Find Parts That Fit Your Vehicle

BMW Maintenance & Tune-Up Parts

Part of owning a BMW is the relationships we develop with our cars through years of driving pleasure and maintenance services alike. It is critical to guarantee the job is right the first time. With recommended OEM supplied components and by following the maintenance schedule, your BMW is sure to continue giving you years of enjoyment on the street or track. All the filters, service kits, service manuals, fluids, and more are right here to help keep your BMW in perfect shape.

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:38890884
Part#: BMS-N54-DCIR-R
Back Ordered
$ 79.00 USD
Free Shipping on orders $49 and up
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:556765
Part#: BMS-N54-DCI-R
EO#: D-744-2
In Stock
$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Show More Show Less
Burger Motorsports - Corporate Logo
T#:556768
Part#: BMS-N54-DCI-B
EO#: D-744-2
In Stock
$ 109.00 USD
Free Shipping
$ 109.00 USD
Free Shipping

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Show More Show Less

MMX Performance - Corporate Logo
T#:22723756
Part#: MMR03-0504
Ships in 2 Business Days
$ 37.99 USD
Free Shipping on orders $49 and up
$ 37.99 USD
Free Shipping on orders $49 and up

Burger Motorsports - Corporate Logo
T#:38890886
Part#: BMS-N54-DCIR-B
In Stock
$ 89.00 USD
Free Shipping on orders $49 and up
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
MMX Oil Filler Cap - Black
For Most BMW Models 2007 Onwards or Mini Models
MMX Performance - Corporate Logo
T#:4552062
Part#: MMR03-0102-BL
In Stock
$ 127.99 USD
Free Shipping on orders $49 and up
MMX's Performance billet oil filler cap machined from billet T-6061 aluminum has been designed to instantly give your engine bay an subtle aesthetic upgrade. This cap comes in a Black finish. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur. Reusing of original seal is required.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:552591
Part#: BMS-COWL-FILTE90
Ships in 1-2 days
$ 69.00 USD
Free Shipping
$ 69.00 USD
Free Shipping

Removing the cowl saves weight, simplifies maintenance, and lowers underhood temps. Keep things clean and free of debris with these BMW cowl filters. Dry filters will require little to no maintenance and are a great compromise when removing the cowl.

 

Fits the following BMWs:
E82 E88 1 Series
E90 E91 E92 E93 3 Series

Show More Show Less
MMX Performance - Corporate Logo
T#:4552065
Part#: MMR03-0101-BL
Ships in 2 Business Days
$ 142.99 USD
Free Shipping
$ 142.99 USD
Free Shipping
If you are looking for peace of mind over the prone to cracking OEM plastic housing cap, this oil filter housing cap by MMX may be exactly what you are looking for. Composed of billet aluminum, this cap is light, durable, and dresses up your engine bay! Comes finished with a polished anodized dark anthracite coating. Installation is simple as it can be replaced while completing an oil change. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:556769
Part#: BMS-N54-DCI-W
Ships in 5 Business Days
$ 109.00 USD
$ 109.00 USD

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Show More Show Less

Burger Motorsports Drop-In Air Filter - N54 135/335/535
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:556764
Part#: BMS-N54-DIAF
Ships on Oct 26, 2026
$ 65.00 USD
$ 65.00 USD

Looking to improve your intake without having to tear apart your engine bay? Then this drop-in performance air filter may be the perfect option for you! Allowing for much higher and easier air flow than the stock BMW filter, this filter allows your engine to breathe much easier at any RPM, freeing up horsepower and torque that normally would have been locked away.

Thanks to the direct replacement style of this filter, no modifications need to be made to the intake components. Just pull out your old filter, place this filter in the stock location, and enjoy!

Show More Show Less
Burger Motorsports - Corporate Logo
T#:38890885
Part#: BMS-N54-DCIR-W
Ships on Oct 26, 2026
$ 84.00 USD
Free Shipping on orders $49 and up
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
MMX Performance - Corporate Logo
T#:29035359
Part#: MMR17-1502
Special Order: No Guaranteed ETA
$ 81.99 USD
Free Shipping on orders $49 and up
Get rid of the notorious B58 oil filter disintegration problem forevermore with the MMR Performance Oil Filter. By replacing the factory paper filter element with MMR’s advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter’s collapse failure. The oil filters on BMW’s B58 & B57 3.0 6-cylinder engines (both petrol and diesel) suffer from a well-documented quality problem with the factory paper-element oil filter. At service time, when removal of the filter is attempted, the bottom section frequently breaks away from the disintegrated filtration material. This leaves the broken base stuck in the oil filter housing and an expensive removal/replacement job to extract the remains and fit a new housing. Such is the problem that there’s even an official BMW technical bulletin to warn their dealers of this. The MMR replacement Oil Filter is a pretty special replacement filter. It fixes this annoying problem once and for all. The MMR Oil Filter element is made from a pleated high-flow stainless steel micronic filter cloth – a medical-grade material guaranteed to filter out oil contamination right down to 20 Microns, ensuring far better protection than paper-based filters can achieve. As well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across entire filter surface. The failure of the factory oil filter generally just leads to a large bill to extract the damaged remnants. However, more worryingly, it has occasionally been known to lead to broken pieces of filter media running through the small oilways and orifices of the engine’s lubrication system, risking blocking the oil running round the bearings and VANOS system and causing much greater mechanical damage before it is caught. The MMR Oil Filter is a reusable unit which can be used over and over again. As long as it is thoroughly cleaned at each oil change, it will last the lifetime of the vehicle and keep on protecting the engine just as it did when new. However, proper cleaning is not necessarily a DIY job, as it requires the use of a suitable solvent to break down the old oil, and cleaning from the inside out with compressed air to remove any risk of debris remaining. If you have any doubts about this, we recommend as best-practice to change filter with every oil-change. The MMR Oil Filter is a lifetime reusable filter. But to resuse and avoid any future loss of filtration or oil flow, it is essential that it is thoroughly cleaned at each oil change as follows: Remove MMR Oil Filter from filter housing Remove 3x O-Rings from MMR Oil Filter prior to Step 3, as fuel will degrade and cause damage to these rubber/Viton components. Soak the filter one of the following fluids for 5-10 minutes – Petrol/Gasoline or Carb Cleaner or Soap and Water Agitate/stir every few minutes until the outer surface is free of any engine debris Dry the filter using compressed air, blow air through the filter, (do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution. Once dry, reinstall O-Rings (MMR advices replacement of these O-Rings every oil service - See ES4810064) and refit into oil filter housing and engine. If you have any doubt about your ability to perform this sequence, we recommend replacing the filter element with each oil change.
Show More Show Less


Purflux - Corporate Logo
T#:590411
Part#: 13717558382
Back Ordered
$ 20.99 USD
Free Shipping on orders $49 and up
$ 20.99 USD
Free Shipping on orders $49 and up
Purflux - Corporate Logo
T#:50934286
Part#: 11427622446KT9KT
In Stock
$ 8.30 USD
Free Shipping on orders $49 and up
Replacing your filter with a high quality unit ensures harmful contaminants are trapped for good, keeping your engine running clean
Purflux - Corporate Logo
T#:583719
Part#: 11427622446
In Stock
$ 7.29 USD
Free Shipping on orders $49 and up

Keep your engine in top condition with ECS Tuning's replacement oil filters, designed for Gen 2 MINIs. These filters are crucial in protecting your engine from contaminants, preventing premature wear and failure.

  • Safeguards against contaminants for extended engine life
  • Promotes lasting engine performance
  • Filters out harmful particles for engine efficiency
  • Prevents contaminants from re-entering the engine
  • Includes filter element and o-ring
  • Wide selection of high-quality replacement lubricants available
  • Diverse range of fuel, air, and cabin air filters for optimal car performance
  • Oil filter housing cap tool (ES#:240947) for easy removal

Visit ECS Tuning's website for other filter replacements and ensure your car runs brilliantly.

Show More Show Less

Replacement Intake Coupler - Priced Each
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:583384
Part#: INTAKECOUPLER
Ships in 1 Business Day
$ 15.00 USD
Free Shipping on orders $49 and up

MMX Performance - Corporate Logo
T#:4524482
Part#: MMR01-0702
Special Order: No Guaranteed ETA
$ 102.99 USD
Free Shipping
$ 102.99 USD
Free Shipping
Replacement performance panel air filter for your N20 engine. Upgrade your engines breathing capabilities with a simple to install air filter! MMX's performance air filter is constructed of cotton gauze and easily drops into the OE airbox. The result is excellent filtration properties, instant performance increase, and extra induction noise. Features Increased engine performance Improved induction noise Fits OE air filter housing Easy installation and completely washable
Show More Show Less
MMX Performance - Corporate Logo
T#:28968889
Part#: MMR03-1601
Special Order: No Guaranteed ETA
$ 127.99 USD
Free Shipping on orders $49 and up

MMX Performance - Corporate Logo
T#:29035360
Part#: MMR17-0000
Special Order: No Guaranteed ETA
$ 13.99 USD
Free Shipping on orders $49 and up
Genuine MMR Performance O-Ring service kit for the MMX Performance oil filter and billet housing. Does not include MMR oil filter or billet housing, only the four O-Rings needed to service our reusable filter. The MMR Performance oil filter and housing contains four O-Rings within the kit. We recommend you replace the O-Ring set on a regular basis when changing or cleaning the MMR filter, in order to maintain the integrity of the sealing properties it was designed to provide. As it's a direct replacement with the original O-Ring set supplied, it's a very straightforward process to swap and replace. Fitment is limited to the MMR Performance oil filter (MMR17-1502 - See ES4810063) to protect against the notorious B58 oil filter collapse
Show More Show Less