CNC Billet License Plate Bracket

T#:27105150

Part#: RE.061

Ships in 3 Business Days

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.

Show More Show Less

AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...

T#:340098

Part#: AEROCATCH

In Stock

$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD

Add to Wish List

Starting at $ 82.99 USD

Add to Wish List

As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles with Adaptive Cruise Control and M Sport Package

T#:599470

Part#: LPM-BMC0136-N

Ships in 2 Business Days

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

Autoteknic Universal Carbon Fiber Splitter

T#:396026

Part#: UN-0001-CF

In Stock

$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 131.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 131.99 USD

Limited Qty Sale

Add to Wish List

AutoTecknic Universal Carbon Fiber Splitter

The AutoTecknic universal carbon fiber splitter offers an upgraded front-end aesthetic for your vehicle. Crafted with 3K plain weave carbon fiber and a UV clear coat, these splitters boast a lustrous mirror shine finish. Compatible with various bumpers upon proper installation, they deliver:

Made from 3K plain weave carbon fiber with a UV clear coat finish
Compatibility with various bumpers with appropriate installation
Pre-installation drilling for mounting holes required
Vehicle-specific installation hardware not included
Provides a sporty appearance without excessive aggressiveness
Shields the bumper against speed bumps and road dips
Enhances the overall vehicle appearance while ensuring protection

Designed for those seeking a subtle yet sporty visual enhancement, these splitters safeguard your bumper while boosting your car's aesthetics. Recommended by numerous customers for both its visual appeal and functional benefits.

Package Contents: One set of AutoTecknic universal carbon fiber splitters.

Splitter Dimensions: 21" (Length) x 10" (Depth) x 5" (Width)

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - BMW 8-S...

For vehicles without Adaptive Cruise Control

T#:640783

Part#: LPM-BMC0166-N

Ships in 2 Business Days

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

Akrapovic Carbon Fiber Mirror Cap Set - High Gloss - F90 M5

T#:558679

Part#: WM-BM/CA/3/G

In Stock at Vendor

$ 1,225.99 USD

Add to Wish List

Qty

$ 1,225.99 USD

Add to Wish List

Carbon fiber mirror caps are an easy and effective exterior accessory. These are made by Akrapovic and are the perfect match to their other carbon trim - muffler tips and rear bumper diffuser. Simply unsnap the original mirror cap and install the new carbon type.

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - BMW 8-S...

For vehicles with Adaptive Cruise Control

T#:640784

Part#: LPM-BMC0167-N

Ships in 1 Business Day

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

Akrapovic Carbon Fiber Mirror Cap Set - Matte - F90 M5

T#:558678

Part#: WM-BM/CA/3/M

Back Ordered

$ 1,092.99 USD

Add to Wish List

Qty

$ 1,092.99 USD

Add to Wish List

Carbon fiber mirror caps are an easy and effective exterior accessory. These are made by Akrapovic and are the perfect match to their other carbon trim - muffler tips and rear bumper diffuser. Simply unsnap the original mirror cap and install the new carbon type.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Exterior Trim, Body Parts, Aero and Styling for BMW F92 M8 S63 4.4L

Sub-Categories

CNC Billet License Plate Bracket

AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

Autoteknic Universal Carbon Fiber Splitter

AutoTecknic Universal Carbon Fiber Splitter

Carbonio No-Drill Front License Plate Mount - North America - BMW 8-S...

Akrapovic Carbon Fiber Mirror Cap Set - High Gloss - F90 M5

Carbonio No-Drill Front License Plate Mount - North America - BMW 8-S...

Akrapovic Carbon Fiber Mirror Cap Set - Matte - F90 M5

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results