Find Parts That Fit Your Vehicle

Home
Intake
Charge Pipes & Turbo Inlets

Charge Pipes & Turbo Inlets

The factory BMW charge pipes are prone to cracking, as they are made from brittle plastic. Here at Turner, we sell several brands of replacement charge pipes that are typically made from cast aluminum. We recommend upgrading to hard charge pipes even on stock forced induction vehicles to avoid cracking - we've seen cracking occur on high mileage cars running stock power just as frequently as we do with high horsepower builds.

Sort By:

Air Intake Tube - Right - Blue - F01, F02

T#:68260

Part#: 37206789168

Ships in 4 Business Days

6% off MSRP $ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD

Add to Wish List

Qty

6% off MSRP

$ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD

Add to Wish List

Genuine BMW Air Intake Tube Right - Blau
This item fits the following BMW Chassis:
F02

Genuine BMW Connection Pipe - 11657802592 - E70 X5,E90

T#:37102

Part#: 11657802592

Ships in 3 Business Days

2% off MSRP $ 702.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 688.99 USD

Add to Wish List

Qty

2% off MSRP

$ 702.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 688.99 USD

Add to Wish List

This bypass valve acts just like a diverter valve does on normal turbocharged cars. When the engine is off throttle, this valve opens to release air pressure inside the turbocharger and closes when the throttle is engaged. Genuine BMW Connection Pipe - This item fits the following BMW Chassis: E70 X5,E90 Fits BMW Engines including: M57

Show More Show Less

Genuine BMW Preformed Seal - 11618506782

T#:36682

Part#: 11618506782

In Stock

21% off MSRP $ 22.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.99 USD

Add to Wish List

Qty

21% off MSRP

$ 22.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.99 USD

Add to Wish List

Genuine BMW Preformed Seal -
This item fits the following BMW Chassis:
F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26,N55

Show More Show Less

Kayser O-Ring

T#:584199

Part#: 13717568031

In Stock

$ 7.50 USD

Add to Wish List

Qty

$ 7.50 USD

Add to Wish List

Charge pipe to throttle body O Ring

Genuine BMW Intercooler Intake Seal - M57 N57 N20 N55

T#:568418

Part#: 13718596850

In Stock

9% off MSRP $ 11.57

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.55 USD

Add to Wish List

Qty

9% off MSRP

$ 11.57

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.55 USD

Add to Wish List

Seals the connection point between the charge air hoses at the inlet and outlet of the intercooler.

VTT Single Piece Silicone Charge Pipe w/o BOV - B58

T#:21209815

Part#: VTT-A90CP

Ships in 10 Business Days

Starting at $ 345.99 USD

Add to Wish List

Starting at $ 345.99 USD

Add to Wish List

6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi. They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. Another huge benefit is your vehicle goes from 4 connections to only TWO which are barbed and has many small ridges which dig into the silicone so it’s impossible for the pipe to blow off. This means no more blown charge pipe connections on the track or road leaving you stranded. There are other options on the market, but they only address the problem in half measures. Some offer silicone connectors that are attached to hard pipes and are notorious for blowing, but they do nothing to address the heat soak issue or the number of connections needed. This kit solves ALL of those problems and does so at a lower cost. Install is very easy and takes about an hour if you are inexperienced with working on your own car, can take as little as 30-45 minutes if you have had it apart a few times. Dimensions for the pipes are as follows: Hot Side Pipe: 64mm or 2.50' on the connection to the turbo outlet opening up immediately to 77mm or 3' and remaining a FULL 3' to the throttle body inlet. Note: These will fit all aftermarket manifolds BMS has tested, some require slight trimming of the 3' end The kit includes: VTT Hot Side Silicone Charge pipe 2 VTT Branded CNC adapters to mount the map sensor, and Temp Probe 2 VTT Branded CNC adapters for the Turbocharger outlet, and TB inlet 2 VTT branded T-Bolt Clamps 2 1/8 NPT ports are included in the TB flange for methanol

Show More Show Less

VTT Single Piece Silicone Charge Pipe W/ BOV - B58

T#:21209830

Part#: VTT-A90CPV

Ships in 10 Business Days

Starting at $ 397.99 USD

Add to Wish List

Starting at $ 397.99 USD

Add to Wish List

This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi. They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. Another huge benefit is your vehicle goes from 4 connections to only TWO which are barbed and has many small ridges which dig into the silicone so it’s impossible for the pipe to blow off. This means no more blown charge pipe connections on the track or road leaving you stranded. There are other options on the market, but they only address the problem in half measures. Some offer silicone connectors that are attached to hard pipes and are notorious for blowing, but they do nothing to address the heat soak issue or the number of connections needed. This kit solves ALL of those problems and does so at a lower cost. Install is very easy and takes about an hour if you are inexperienced with working on your own car, can take as little as 30-45 minutes if you have had it apart a few times. Dimensions for the pipes are as follows: Hot Side Pipe: 64mm or 2.50' on the connection to the turbo outlet opening up immediately to 77mm or 3' and remaining a FULL 3' to the throttle body inlet. Note: These Pipes Will Fit All Aftermarket Manifolds We Have Tested, Some Require Slight Trimming Of The 3' End The kit includes: VTT Hot Side Silicone Charge pipe 2 VTT Branded CNC adapters to mount the map sensor, and Temp Probe 2 VTT Branded CNC adapters for the Turbocharger outlet, and TB inlet 2 VTT branded T-Bolt Clamps 2 1/8 NPT ports are included in the TB flange for methanol

Show More Show Less

Genuine BMW Charge Air Induction Tract - Upper - E70,E71,F07,F10 ...

T#:43337

Part#: 13717588268

Ships in 4 Business Days

6% off MSRP $ 434.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.99 USD

Add to Wish List

Qty

6% off MSRP

$ 434.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.99 USD

Add to Wish List

Part of the charge pipe running from the throttle body to the lower charge pipe that connects to the intercooler. The pipe that connects the throttle body to the lower charge pipe can crack over time and lead to a loss in boost. Replace it with a Genuine BMW intake pipe to ensure proper air flow and performance for many years. Genuine BMW Charge Air Induction Tract - This item fits the following BMW Chassis: E70, E71,F10, F07 Fits BMW Engines including: N55

Show More Show Less

Genuine BMW Turbo Inlet Adapter - BMW G20 G22/23/26 G42 G01 G02 G29 B...

T#:601132

Part#: 11618689501

Ships in 4 Business Days

6% off MSRP $ 194.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 183.99 USD

Add to Wish List

Qty

6% off MSRP

$ 194.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 183.99 USD

Add to Wish List

This adapter pipe is located at the turbo inlet on the B58D (B58TU) engine. New seals and three captive mounting bolts are included with this adapter.

Air Intake Tube - Right - Blue - F07

T#:68266

Part#: 37206793278

Ships in 4 Business Days

3% off MSRP $ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD

Add to Wish List

Qty

3% off MSRP

$ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD

Add to Wish List

Genuine BMW Air Intake Tube Right - Blau

Select Vehicle

Purpose

Category

Home
Intake

Charge Pipes & Turbo Inlets

Brand

View All Brands

Price

Shipping