Cylinder Head Gaskets for BMW X5 M S63 4.4L

Clear BMW chassis

Please ensure your correct model is selected

The cylinder head gasket is one of the most vital in the entire engine. If this gasket fails in even the most minute way, it can and will cause a host of other issues. Choose a high quality replacement from Turner Motorsport and get back on the road again.

Sub-Categories

Sort By:
OEM Elring Valve Cover Gasket Set - Cylinders 5-8 - BMW N63/S63 4.4L
OEM Elring Valve Cover Gasket Set - Cylinders 5-8 - BMW N63/S63 4.4L ...
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:2691317
Part#: 11127614701
Ships in 1-2 days
$ 48.99

This product was last offered at the strikethrough price on
04-06-2026

$ 34.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 34.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Everywhere there is a seam on your engine, there is the potential for an oil leak. This is prevented through the use of gaskets and seals. One such gasket that prevents oil leaks is the valve cover gasket. This gasket is used to seal the gap between the valve cover and the cylinder head, however, since this gasket is made of rubber it has a tendency to become brittle, crack, and start to leak due to its constant exposure to heat and engine oil.
Show More Show Less
OEM Elring Valve Cover Gasket Set - Cylinders 1-4 - BMW N63/S63 4.4L
OEM Elring Valve Cover Gasket Set - Cylinders 1-4 - BMW N63/S63 4.4L ...
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:2691316
Part#: 11127614700
In Stock
$ 48.99

This product was last offered at the strikethrough price on
09-03-2026

$ 36.49 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 36.49 USD
Free Shipping on orders $49 and up
Add to Wish List
Everywhere there is a seam on your engine, there is the potential for an oil leak. This is prevented through the use of gaskets and seals. One such gasket that prevents oil leaks is the valve cover gasket. This gasket is used to seal the gap between the valve cover and the cylinder head, however, since this gasket is made of rubber it has a tendency to become brittle, crack, and start to leak due to its constant exposure to heat and engine oil.
Show More Show Less
Elring Cylinder Head Gasket - E70, E71, F01, F02, F06, F07, F10, F12, F13
Elring Cylinder Head Gasket - E70, E71, F01, F02, F06, F07, F10, F12,...
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:596412
Part#: 11127567765
In Stock
$ 137.10

This product was last offered at the strikethrough price on
08-26-2026

$ 112.99 USD
Free Shipping
Add to Wish List
$ 112.99 USD
Free Shipping
Add to Wish List
Just a head gasket, not a set
Elring Valve Seal Repair Kit
Elring Valve Seal Repair Kit
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:591665
Part#: 11340054492
In Stock
$ 53.99

This product was last offered at the strikethrough price on
08-14-2026

$ 45.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 45.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Athena Cut Ring Head Gasket S63/N63
Athena Cut Ring Head Gasket S63/N63
5150 Autosport - Corporate Logo
T#:26238393
Part#: ATH-HG-CR-S63-90
Ships in 3 Business Days
$ 445.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 445.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Athena-SCE's gasket body is composed of Motorgasket, a reinforced material developed by Athena's R&D department. This consists of a steel core covered with two layers of asbestos-free aramid fibre and offers excellent thermal and mechanical resistance without compromising its ability to adapt to mating surfaces. To ensure maximum sealing under all conditions, a silicone bead is also applied to critical sealing areas, such as oil and coolant passages. The AISI 304 stainless steel cooper rings bite into the aluminum head, providing maximum sealing around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2 bar boost. Please be aware that the gasket should be 0.5mm to 1mm larger than the piston. For example, if the piston measures 84mm, then the gasket should be the next size up, either 84.5mm or 85mm. Before installation, it is crucial to have the mating surfaces of the cylinder head and block professionally cleaned and resurfaced to ensure they are completely flat. Sold as a set - Includes Bank 1 and Bank 2 Gaskets Make sure that the engine block and cylinder head surfaces are clean, flat, and free from any debris, oil, or coolant. Install the Cut Ring gasket on the engine block and ensure that it is properly aligned. Avoid twisting or bending the gasket during installation. Place the cylinder head on top of the gasket and install the head bolts or studs in their correct positions. Follow the manufacturer's recommended torque specifications and tighten the bolts or studs in the proper sequence to ensure even clamping force across the gasket. After the initial tightening, re-torque the head bolts or studs after the engine has been started and then allowed to cool to room temperature. This will ensure that the gasket is properly seated and compressed. It is recommended to not use any additional sealant on the MLX gasket, as it is already coated with a Viton rubber sealant. Using additional sealant can hinder the performance of the gasket.
Show More Show Less
BMW Valve Cover Gasket
BMW Valve Cover Gasket
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:15412491
Part#: 11128636546
Ships in 1 Business Day
$ 54.99

This product was last offered at the strikethrough price on
04-26-2026

$ 43.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 43.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.
Show More Show Less
Elring High Pressure Fuel Pump Gasket
Elring High Pressure Fuel Pump Gasket
Used for the valvetronic solenoids and the high pressure fuel pump
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:579938
Part#: 593.22
In Stock
$ 11.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 11.99 USD
Free Shipping on orders $49 and up
Add to Wish List
A quality replacement from a trusted German manufacturer.
BMW Valve Cover Gasket
BMW Valve Cover Gasket
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:15412490
Part#: 11128636547
Ships in 2 Business Days
$ 56.99

This product was last offered at the strikethrough price on
05-07-2026

$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.
Show More Show Less
Elring Cylinder Head Gasket Set - E70, E71
Elring Cylinder Head Gasket Set - E70, E71
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:591526
Part#: 11122159374
Ships in 1-2 days
$ 266.38

This product was last offered at the strikethrough price on
08-13-2026

$ 259.91 USD
Free Shipping
Add to Wish List
$ 259.91 USD
Free Shipping
Add to Wish List
Does not include the head gasket

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Shipping