Turbo Lines & Hoses

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

T#:43109033

Part#: BMS-HFSTI-FN55

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.

Show More Show Less

N54 Turbo Boost Leak Tester - BMW 3-Series E9X N54 3.0L

T#:641167

Part#: BMW-N54-CAP

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

This Boost Leak Tester kit mounts inside both of the flexible intake hoses that lead to your turbo's compressor inlet flanges. You will need to remove the air box (or your aftermarket air filters) to expose the 2 intake pipes. Install the testers in each pipe and pressurize the system using the tire schrader with your tire inflation tool. The kit comes with the necessary caps to block the diverter valve return flanges on the intake pipes, also a cap to block the breather line at the bakc of the valve cover. Once the kit is installed, use compressed air to charge the system and you will see that both gauges read the compressor pressure you are filling with. You'll be able to test the turbo to the motor checking all leak points in between, including intercooler, clamped connections, intake manifold, divertor valves and the many random potential leak points. Note: Testing at the intake pipe, you may hear noise coming from the o-ring (at ~12 psi test pressure) that seals the intake pipe to the turbo inlet from debris. This is not a boost leak, these are not meant to see boost and not intended to be perfectly sealed, however hearing this hissing may be mis-diagnosed as a leak. In this case reduce the pressure. If no obvious leaks are heard in any other location, the test is complete and there are no significant leaks The gauge on the boost leak tester allows the user to: apply a safe amount of pressure to prevent injury or damage to the charge pipes or engine read how fast the system holds and bleeds air after removing the air source give a good comparison of compressor outlet air Vs. boost test air while pressurizing. The smaller the difference the lesser the air loss in the system Design Features: Plastic End Caps with 1/8" NPT threaded gauge port & fitting port Boost Gauges with 30 PSI / 1Bar Boost Gauge Universal Tire Schrader Valve (can be removed and tapped for 1/4" NPT thread fitting if desired) (2) Stainless Steel T-Bolt Clamps with Teflon lock-nut (3) Vinyl Caps for diverter valve return and valve cover breather

Show More Show Less

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

T#:23880741

Part#: N54STCCPBO

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.

Show More Show Less

N54 Aluminum Turbo Outlet Boost Pipe - 135, 535, 1M, Z4

2X Entries Into Our F80 M3 Sweepstakes

T#:5788175

Part#: VTT-ALUM-OUTLET

Ships on Oct 27, 2026

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Looking to get the most efficient turbocharger operation out of your N54 powered BMW? The best way to do this is to remove all restrictions from the inlet, and charge tract. The factory charge pipe has a very small 1″ opening and a poorly designed Y section that couples the two banks into one before entering the intercooler. This VTT N54 Aluminum outlet gets rid of those restrictions and provides a full 1.5″ from the turbochargers to a smooth Y transition into a 2.5″ outlet to fit most aftermarket intercoolers. Do not be fooled by companies trying to sell you oversized 2″ charge pipes, these are not going to pick up any power, and will kill velocity. The smallest diameter you can run while still providing adequate flow is always best for flow velocity and reducing time to TQ. This outlet is powder-coated black for a durable finish. The outlet is available in V-band connection for Stock, Stage 1, Stage 2, Stage 2+, any aftermarket turbo that uses the stock connection (RB, Pure, TTE, ETC. It is also available in Hose barb connection for our GC, GC Lite line up., as well as with 1.5″-2″ silicone adapters to fit MMP turbos.

Show More Show Less

S55 Cold Side J-Pipe Charge Pipe

2X Entries Into Our F80 M3 Sweepstakes

T#:597645

Part#: VTT-S55-CHARGE-1

Ships on Oct 27, 2026

$ 167.99 USD

Add to Wish List

Qty

$ 167.99 USD

Add to Wish List

Replace your plastic OEM charge pipe with the aluminum charge pipe from Vargas Turbo Technologies. Once you start turning up the boost on the S55 the stock charge pipe from the intercooler to the throttle body becomes a ticking time bomb until it explodes leaving your stranded. This Charge pipe is made from mandrel bent aluminum with CNC flange, and 1/8' NPT port for methanol injection.

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270240

Part#: GARROUTT4G4045

Ships on Oct 27, 2026

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Vanos Banjo Oil Supply Fitting

T#:13463756

Part#: VANOSBOSF1

Ships on Nov 4, 2026

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The easiest way to supply your turbo or supercharger with oil!

VTT Turbocharger Inlet Flange - 2" Sch 10 - Garrett G25/G30/G35 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270239

Part#: GARING25

Ships on Oct 27, 2026

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Unlock the full potential of your Garrett G-Series turbocharger with the VTT-FAB Precision Inlet Flange.

Vargas Single Piece Silicone Cold Side Charge Pipe - BOV HKS - BMW EX...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270294

Part#: SILCPN54HKS2

Ships on Oct 27, 2026

$ 464.99 USD

Add to Wish List

Qty

$ 464.99 USD

Add to Wish List

Upgrade your N54’s breathing capabilities with the VTT Silicone Charge Pipe, specifically configured for enthusiasts running an HKS BOV.

Vargas Silicone Inlet Pipes - Black - BMW G8X M2, M3, M4

2X Entries Into Our F80 M3 Sweepstakes

T#:52164907

Part#: S58INTPBLK

Ships on Oct 27, 2026

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

Upgrade your S58’s reliability and power with the VTT Silicone Inlet Pipe Kit.

Vargas Single Piece Silicone Cold Side Charge Pipe - BMW EXX N54 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270293

Part#: SILCPN54HKS1

Ships on Oct 27, 2026

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Upgrade your BMW's intercooler piping with the Vargas Turbo Technologies Silicone Charge Pipe, the easiest-to-install N54 charge pipe on the market.

VTT N54 GC Lite 2.0 Stock Location Turbo Kit - 335 - With Silicone In...

2X Entries Into Our F80 M3 Sweepstakes

T#:35154931

Part#: VTTN54GCL2STOCK

Ships on Oct 27, 2026

$ 3,809.99 USD

Add to Wish List

Qty

$ 3,809.99 USD

Add to Wish List

Vargas turbochargers feature a complete redesign of key components, including the compressor housing, bearing housing, and turbine housing. These turbos are specifically engineered to fit in the stock N54 location while offering the flow capacity of much larger units. Every detail has been carefully designed to meet our performance, flow, and reliability objectives. The result is a turbo that fits the stock location and supports up to 700WHP. To achieve this, the internal areas of the manifolds, turbine, and compressor housings have been expanded. Additionally, the AR ratio of the turbine housing has been slightly increased to enhance flow without compromising spool time. Simply put, no other turbocharger—whether single or twin—can match the spool, ease of fitment, power, or reliability of our “GC LITE” turbos, which are capable of delivering 700WHP.

Show More Show Less

Vargas Plug & Play Upgraded DV Kit - Single DV, Dual Port - BMW G9X ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270292

Part#: S68DVSINGDP

Ships on Oct 27, 2026

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The VTT S68 Upgraded DV Kit is an essential upgrade for owners of the G90 M5 or BMW XM looking to move beyond the limitations of factory hardware.

F8X M3/M4 S55 Vargas Silicone Turbo Manifold Pipes

2X Entries Into Our F80 M3 Sweepstakes

T#:390443

Part#: VTTS55-SIL-CP

Back Ordered

Starting at $ 399.00 USD

Add to Wish List

Starting at $ 399.00 USD

Add to Wish List

These extra-strength silicone pipes replace the plastic pipes coming from the turbos to the top-mount intercooler on the M3/M4. Since the stock pipes are plastic there is the potential for cracks and boost leaks which will surely spoil the fun.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

N54 Turbo Boost Leak Tester - BMW 3-Series E9X N54 3.0L

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

N54 Aluminum Turbo Outlet Boost Pipe - 135, 535, 1M, Z4

S55 Cold Side J-Pipe Charge Pipe

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

Vanos Banjo Oil Supply Fitting

VTT Turbocharger Inlet Flange - 2" Sch 10 - Garrett G25/G30/G35 ...

Vargas Single Piece Silicone Cold Side Charge Pipe - BOV HKS - BMW EX...

Vargas Silicone Inlet Pipes - Black - BMW G8X M2, M3, M4

Vargas Single Piece Silicone Cold Side Charge Pipe - BMW EXX N54 ...

VTT N54 GC Lite 2.0 Stock Location Turbo Kit - 335 - With Silicone In...

Vargas Plug & Play Upgraded DV Kit - Single DV, Dual Port - BMW G9X ...

F8X M3/M4 S55 Vargas Silicone Turbo Manifold Pipes

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results