N55/S55 engines Zinc-coated fasteners for superior corrosion resistance Durable 6061 billet aluminum construction, with Turner blue anodized finish for added strength and style Cutting-Edge Design:

Designed using FARO laser scanning and Solidworks CAD for precision fitment Rigorous testing ensures reliable protection in all conditions Easily installs with 2 securing bolts torqued to 20Nm ECS Performance Kevlar-Reinforced Accessory Belt:

Reduced elongation for consistent performance over time Enhanced shock and impact resistance Superior oil and temperature resistance tested to JASO E 109-94 and SAE J2432 standards Ensure long-term engine health and peace of mind with the Turner Motorsport Crank Seal Guard and ECS Kevlar-Reinforced Accessory Belt combo. Prevent the "when, not if" risk of belt-related engine failure today!

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

This eccentric shaft is a vital component of your BMW's N55 Valvetronic system, responsible for precise control of valve lift. In the N55 engine, the Valvetronic system uses intermediate levers between the camshaft and lifters to adjust valve lift dynamically. These levers are actuated by this eccentric shaft, which is rotated by an electronically controlled motor under the direction of the engine computer.

Eccentric shaft failure is a common issue in N55 engines, often caused by inadequate lubrication due to extended oil change intervals. The most frequent failure occurs when the eccentric shaft gear wears down, leading to disengagement from the motor's worm drive. Symptoms include multiple fault codes, such as P1014 (Shaft Parity Error), P1017 (Shaft Sensor Plausibility), P1023 (Valvetronic Adjustment Range), and P10E1 (Valvetronic System No Travel Detected).

If your BMW is experiencing Valvetronic-related fault codes, a failing eccentric shaft could be the source of the problem. Opt for this premium direct replacement from Bremmen Parts to restore your Valvetronic system's functionality and ensure a durable, high-quality repair.

Enhance the aesthetics and performance of your F30 BMW equipped with the N55 engine with the Turner N55 Gloss Carbon Fiber Engine Cover. CAD-designed in-house, this engine cover is tailored specifically for F30 335i models. Crafted from hand-laid 2x2 weave carbon fiber, it's available in both gloss and matte finishes. The meticulous design pays homage to previous BMW forced induction powerplants, exposing more of the engine on the cold side. The incorporation of an OEM BMW roundel ensures OE fit and finish.

Pairing a Turner engine cover with a Turner carbon fiber intake is recommended by ECS Tuning for maintaining an impressive appearance and enhancing the sound of your N55 engine bay.

• CAD-designed for F30 BMWs with N55 engine
• Hand-laid 2x2 weave carbon fiber
• Available in gloss and matte finishes
• Homage to previous BMW forced induction powerplants
• OEM BMW roundel for OE fit and finish

Set of 6 Blue Performance Ignition Coils

Turner BMW ignition coils are engineered for performance and efficiency, addressing the key components of engine function - air, fuel, and spark. These modified ignition coils increase energy output, resulting in a faster, more efficient, and consistent burn for optimal fuel utilization. The Turner ignition coils feature a distinctive blue housing, adding both performance and aesthetic value to your engine.

Routine maintenance is crucial, and these ignition coils should be changed every 40,000 - 60,000 miles to ensure the health, performance, and efficiency of your engine. Choose Turner Ignition Coils to keep your engine running strong and healthy.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

The impulse sending wheel, located on both the intake and exhaust camshaft adjustment units, provides critical timing data to the camshaft position sensor, keeping your VANOS system synchronized. A worn or malfunctioning impulse sender can cause a myriad of performance issues, including hard starts and rough idle.

Whether you are performing a proactive timing system overhaul or addressing a component failure, Bremmen Parts offers a high-quality replacement designed for a precise fit and long-term durability.

F87 M2 N55 Race-Inspired Catback Exhaust System

Ready to transform your N55-powered M2 into a track-inspired machine? The Turner Motorsport Catback Exhaust delivers a lightweight, high-flow design that enhances both power and exhaust tone. Unleash a bold, aggressive sound that matches the intensity of your M2, revealing the full sonic and performance potential of the twin-scroll turbo N55 engine.

BMW enthusiasts know the thrill of owning an M2 with the N55, but the stock exhaust system can mute its character, especially as it warms up. The Turner Catback exhaust brings this engine to life with unrestricted flow and minimized weight, making every throttle response feel sharper, and every acceleration, thrilling. Perfect for the driver who wants the raw, unfiltered power of the N55 without the cost premium of the M2 Competition model.

Engineered for Power and Flow

Turner’s engineers crafted this catback exhaust to minimize weight and maximize airflow, using a true 3.0-inch stainless steel front section and straight-through rear piping. By removing factory restrictions, they’ve created an exhaust system that significantly improves performance, reduces back pressure, and delivers a sport-tuned sound that’s equally exhilarating on the track and the road. Weighing just 28 lbs, it offers a significant 27 lb reduction over the OEM exhaust, amplifying your M2's agility and responsiveness.

Sound Optimization: The N55 comes alive with this race-inspired exhaust, delivering a fierce tone that announces your arrival. Explore sound clips on the ECS Tuning YouTube Channel. High-Quality Materials: Constructed from T304 stainless steel, this exhaust is TIG-welded for enhanced durability, while the slip joints and precision mandrel bends ensure an exact fitment. Performance-Built: The quad 4.0-inch brushed exhaust tips complete the aggressive look while helping to enhance airflow, resulting in improved horsepower and torque. Features and Benefits

Motorsports-inspired exhaust tone 27 lb weight reduction for enhanced performance Free-flow design reduces back pressure for optimal torque and power gains Quad exit tips with a striking brushed finish Straightforward bolt-on installation with OEM mounting points Kit Includes

3.0" front section, direct fit to factory downpipe Lightweight midsection for better flow and sound "Race Inspired" rear exhaust section Quad 4.0" brushed exhaust tips Necessary clamps and hardware for seamless installation Optional Exhaust Pipe Hanger Removal Pliers Turner Motorsport Performance Ignition Coils

For top-tier spark and efficiency, the Turner Performance Ignition Coils deliver! Boosting energy output, these ignition coils provide a consistent, efficient spark, maximizing fuel burn and optimizing performance. Engineered with Turner’s signature blue housing, they look as good as they perform.

Features and Benefits

Enhanced ignition performance Perfect fitment for N55 engines Signature Turner Blue finish for a distinctive engine bay upgrade