Crankshaft Pulleys & Harmonic Balancers

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

N54 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N54 3.0...

T#:1241396

Part#: TMSN54BPKT

Back Ordered

Sale - Save 6% $ 541.99

This product was last offered at the strikethrough price on
05-03-2026

$ 509.74 USD

Add to Wish List

Qty

Sale - Save 6%

$ 541.99

This product was last offered at the strikethrough price on
05-03-2026

$ 509.74 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter Looking to go even further and upgrade your Crank Hub as well? Check out T#558924

Show More Show Less

ALTA Crank Pulley - 2% - R52 R53

T#:26238480

Part#: AMPENG520

In Stock at Vendor

Sale - Save 11% $ 129.99

This product was last offered at the strikethrough price on
07-17-2026

$ 116.28 USD

Add to Wish List

Qty

Sale - Save 11%

$ 129.99

This product was last offered at the strikethrough price on
07-17-2026

$ 116.28 USD

Add to Wish List

Enhance the performance of your Mini with the ALTA Lightened Crank Pulley (LCP), engineered to increase horsepower and torque. Available in 0% Stock Sized and +2% Oversized options, this pulley is crafted from 6061T6 aluminum, weighing only 0.65 lbs. Significantly lighter than the stock crank pulley, the ALTA LCP ensures improved engine efficiency without adding vibration or noise. The +2% Oversized pulley provides additional boost for Supercharged Cooper S models, delivering safe and reliable performance. With increased belt contact, this pulley reduces wear and enhances durability, making it a must-have upgrade for Mini enthusiasts.

Increases horsepower and torque
Lightweight 6061T6 aluminum construction
Available in 0% Stock Sized and +2% Oversized options
Does not affect charging system
Improves engine efficiency and performance

Show More Show Less

N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N55 3.0...

T#:1241397

Part#: TMSE90N55BPKT

In Stock

$ 576.99

This product was last offered at the strikethrough price on
07-22-2026

$ 576.37 USD

Add to Wish List

Qty

$ 576.37 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter

Show More Show Less

ALTA Crank Pulley - 0% (Stock Size) MINI W11 1.6L Engine

T#:394899

Part#: AMPENG500

In Stock at Vendor

Sale - Save 11% $ 129.99

This product was last offered at the strikethrough price on
07-17-2026

$ 116.28 USD

Add to Wish List

Qty

Sale - Save 11%

$ 129.99

This product was last offered at the strikethrough price on
07-17-2026

$ 116.28 USD

Add to Wish List

ALTA Lightweight Crank Pulley (LCP) for Mini

Upgrade your Mini's performance with the ALTA Lightweight Crank Pulley (LCP), designed to increase horsepower and torque. Available in two sizes - 0% Stock Sized and +2% Oversized - this pulley is engineered for Supercharged Cooper S models. Crafted from 6061T6 aluminum, the ALTA pulley is lightweight, weighing just 0.65 lbs, providing a weight reduction of over 2.3 lbs compared to the stock crank pulley.

Increases horsepower and torque
Lightweight design reduces rotational mass
Does not wear out engine bearings or oil pump
Adds boost safely and reliably
Improves belt contact with pulleys, reducing wear

Show More Show Less

S55 "Bulletproof" Crank Hub & Serpentine Kit - BMW F8X S55 3.0L ...

T#:1241399

Part#: TMSS55BPKT

Ships on Oct 5, 2026

Sale - Save 3% $ 794.99

This product was last offered at the strikethrough price on
07-07-2026

$ 769.97 USD

Add to Wish List

Qty

Sale - Save 3%

$ 794.99

This product was last offered at the strikethrough price on
07-07-2026

$ 769.97 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter Looking to go even further and upgrade your Crank Hub as well? Check out T#585961 and T#599784!

Show More Show Less

N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW F22/23 F3X N55 3.0...

T#:1241398

Part#: TMSF30N55BPKT

In Stock

Sale - Save 6% $ 520.99

This product was last offered at the strikethrough price on
05-03-2026

$ 491.62 USD

Add to Wish List

Qty

Sale - Save 6%

$ 520.99

This product was last offered at the strikethrough price on
05-03-2026

$ 491.62 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate ECS Kevlar reinforced accessory belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter

Show More Show Less

Harmonic Balancer Replacement Kit - S55

T#:641974

Part#: 11237853850KT1

Ships on Oct 5, 2026

$ 1,099.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,073.99 USD

Add to Wish List

Qty

$ 1,073.99 USD

Add to Wish List

The harmonic balancer on the S55 is designed to keep unwanted vibrations from destroying the engine. If your harmonic balancer is worn out or damaged your engine is at risk of possible catastrophic failure. This kit contains all of the components commonly replaced when servicing the harmonic balancer, including serpentine belts and mounting hardware.

Show More Show Less

Basic Vibration Damper Replacement Kit w/ Specialty Tool Kit - E70 X5...

T#:27672134

Part#: 11238511371TKT6

Ships in 7 Business Days

Sale - Save 1% $ 577.99

This product was last offered at the strikethrough price on
05-03-2026

$ 573.43 USD

Add to Wish List

Qty

Sale - Save 1%

$ 577.99

This product was last offered at the strikethrough price on
05-03-2026

$ 573.43 USD

Add to Wish List

The vibration damper in the E70 X5 35d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This basic kit includes the components necessary to replace your damper with an OEM damper from Corteco, including two belts and the Corteco Vibration Damper pulley. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further

Show More Show Less

Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E70...

T#:27672133

Part#: 11238511371TKT5

Ships in 7 Business Days

Sale - Save 3% $ 714.99

This product was last offered at the strikethrough price on
02-10-2026

$ 696.95 USD

Add to Wish List

Qty

Sale - Save 3%

$ 714.99

This product was last offered at the strikethrough price on
02-10-2026

$ 696.95 USD

Add to Wish List

The vibration damper in the E70 X5 35d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This kit includes all of the components necessary to replace your damper with an OEM damper from Corteco, including belts, pulleys, hardware, and more. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further

Show More Show Less

Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90...

T#:27672135

Part#: 11238511371TKT7

Ships in 2 Business Days

$ 751.37 USD

Add to Wish List

Qty

$ 751.37 USD

Add to Wish List

The vibration damper in the 335d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This kit includes all of the components necessary to replace your damper with an OEM damper from Corteco, including belts, pulleys, hardware, and more. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further

Show More Show Less

Basic Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90 33...

T#:27672136

Part#: 11238511371TKT8

Ships in 2 Business Days

$ 561.99

This product was last offered at the strikethrough price on
05-03-2026

$ 559.34 USD

Add to Wish List

Qty

$ 559.34 USD

Add to Wish List

The vibration damper in the 335d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This basic kit includes the components necessary to replace your damper with an OEM damper from Corteco, including two belts and the Corteco Vibration Damper pulley. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further

Show More Show Less

Project Cars

SELECT YOUR BMW

Crankshaft Pulleys & Harmonic Balancers

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

N54 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N54 3.0...

ALTA Crank Pulley - 2% - R52 R53

N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N55 3.0...

ALTA Crank Pulley - 0% (Stock Size) MINI W11 1.6L Engine

ALTA Lightweight Crank Pulley (LCP) for Mini

S55 "Bulletproof" Crank Hub & Serpentine Kit - BMW F8X S55 3.0L ...

N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW F22/23 F3X N55 3.0...

Harmonic Balancer Replacement Kit - S55

Basic Vibration Damper Replacement Kit w/ Specialty Tool Kit - E70 X5...

Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E70...

Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90...

Basic Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90 33...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results