BMW makes their cylinder heads from aluminum. While this is beneficial for many reason, they do not react well to overheating. Especially prevalent on older BMW engines, and over-temp situation has been known to cause the head to warp. Turner Motorsport carries Genuine BMW replacement heads and parts to make your next rebuild a success.
Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm
Show More Show Less
Stock replacement hydraulic valve lifter for the M52, M54 and S50 S52 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the camshafts. This item fits the following BMWs: 1995-1998 E36 BMW 323is 323ic 328i 328is 328ic M3 1997-2003 E39 BMW 525i 528i 530i M5 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi 2004-2005 E60 BMW 525i 530i 2004-2005 E83 BMW X3 2.5i X3 3.0i 2000-2006 E53 BMW X5 3.0i 1996-2002 E36/7 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i 1998-2000 E36/7 BMW M Roadster M Coupe
Show More Show Less
Rocker arms work in conjunction with your camshafts and valves, applying pressure from the camshaft to open and close your intake and exhaust valves. If your rocker arm rollers have failed, this can lead to extreme camshaft damage, requiring the camshaft to be replaced. Replace your rockers whenever servicing your camshafts or replacing your hydraulic lifters to ensure long-term engine reliability.
Show More Show Less
Experience a new level of high performance with the upcoming Kelford Cams S58 Camshafts, exclusively at ECS Tuning. Kelford Cams is renowned for its precision-engineered camshafts and valvetrain components, and they're currently in the process of crafting camshafts tailored specifically for the S58 engine, found in BMW G80/G81/G82/G83, X3M, F97 X3M, and F98 X4M models. These camshafts, inspired by the successful design principles of the B58 Camshafts, will focus on rapid spooling and optimizing power throughout the RPM range. BMW S58 | Stage 1 Street | Strip | Circuit Race | Road Race | Roll Race | Drift | E85 288° / 268° - 10.30mm / 10.15mm Valve Lift BMW M Series camshafts are designed for S58 engines with bolt-on intake, exhaust, and turbo upgrades. For engines producing around 600-850hp running a 60-68mm turbo. Maintains full use of Valvetronic and Dual VANOS for great throttle response and wide power band. Must have valve spring upgrade. Kelford recommends their High-Performance Valve Spring Kit BMW S58 | Stage 2 Strip | Drag Race | Circuit Race | Road Race | Roll Race | Drift | E85 292° / 280° - 10.40mm / 10.60mm Valve Lift BMW M Series Racing Camshafts professionally built BMW S58 engines making 800hp-1400hp. Turbo sizing 66-75mm. Great with aftermarket intake plenums. Maintains full use of Valvetronic and Dual VANOS. Can run Valvetronic locked in the fully open position when using an aftermarket throttle body. Must have valve spring upgrade. Kelford recommends their High-Performance Valve Spring Kit Note: Must check intake intermediate rockers for clearance to the new racing cam lobe; OEM pressed steel rockers have sharp edges which may damage the bigger cam lobe. Trim and deburr as necessary. BMW S58 | Stage 3 Strip | Drag Race | Roll Race | Drift | E85 | Methanol 298° / 288° - 10.40mm / 10.80mm Valve Lift BMW M Series Stage 3 drag racing cams designed for professionally built S58 engines producing 1400hp+. Turbo sizing 76mm+ on high boost. Ethanol blend or methanol. Must have valve spring upgrade. Kelford recommends their High-Performance Valve Spring Kit Please Note: Must check intake intermediate rockers for clearance to the new racing cam lobe; OEM-pressed steel rockers have sharp edges which may damage the bigger cam lobe. Trim and deburr as necessary. All engine modifications should be performed by a qualified professional to ensure a proper and safe installation process and a reliable, optimally performing engine.
Show More Show Less
