BMW Engine Parts for BMW F87 M2 N55 3.0L

Boost your engine's capabilities with the Dinan N-Series Performance Ignition Coils - a vivid set of six in striking red. Precision-engineered to amplify ignition power, these coils guarantee heightened throttle response, seamless idling, and a notable surge in overall power. Meticulously crafted for durability, they seamlessly integrate into your vehicle, enhancing both performance and aesthetic appeal under the hood.

For BMW M54 applications, coil styles vary between M or N depending on the vehicle's production date. Models produced up to September 2002 require the M series style coil, while those manufactured after September 2002 use N series style coils. It's crucial to visually compare and verify the correct coil needed for your vehicle before making a purchase.

Benefits:

• Specific coil styles for different BMW M54 application dates
• Helps ensure the right replacement part for your vehicle's coil
• Visual verification recommended prior to purchase for compatibility

BMW N52 3.0L, N55 3.0L Timing Chain Tensioner With Guard Rail

Ensure proper engine performance and prevent catastrophic damage with the BMW N52 3.0L, N55 3.0L Timing Chain Tensioner With Guard Rail. This essential component maintains tension on the timing chain, preventing slack that can lead to skipped teeth and engine failure.

Benefits:

• Maintains proper tension on the timing chain
• Prevents skipped teeth and potential engine damage
• Includes guard rail for added protection
• Quiets noisy timing chains

Keep your BMW engine running smoothly and reliably with the BMW N52 3.0L, N55 3.0L Timing Chain Tensioner With Guard Rail.

This eccentric shaft is a vital component of your BMW's N55 Valvetronic system, responsible for precise control of valve lift. In the N55 engine, the Valvetronic system uses intermediate levers between the camshaft and lifters to adjust valve lift dynamically. These levers are actuated by this eccentric shaft, which is rotated by an electronically controlled motor under the direction of the engine computer.

Eccentric shaft failure is a common issue in N55 engines, often caused by inadequate lubrication due to extended oil change intervals. The most frequent failure occurs when the eccentric shaft gear wears down, leading to disengagement from the motor's worm drive. Symptoms include multiple fault codes, such as P1014 (Shaft Parity Error), P1017 (Shaft Sensor Plausibility), P1023 (Valvetronic Adjustment Range), and P10E1 (Valvetronic System No Travel Detected).

If your BMW is experiencing Valvetronic-related fault codes, a failing eccentric shaft could be the source of the problem. Opt for this premium direct replacement from Bremmen Parts to restore your Valvetronic system's functionality and ensure a durable, high-quality repair.

We are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.

Our kit is entirely plug-and-play with the factory vehicle harness. No cutting or splicing of OEM wiring/connectors. It installs in minutes and can be removed without a trace on the car!

Our team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is unobstructed and with no added pressure drop at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!

Flex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.

Flex Fuel Sensor Adapter also contains two 1/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor for vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.

Install the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol/petrol blend % in your fuel tank. It does not get better or easier than this!

bootmod3 FlexFuel Plug and Play Kit:

• Minutes to install at home as opposed to hours at a shop with car up on lift fabricating/cutting into factory fuel lines and splicing/cutting/pinning into OEM electrical
• 4+ hours in time/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! 
• Fully reversible/removable and back to stock without a trace in minutes
• Custom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat
• All connecting points sealed with fuel safe Viton o-rings
• Flex Fuel Sensor Adapter housing provides additional 1/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support
• CANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice
• Power/CANBus 4-wire plug and play harness
  • 100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles
  • 100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC/FEM) connector on Gen1 F-series B48/B58
• Continental Flex Fuel sensor 3-wire harness
• Custom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board
• Custom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5/16” or 3/8” fuel feed line. No cutting or new lines required.
• -6 AN fitting by Racetronix

OEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.

The Gen V WG38 Ultra-Gate 38 external wastegate is your cost-effective, high-performance solution. This 38mm external wastegate is meticulously designed for hassle-free bolt-on applications that make use of the 2-bolt flange.

Elevate Turbocharger Performance with Upgraded Kit

Upgrade your turbocharger's performance with this kit, presenting an impressive 30% increase in the compressor wheel size within the stock turbocharger housing. Experience a significant power boost by elevating pressure at high RPMs while maintaining efficient operation. The enhanced thrust system ensures prolonged turbocharger life, and for optimized performance, consider pairing it with Stage 4 Dinan software to manage the additional boost.

Key Features:

• Increases compressor size by 30%
• Boosts power through increased boost pressure
• Upgraded thrust system for turbocharger longevity
• DINANTRONICS Stage 4 software recommended for optimal engine performance
• Earns 2 points towards your Dinan badge

With over 35 years of expertise, Dinan leads BMW tuning advancements, prioritizing balanced enhancements that preserve the original driving feel. Backed by a four-year, 50,000-mile warranty, Dinan parts undergo rigorous testing, ensuring reliability. Upon significant part installation, enthusiasts receive an exclusive trunk badge, signifying the transition to Dinan performance.

The impulse sending wheel, located on both the intake and exhaust camshaft adjustment units, provides critical timing data to the camshaft position sensor, keeping your VANOS system synchronized. A worn or malfunctioning impulse sender can cause a myriad of performance issues, including hard starts and rough idle.

Whether you are performing a proactive timing system overhaul or addressing a component failure, Bremmen Parts offers a high-quality replacement designed for a precise fit and long-term durability.

Bremmen Parts Engine Mount Nut - M10x1.25

Bremmen Parts presents the high-quality Bremmen Parts Engine Mount Nut - M10x1.25, designed to meet the exacting standards of BMW and MINI enthusiasts. Crafted with precision and durability in mind, this engine mount nut ensures optimal performance and reliability for your vehicle. Whether you're conducting routine maintenance or performing an engine upgrade, trust Bremmen Parts to deliver exceptional quality and peace of mind.

Key Benefits:

• Precision Craftsmanship: Engineered to exact specifications for a perfect fit and function.
• Durable Construction: Made from high-quality materials to withstand the rigors of engine operation.
• Enhanced Performance: Helps maintain engine stability and reduce vibrations for a smoother driving experience.
• Easy Installation: Designed for straightforward installation, saving you time and hassle.
• Compatibility: Compatible with a wide range of BMW and MINI models for versatile use.

Upgrade your BMW or MINI with the Bremmen Parts Engine Mount Nut - M10x1.25 for superior performance and reliability.

Decoupling Element - Each is a crucial component for BMW vehicles, specifically designed to ensure optimal injector installation. This high-quality metal ring is positioned at the end of the fuel injector, playing a vital role in maintaining proper alignment and function.

Features and Benefits:

• Essential Component: Integral for correct injector installation and operation.
• High-Quality Construction: Made from durable metal to withstand the rigors of engine performance.
• Precision Fitment: Ensures proper alignment of the fuel injector, enhancing engine efficiency.
• Easy Installation: Designed for straightforward installation without the need for modifications.
• Compatibility: Suitable for a range of BMW models, ensuring versatile use.