Find Parts That Fit Your Vehicle

Oil Cap

The oil cap covers the vital part of the engine where oil is added. If yours is cracked, replace it to avoid a troublesome vacuum leak. We also carry a variety of aftermarket caps for a simple way to dress up your engine bay.
Sort By:
Billet Oil Filter Cap
Billet Oil Filter Cap
Burger Motorsports - Corporate Logo
T#:21045489
Part#: BMS-OFC
In Stock
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA
Show More Show Less
Billet Oil Filter Cap
Billet Oil Filter Cap
Burger Motorsports - Corporate Logo
T#:21045500
Part#: BMS-BOFC
In Stock
Starting at $ 79.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 79.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner. Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap. Be sure to replace the exterior o-ring gasket also when installing. Features and Benefits Solid aluminum design is much stronger than brittle plastic Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter insert and o-ring Anodized for protection Looks great under the hood Available in black, red, silver, and blue Made in the USA
Show More Show Less
AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Various BMW and MINI models
AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...
AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 64.99 USD
Free Shipping on orders $49 and up
Add to Wish List
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.
Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Breather To -10AN Fitting - BMW S58 3.0L
Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Brea...
Burger Motorsports - Corporate Logo
T#:46924978
Part#: S58OFBC-90F
Ships on Aug 10, 2026
$ 89.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 89.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. This kit includes a -10ORB 90º breather to -10AN Fitting to connect to an oil catch can of your choice.
Show More Show Less
AUTOTECKNIC Dry Carbon Competition Oil Cap Cover - G42 2-SERIES COUPE
AUTOTECKNIC Dry Carbon Competition Oil Cap Cover - G42 2-SERIES COUPE...
AUTOTECKNIC - Corporate Logo
T#:21209809
Part#: ATK-BM-0008-G42-
Ships in 8 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 65.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time! Dry carbon fiber is formed using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. On top of that they coat this product in a UV resistant coating extending the life of this cap significantly! Don't wait and get yours today! You will not be disappointed by the fit and finish!
Show More Show Less
Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block Off Cap - BMW S58 3.0L
Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block...
Burger Motorsports - Corporate Logo
T#:46924975
Part#: S58OFBC-BO
Ships on Aug 10, 2026
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. A removable black block off cap is included to use the cap with no ventilation, but any custom ventilation solution using a -10ORB fitting can be used with this oil filler breather cap.
Show More Show Less
AUTOTECKNIC Dry Carbon Competition Oil Cap Cover - G87 M2
AUTOTECKNIC Dry Carbon Competition Oil Cap Cover - G87 M2
AUTOTECKNIC - Corporate Logo
T#:21045531
Part#: ATK-BM-0008-G8X-
Ships in 8 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 65.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time!
Show More Show Less
Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block Off Cap - BMW S68 3.0L
Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block...
Burger Motorsports - Corporate Logo
T#:46924976
Part#: S68OFBC-BO
Back Ordered
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. A removable black block off cap is included to use the cap with no ventilation, but any custom ventilation solution using a -10ORB fitting can be used with this oil filler breather cap.
Show More Show Less
Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Breather To -10AN Fitting - BMW Gen2 B58 3.0L
Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Brea...
Burger Motorsports - Corporate Logo
T#:46924977
Part#: B58OFBC-90F
Back Ordered
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. This kit includes a -10ORB 90º breather to -10AN Fitting to connect to an oil catch can of your choice.
Show More Show Less
Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Breather To -10AN Fitting - BMW S68 3.0L
Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Brea...
Burger Motorsports - Corporate Logo
T#:46924979
Part#: S68OFBC-90F
Back Ordered
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. This kit includes a -10ORB 90º breather to -10AN Fitting to connect to an oil catch can of your choice.
Show More Show Less
Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block Off Cap - BMW Gen2 B58 3.0L
Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block...
Burger Motorsports - Corporate Logo
T#:46924974
Part#: B58OFBC-BO
Back Ordered
$ 82.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 82.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. A removable black block off cap is included to use the cap with no ventilation, but any custom ventilation solution using a -10ORB fitting can be used with this oil filler breather cap.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$