Find Parts That Fit Your Vehicle

Harmonic Balancers & Crank Pulleys

The harmonic balancer mitigates vibration and shock loads along the crankshaft. By doing this, the engine lasts longer and failures are prevented. Turner Motorsport carries BMW and high quality aftermarket options if yours has failed or become damaged.
Sort By:

Packaged by Turner - Corporate Logo
T#:1241396
Part#: TMSN54BPKT
Back Ordered
$ 565.99

This product was last offered at the strikethrough price on
09-29-2026

$ 564.99 USD
Free Shipping
$ 564.99 USD
Free Shipping
BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter Looking to go even further and upgrade your Crank Hub as well? Check out T#558924
Show More Show Less
Packaged by Turner - Corporate Logo
T#:1241397
Part#: TMSE90N55BPKT
Ships in 1-2 days
$ 624.99 USD
Free Shipping
$ 624.99 USD
Free Shipping
BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter
Show More Show Less
Packaged by Turner - Corporate Logo
T#:1241399
Part#: TMSS55BPKT
Ships on Dec 21, 2026
$ 799.99 USD
Free Shipping
$ 799.99 USD
Free Shipping
BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter Looking to go even further and upgrade your Crank Hub as well? Check out T#585961 and T#599784!
Show More Show Less

Packaged by Turner - Corporate Logo
T#:1241398
Part#: TMSF30N55BPKT
Ships on Feb 23, 2027
$ 550.99

This product was last offered at the strikethrough price on
09-29-2026

$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping
BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate ECS Kevlar reinforced accessory belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter
Show More Show Less

Corteco - Corporate Logo
T#:592807
Part#: 11238511371
In Stock
$ 414.99 USD
Free Shipping
$ 414.99 USD
Free Shipping
This harmonic balancer reduces vibrations and connects accessories
Corteco - Corporate Logo
T#:591600
Part#: 11237564969
Ships in 2 Business Days
$ 355.99 USD
Free Shipping
$ 355.99 USD
Free Shipping
Reduces vibrations and connects accessories

Corteco - Corporate Logo
T#:591598
Part#: 11231438995
Ships in 2 Business Days
$ 341.99 USD
Free Shipping
$ 341.99 USD
Free Shipping
Reduces vibrations and connects accessories
Corteco - Corporate Logo
T#:591599
Part#: 11237513862
Ships in 1-2 days
$ 156.63 USD
Free Shipping
$ 156.63 USD
Free Shipping
Reduces vibrations and connects accessories

M7 Speed - Corporate Logo
T#:12774050
Part#: 53-3M7101-0
In Stock
$ 159.99

This product was last offered at the strikethrough price on
08-31-2026

$ 140.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 159.99

This product was last offered at the strikethrough price on
08-31-2026

$ 140.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up

M7 Speed - Corporate Logo
T#:584439
Part#: 53-3M7101-4
Back Ordered
Sale - Save 5% $ 159.99

This product was last offered at the strikethrough price on
08-31-2026

$ 151.77 USD
Free Shipping
Sale - Save 5%
$ 159.99

This product was last offered at the strikethrough price on
08-31-2026

$ 151.77 USD
Free Shipping

M7 Speed 4% Oversize Crankshaft Pulley for MINI Cooper

Unlocking Performance

The M7 Speed 4% oversize crankshaft pulley is your ticket to unlocking the hidden potential of your MINI Cooper. This performance-enhancing pulley is designed to add power, acceleration, and overall performance to your beloved MINI. Here's how it does the trick:

Performance Boost:

  • Safely speeds up your supercharger, delivering a significant "low end" boost and torque.
  • The result? Your MINI Cooper takes off with newfound energy and responsiveness.

Lightweight Advantage:

  • Weighing just 13 ounces, this pulley is a remarkable 88.5% lighter than the factory version.
  • Reduced crankshaft rotational mass equals more horsepower, torque, and improved throttle response.

Advanced Design

The M7 Speed 4% Crank Pulley isn't just about performance; it's also a work of art. Crafted with advanced computer modeling and precision CNC machining, it's a blend of form and function:

Materials:

  • Made in the USA from billet 6061-T6 aerospace-grade aluminum alloy.
  • Features a deep black anodized coating and laser etching for a sleek look.

Precision Machining:

  • Micro V-Belt grooves meet SAE J1459 specifications to minimize belt slippage, especially at maximum boost.

Optimal Fit:

Use it in conjunction with the M7 Speed 16% Supercharger Technology Pulley for peak performance in MINI tuning.

Reliable Performance

From the factory, MINI lacks a positive drive key on the crankshaft snout to drive the lower pulley. Most aftermarket pulleys are slip-fit and rely on the bolt to prevent slippage. The M7 Speed crank pulley is engineered differently:

Interference Fit:

The pulley is interference-fit onto the crankshaft, ensuring zero slippage even at high RPMs.

Features at a Glance:

  • Super Lightweight: Only 13 ounces (0.3 kg)
  • Sheds 6.2 lbs (2.8 kg) compared to stock
  • Achieves perfect balance through a symmetric design and precision machining
  • Includes a high-quality ARP Racing bolt and precision ground flat washer
  • Installation is a breeze

Unleash Your MINI's Potential

Proudly made in the USA, the M7 Speed 4% Oversize Crankshaft Pulley is the upgrade your MINI Cooper deserves. Unleash its hidden power and enjoy a new level of performance, reliability, and overall driving pleasure. Get ready to experience the difference.

Show More Show Less