Home
Intake
Intake Boots & Hoses

BMW Intake Boots & Hoses for BMW X Series G05 X5 (2019+)

The intake boot provides a pathway for air from the air flow sensor to the intake manifold. On most BMWs the boot is made of rubber with an accordian shape that allows the engine to shift and vibrate. As with any rubber component the rubber can dry out and crack and that can lead to serious running and drivability issues. A crack in the boot means that air is entering the engine that is not being monitored by the airflow sensor. The engine computer relies on data from the airflow sensor to set the fuel mixture in the engine. Excess unmetered air can result in lean condition faults, rough running, misfires, and other performance issues. For misfire and lean condition faults, check your intake boots first.

As an alternative to the original rubber, we also offer silicone boots that are both stronger and last longer with a 4-layer silicone design. Samco silicone boots can also decrease your BMW's intake turbulence and restriction by replacing the accordian design with a smoothed internal surface. Samco boots are also perfect as part of a kit to eliminate the factory traction control system (sometimes called an ASC delete boot).

Sort By:

Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW F22/23 F30/32/33/36 B...

For 2019-2023 model years

Call In Or Chat For Best Price!

T#:8076778

Part#: D760-0061

In Stock

11% off MSRP $ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Qty

11% off MSRP

$ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. More Flow: Up to 24% greater than stock. 24% increase in overall volume over OEM inlet. Average of 10.8% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

Intake Resonator Delete Pipe - G01/G02, G05/G06/G07, G30/G32 B58 ...

T#:53326245

Part#: 058917LA01

In Stock

$ 101.99 USD

Add to Wish List

Qty

$ 101.99 USD

Add to Wish List

From the factory, B58-equipped BMWs are designed to be refined and quiet. To achieve this, BMW equipped the intake tract with a bulky plastic resonator designed to cancel out the natural induction sounds of the engine. While great for a silent commute, it robs the enthusiast of the satisfying "whoosh" noise and turbo spool that make the B58 one of the most exciting engines on the market today.

Our Intake Resonator Delete Pipe is the simplest, most cost-effective way to bring that personality back to your BMW without shelling out hundreds for a full intake system. By deleting the OEM intake resonator assembly, you'll experience a drastic increase in induction noise and blow-off sounds. This hose also removes the internal chambers that create turbulence in the factory pipe, ensuring smooth, consistent airflow to the turbocharger. In short, this fully-reversible delete pipe is a must-have upgrade for owners who wish to keep their factory airbox while dramatically increasing induction noise.

Features:

Increases audible induction noise and turbocharger "blow-off" sounds
Removes the internal chambers that cause turbulence in the factory pipe, ensuring smooth, consistent airflow to the turbocharger
Precision-engineered to look like it belonged there from the factory
Perfect for those who want better sound and flow while keeping the superior filtration and heat-shielding of the OE BMW airbox
Design:

Durable four-ply fiber-reinforced silicone construction matches the exact dimensions of the factory air intake elbow (13717643302), ensuring a perfect fit
T304 stainless steel German-style worm gear hose clamps ensure a consistent seal and optimal corrosion resistance
Fully-reversible - no permanent modifications necessary!
Product Development:

Our B58 Intake Resonator Delete Pipe was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Show More Show Less