BMW Engine Parts for BMW X5 M S63 4.4L

Fuel injector and fuel supply rail caps

T#:5135630

Part#: AGA-CI-Y12

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Don't let dirt be the reason for bad fuel injectors.

Weistec BMW BMW S63 Billet Oil Filter Cap - Black

T#:22690726

Part#: 01-563-01794-6

Ships in 3 Business Days

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

Direct replacement/bolt in for the S63 and S63TU engines. CNC machined 6061 aluminum Anodized in Black

BMW Injector Sockets - 17mm & 14mm

T#:385905

Part#: SLY13400

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Correct sockets designed to protect injectors that are easily damaged

Weistec BMW BMW S63 Billet Oil Filter Cap - Red

T#:22690727

Part#: 01-563-02059-1

Ships in 1 Business Day

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

Direct replacement/bolt in for the S63 and S63TU engines. CNC machined 6061 aluminum Anodized in Red

OMP Battery Cut Off Switch / Kill Switch

T#:1614

Part#: EA-462

Back Ordered

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.

Show More Show Less

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 Pre-LCI ...

For Pre-LCI models only

T#:32118904

Part#: EVE-X56M-CHG

Ships in 2 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Presenting the perfect addition to our X5M, XM intake system to optimize the flow path all the way to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter all the way to the turbos. The stock inlets narrow down immediately after the connection to the intake which creates a restriction especially at higher boost levels. We have alleviated this restriction and also designed the curvature to be as smooth as possible allowing the turbos to function with reduced resistance. Made from prepreg carbon fiber with CNC machined flanges, the inlets also provide an aesthetic improvement to the engine bay. Benefits of the inlets are apparent with tuned vehicles where the boost pressure is higher and therefore the flow demand form the turbos is greater. This is where the larger volume of the carbon inlets help provide that extra flow. The performance gains are produced from providing the turbos with a less resistive flow path which allows them to reach peak boost sooner in the RPM range. When comparing to the stock inlets the differences are clear to see. Where the stock tubes narrow down immediately after the connection to the intakes, our tubes maintain a larger diameter and the reduction to the stock turbos is achieved with an internal radius on the machined flanges. This allows for larger volume whilst maintaining a smooth flow path. One of the drawbacks of the oversized inlets was the more aggressive reduction in size to match the stock turbos which created some flow constraints. NOTE: Some photos show our optional F9X X5M / X6M / G09 XM / G0X M60i Intake system available separately. Each inlet inlet set consists of: Prepreg Carbon Inlet Pair CNC Machined Turbo Flanges CNC Machined Breather Valve Assembly Compatible Models: F95 X5M Pre-LCI F96 X6M Pre-LCI G09 XM Pre-LCI G05 X5 M60i Pre-LCI G06 X6 M60i Pre-LCI G07 X7 M60i Pre-LCI ** This item is not eligible for return **

Show More Show Less

BMW E60 M5 Crank Case Test Cap

T#:6924319

Part#: AGA-6061-TC

Ships in 7 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.

Show More Show Less

Radium Engineering Universal Catch Can Petcock Drain Kit

T#:27905095

Part#: 20-0024

In Stock at Vendor

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Includes:

Anodized 4AN ORB Barbed Adapter Fitting, Black Ball Valve with 1/4" Barbs, 125psi @ 140F 4 feet of Radium 1/4" PCV Hose

Multi-Pump Fuel Surge Tank (MPFST)

T#:31059457

Part#: 20-1440

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

AGA Tools N63 Updated Rear Engine Cover - BMW N63 (2008-2019) ...

T#:26404835

Part#: AGA-N63-6061-URC

Ships in 7 Business Days

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

The BMW N63 rear cover is a metal plate that covers the rear of the BMW N63 V8 engine. It helps to seal the engine and prevent oil leaks. Over time, the original sealing gasket becomes brittle and does not seal, causing leaks between the engine and transmission bell housing. This repair can be very expensive and is usually misdiagnosed for a rear main seal. The AGA Updated N63 Rear Cover is an inexpensive alternative, made of 6061 billet aluminum. This kit includes the rear cover, viton o-ring, alcohol wipe, scotch-brite pad and o-ring grease. BMW Part # 11142446298 & 11148483799 BMW Service Bulletin (SIB) 11 09 16

Show More Show Less

Radium - Split-Flow Flex Fuel Sensor Adapter

T#:53290958

Part#: 20-0589

In Stock at Vendor

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Injector Hold Down Thread Repair

T#:5175681

Part#: AGA-IHDTR-K

In Stock

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Don't let injector become lose ever again.

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 LCI ...

For LCI models only

T#:32118905

Part#: EVE-X56M-LCI-CHG

Ships in 5 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Presenting the perfect addition to our X5M, XM intake system to optimize the flow path all the way to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter all the way to the turbos. The stock inlets narrow down immediately after the connection to the intake which creates a restriction especially at higher boost levels. We have alleviated this restriction and also designed the curvature to be as smooth as possible allowing the turbos to function with reduced resistance. Made from prepreg carbon fiber with CNC machined flanges, the inlets also provide an aesthetic improvement to the engine bay. Benefits of the inlets are apparent with tuned vehicles where the boost pressure is higher and therefore the flow demand form the turbos is greater. This is where the larger volume of the carbon inlets help provide that extra flow. The performance gains are produced from providing the turbos with a less resistive flow path which allows them to reach peak boost sooner in the RPM range. When comparing to the stock inlets the differences are clear to see. Where the stock tubes narrow down immediately after the connection to the intakes, our tubes maintain a larger diameter and the reduction to the stock turbos is achieved with an internal radius on the machined flanges. This allows for larger volume whilst maintaining a smooth flow path. One of the drawbacks of the oversized inlets was the more aggressive reduction in size to match the stock turbos which created some flow constraints. NOTE: Some photos show our optional F9X X5M / X6M / G09 XM / G0X M60i Intake system available separately. Each inlet inlet set consists of: Prepreg Carbon Inlet Pair CNC Machined Turbo Flanges CNC Machined Breather Valve Assembly Compatible Models: F95 X5M LCI F96 X6M LCI G09 XM LCI G05 X5 M60i LCI G06 X6 M60i LCI G07 X7 M60i LCI ** This item is not eligible for return **

Show More Show Less

Weistec BMW S63TU W.3 Turbo Upgrade

You are required to ship Weistec your OE turbochargers as a core.

T#:22690720

Part#: 01-563-01834-1

Ships in 1 Business Day

$ 5,713.99 USD

Add to Wish List

Qty

$ 5,713.99 USD

Add to Wish List

Astonishing gains up to +343 Horsepower & 348 Torque! 100% Bolt-on installation / Upgrade. You are required to ship Weistec your OE turbochargers as a core.