Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This Fire Wall Block Off Plate is the perfect solution for sealing off the engine bay from the cab in gutted track cars. It is pre-curved and has a bead roll to help retain its shape and keep out engine pollutants and other dangerous conditions. This plate mounts to factory locations and takes only minutes to install, needing no drilling, tapping, or welding.
Fits both left and right side drive vehicles.
Use of silicone during installation can help create a tighter seal. Also, heat-reflective material can be used to help reduce heatsoak in the cabin.
Fits the following vehicles:
E36 BMW All Sub-models
HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping.
*Does not include mounting support brackets*
This product offers the following:
Solid core, aluminum skinned, composite material
Easily replaceable
Extremely durable and flex resistant at high speeds
Satin Black top finish and unfinished bottom side
This fits the following vehicles:
E36 BMW All
This product was last offered at the strikethrough price on
05-07-2026
HARD Motorsport's window deflector pairs are a perfect option to increase the aerodynamic properties of your E46 BMW. Designed to reduced drag and resistance, these deflectors prevent air from flowing into your interior, allowing for faster acceleration times.
Features:
Compatible with HARD Motorsport polycarbonate rear windows.
Fits the following vehicles:
E36 BMW All coupe models
This Fire Wall Block Off Plate is the perfect solution for sealing off the engine bay from the cab in gutted track cars. It is pre-curved and has a bead roll to help retain its shape and keep out engine pollutants and other dangerous conditions. This plate mounts to factory locations and takes only minutes to install, needing no drilling, tapping, or welding.
Fits both left and right side drive vehicles.
Use of silicone during installation can help create a tighter seal. Also, heat-reflective material can be used to help reduce heatsoak in the cabin.
Fits the following vehicles:
E46 BMW All Sub-models
HARD Motorsport M3 fender flares offer nearly 35mm of added clearance, allowing you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the M3 Fender Style, this full kit adds an aggressive look, while still keeping a factory appearance.
The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.
Product fits the following vehicles:
E46 BMW Non-M Sedan
HARD Motorsport's window deflector pairs are a perfect option to increase the aerodynamic properties of your E46 BMW. Designed to reduced drag and resistance, these deflectors prevent air from flowing into your interior, allowing for faster acceleration times.
Features:
Compatible with HARD Motorsport polycarbonate rear windows.
Fits the following vehicles:
E46 BMW All coupe models
The V2 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style plus an additional 20mm in width, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look.
The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.
Allows fitment of up to 285/30/18 rubber on 18x10 et25 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.
Product fits the following vehicles:
E36 BMW M3 (And all other e36 coupes with M mouldings)
Inspired by the Factory BMW 320si Touring Cars used in WTCC and BTCC, these Kidney Grill Aero Plates block air from entering the engine bay, helping to reduce drag and increase vehicle aerodynamics.
Fits all E36 BMW's with a production date from 09/1996.
To keep wind drag on the rear end of your E90 335i, HARD Motorsport has developed their lightweight Aluminum Rear Diffuser Kit. It reduces undercar drag, allowing for optimal downforce.
Diffuser is unpainted and does not work with stock exhaust. Straight pipes or custom exhaust work recommended.
Fits the following vehicles:
2006-2013 E90 BMW 335i
HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping.
Includes mounting support brackets and installation hardware.
This product offers the following:
This fits the following vehicles:
E46 BMW All w/ M3 Front Bumper
HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping.
Includes mounting support brackets and installation hardware.
This product offers the following:
This fits the following vehicles:
E36 BMW All
HARD Motorsport's Motorsport Chassis Mount Wing Upright kit has everything you need to mount a rear wing to your E90 BMW. the brackets mount directly to the chassis making sure that all downforce is applied right where it is needed and not just the upper trunk area, helping to keep the low center of gravity. The upright supports match the original profile of the OEM trunk to keep it looking just as clean as it is functional. All supports are made from sturdy, lightweight aluminum. Includes all needed mounting hardware.
One of the main benefits, in addition to improved handling, is that it keeps the trunk completely functional. It uses a unique lock-pin design that that connects the upper and lower supports without requiring other special brackets or mounting points.
Product fits the following vehicles:
E90 BMW All submodels
This product was last offered at the strikethrough price on
08-14-2026
This product was last offered at the strikethrough price on
04-27-2026
This product was last offered at the strikethrough price on
04-06-2026
This product was last offered at the strikethrough price on
08-27-2026
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-07-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The V1 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look.
The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.
Allows fitment of up to 275/35/18 rubber on 18x9.5 ET35 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.
Product fits the following vehicles:
E36 BMW Sedan and "ti" models
This product was last offered at the strikethrough price on
06-07-2026