Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
The Powerflex Front Sway Bar Bushings - 28.2mm (Black Series) for the BMW F10/F11 5 Series are a specialized upgrade designed for drivers who seek high-performance handling and stability, especially in demanding driving conditions like track days or spirited road use.
Black Series - Track-Ready Performance: The Black Series bushings are engineered for maximum rigidity, offering far less flex than the original rubber bushings. This increased stiffness allows the sway bar to function more effectively, improving the car’s resistance to body roll and delivering a sharper, more responsive steering feel. These bushings are built for those pushing their cars to the limit on the track.
Precise Handling Improvement: By upgrading the front sway bar bushings to these Black Series units, you will notice a marked improvement in handling precision. The front end becomes more composed during hard cornering, providing better feedback and quicker responses to driver inputs, crucial for high-performance driving scenarios.
Superior Polyurethane Construction: Unlike factory rubber bushings that tend to degrade with time and exposure to the elements, Powerflex's polyurethane is designed to last. It resists cracking, shrinking, and softening from heat, oil, and road debris, ensuring consistent performance throughout its life. This means less maintenance and fewer replacements over time.
Optimized Suspension Dynamics: These bushings ensure the sway bar stays firmly in place, allowing it to do its job of reducing body roll during sharp turns or fast driving. As a result, the car feels more stable and balanced, providing more confidence when pushing it on twisty roads or track circuits.
Durability and Longevity: Built with motorsport use in mind, the Black Series bushings provide extended durability compared to stock rubber components. They maintain their form and stiffness even under high loads, making them a long-term solution for drivers who need reliability and performance in extreme conditions.
Direct OEM Fit: These bushings are designed to be a direct replacement for the factory units on the 28.2mm front sway bar of the BMW F10/F11 5 Series. Installation is straightforward, making this an easy yet effective upgrade to enhance suspension performance.
If you're looking to elevate the handling of your BMW F10/F11 to track-ready levels, these Powerflex Black Series Front Sway Bar Bushings offer a significant performance boost. By enhancing the stability and responsiveness of your suspension, they make your BMW feel sharper and more controlled, transforming it into a more capable machine in high-demand driving environments.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
2001 - 2006 E46 M3
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This Part Fits the Following BMWs:
1986 - 1994 E32 730i 735i 735iL 740i 740iL 750iL
1989 - 1995 E34 525i, 530i, 535i, 540i, M5, Touring
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3
1996 - 2004 E39 Sedan 525i 528i 530i 540i
1999 - 2001 E46 Convertible 323ci 325ci 330ci
2002-2006 E46 Convertible 325ci 330ci
1998 - 2001 E46 323ci 325ci 330ci M3
2002 - 2006 E46 325ci 330ci
1998 - 2001 E46 Touring 323i 325i
2002 - 2006 E46 Touring 325i 325xi
1998 - 2001 E46 Sedan 320i 323i 325i 328i 330i
2002 - 2006 E46 Sedan 320i 325i 325xi 330i 330xi
The BMW F22, F30, and F32 Front Sway Bar Bushings (25 mm) are designed to optimize the performance of your vehicle’s suspension system by providing a precise fit for the 25 mm front sway bar. These bushings ensure the sway bar operates effectively, reducing body roll and improving handling.
Perfect Fit for 25 mm Sway Bars: Designed specifically for the BMW F22 (2 Series), F30 (3 Series), and F32 (4 Series) models with 25 mm front sway bars, these bushings ensure optimal sway bar performance.
Improved Handling: By limiting unwanted sway bar movement, these bushings provide better stability and sharper cornering, giving you more confidence on the road, especially during aggressive turns.
Durable Material: Available in rubber or polyurethane, with polyurethane bushings offering superior durability and resistance to wear and tear, resulting in more precise handling and a longer lifespan than traditional rubber bushings.
Applications:
For BMW enthusiasts or daily drivers looking to improve their car’s suspension dynamics, the 25 mm Front Sway Bar Bushings are an excellent upgrade, offering improved handling, stability, and durability for the F22, F30, and F32 models.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2009 E91 325xi 328i 328xi
2009 - 2011 E91 328i 328xi
2007 - 2013 E92 328i 328xi 335i 335xi
2007 - 2013 E93 328i 335i
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3
1999 - 2001 E46 Convertible 323ci 325ci 330ci
2002-2006 E46 Convertible 325ci 330ci
1998 - 2001 E46 323ci 325ci 330ci M3
2002 - 2006 E46 325ci 330ci
1998 - 2001 E46 Touring 323i 325i
2002 - 2006 E46 Touring 325i 325xi
1998 - 2001 E46 Sedan 320i 323i 325i 328i 330i
2002 - 2006 E46 Sedan 320i 325i 325xi 330i 330xi
2006 - 2008 E86 Z4 3.0si Z4 M Coupe
2002 - 2008 E85 Z4 Roadster Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster
MINI R55 to R61 Race Polyurethane Rear Trailing Arm Complete Bushing Set is designed to keep the rear suspension properly triangulated, ensuring your vehicle moves as directed. Unlike factory-fresh OEM rubber bushings that allow for deflection and cause suspension geometry changes, these Powerflex polyurethane bushings are firmer, reducing deflection and improving handling over bumps. Proper alignment with these bushings also extends tire wear.
Powerflex, Europe's top-selling suspension bushing manufacturer, uses advanced techniques to produce these premium performance bushings, made to exact-fit standards. Built to last longer than OEM rubber bushings, they enhance performance and provide a more engaging driving experience.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3
The Powerflex Rear Sway Bar Bushing for the BMW F10/F11, designed specifically for a 15mm sway bar, is an excellent performance upgrade that enhances the vehicle's handling and stability. By replacing the factory rubber bushings with high-quality polyurethane, this component delivers several key advantages.
Improved Cornering Stability: The firmer polyurethane construction significantly reduces flex in the sway bar, resulting in minimized body roll during cornering. This enhancement leads to improved traction and a more controlled driving experience, particularly during aggressive maneuvers.
Superior Durability: Engineered to withstand harsh driving conditions, these bushings resist wear and tear from oil, heat, and road debris. Unlike traditional rubber bushings that may degrade over time, Powerflex bushings maintain their performance and integrity longer.
Enhanced Driver Feedback: By limiting unwanted movement in the sway bar assembly, these bushings provide better steering feedback and responsiveness. Drivers will notice an increase in steering precision, resulting in a more engaging and connected driving experience.
Direct Fit for Simple Installation: Tailored specifically for the BMW F10/F11 models with a 15mm rear sway bar, these bushings offer a precise fit and allow for easy installation without the need for modifications or special tools.
This upgrade is ideal for BMW F10/F11 owners looking to elevate their vehicle's handling capabilities and overall driving performance. The Powerflex Rear Sway Bar Bushing is a reliable choice for enhancing the effectiveness of the rear suspension, making it suitable for both everyday driving and spirited performance applications.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. *Door Buster Special - New Product*
The Powerflex Rear Sway Bar Mount Bushing - 23mm (Black Series) for BMW E70/F15 X5 and E71/F16 X6 delivers high-performance suspension upgrades.
Perfect for X5 and X6 drivers seeking top-tier handling and stability on the road or track.
The Powerflex Rear Diff Front Mount Bushing (Race) for BMW E34 5 Series and E32 7 Series is a premium upgrade designed for enhanced drivetrain stability and performance. Here’s another description:
Race-Grade Polyurethane: Part of Powerflex’s Race Series, this bushing is crafted from a super-stiff polyurethane compound, designed to eliminate the excessive movement found in factory rubber bushings. The Race Series is optimized for track and high-performance driving, where minimizing flex is crucial for precision handling.
Purpose: This bushing replaces the front mount of the rear differential, a critical point where unwanted flex can reduce performance. By stiffening this mount, the bushing ensures improved power transfer to the wheels and reduces drivetrain slop, making the car feel more connected and responsive.
Key Features:
Benefits:
Fitment: Tailored specifically for the BMW E34 (5 Series) and E32 (7 Series) models, this bushing replaces the front differential mount and offers a perfect fit, ensuring no compromises on installation or function.
In summary, the Powerflex Rear Diff Front Mount Bushing (Race Series) is an essential upgrade for BMW E34 and E32 owners looking for improved drivetrain rigidity, better handling, and longer-lasting components. Perfect for performance enthusiasts and track-goers, it enhances rear suspension control and reduces drivetrain movement for sharper, more precise driving experiences.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex Front Control Arm Rear Bushing (Caster Offset) for the BMW F48, F49 X1, and F39 X2 is a premium suspension upgrade designed to improve handling, steering feel, and suspension durability. These bushings replace the factory-installed rubber bushings, which are prone to wear and deflection over time, with high-quality polyurethane bushings that deliver enhanced performance and longevity.
Caster Offset Design:
Superior Material – Polyurethane:
Applications:
Improved Caster Angle:
Performance and Practicality:
Professional Installation Recommended:
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
1982 - 1991 E30 318i 318is 325 325e 325es 325i 325is 325iC 325ix
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2009 E91 325xi 328i 328xi
2009 - 2011 E91 328i 328xi
2007 - 2013 E92 328i 328xi 335i 335xi
2007 - 2013 E93 328i 335i
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex Rear Sway Bar Bushing for the BMW F10/F11, specifically designed for a 14mm sway bar, is a performance upgrade that significantly enhances the vehicle's handling and stability. By replacing the factory rubber bushings with high-quality polyurethane, this component provides several key benefits for driving enthusiasts.
Enhanced Cornering Performance: The firmer polyurethane construction reduces the amount of flex in the sway bar, leading to improved stability during cornering. This reduction in body roll enhances traction and allows for more aggressive driving without compromising control.
Superior Durability: These bushings are built to withstand harsh conditions, including exposure to oil, heat, and road debris. Unlike traditional rubber bushings that can degrade over time, Powerflex bushings maintain their integrity and performance for longer periods.
Improved Steering Precision: By minimizing unwanted movement in the sway bar assembly, these bushings enhance steering feedback and responsiveness, resulting in a more connected driving experience. Drivers will notice a difference in handling and control, especially during spirited driving.
Direct Fit for Easy Installation: Tailored specifically for the BMW F10/F11 models with a 14mm rear sway bar, these bushings ensure a straightforward installation process. They fit directly into the existing mounts without requiring modifications.
This upgrade is ideal for BMW F10/F11 owners looking to improve their vehicle's handling capabilities and overall driving experience. The Powerflex Rear Sway Bar Bushing provides a robust solution for enhancing the performance of the rear suspension, making it suitable for both everyday driving and high-performance scenarios.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
2001 - 2006 E46 M3
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
The Powerflex Black Series Front Sway Bar Bushing (22 mm) for the BMW E21 is a high-performance suspension upgrade designed for enthusiasts seeking maximum handling precision and durability. Made from Powerflex’s toughest polyurethane compound, these bushings are ideal for motorsport and track use, providing significantly reduced deflection compared to stock rubber bushings.
Whether you're pushing your BMW E21 on the track or just looking to sharpen its handling for spirited driving, these Powerflex Black Series bushings offer the performance, durability, and precision needed to get the most out of your suspension setup.