BMW Suspension Parts

Rear Shock Mounts (RSM) HP Aluminum/Rubber - E30, E36, E46, Z3, Z4 (P...

T#:3666

Part#: JTD909

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Macht Schnell EDC Emulation Module

T#:5351

Part#: TMS5351

Ships on Oct 30, 2026

$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:

The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required

Compatible with iDrive and non-iDrive systems

Easy 15-minute installation process with no wire cutting

Proper emulation of the EDC monitoring system

No dealer visits or coding required after installation

Completely removable at any time

Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
Will not work on vehicles equiped with BMW's Dynamic Drive system.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2013 E92 BMW M3 Coupe
2008-2013 E93 BMW M3 Convertible
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
2008+ E71 BMW X6 xDrive35i X6 xDrive50i

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Blue - G20 M340i 330i,...

T#:637422

Part#: BMSG20BSCB-BLUE

Ships on Oct 27, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - G20 M340i 330i, ...

T#:637421

Part#: BMSG20BSCB-RED

Ships on Oct 27, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...

T#:4648679

Part#: 69.10.100

Ships in 9 Business Days

$ 289.00 USD

Add to Wish List

Qty

$ 289.00 USD

Add to Wish List

Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Blue - BMW G01 X3, G02 X4, F...

T#:39126850

Part#: BMSBILSCB-BLU

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Black - G20 M340i 330i...

T#:637424

Part#: BMSG20BSCB-BLK

Ships in 7 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Lesjofors Rear Coil Spring - E46 Standard Suspension

T#:641814

Part#: 4208431

Ships in 1 Business Day

$ 89.64 USD

Add to Wish List

Qty

$ 89.64 USD

Add to Wish List

Replace old or cracked coil springs with this OE direct replacement.

Lesjofors Front Coil Spring - E36, Z3

T#:641821

Part#: 38006013316

Ships in 1 Business Day

$ 103.73 USD

Add to Wish List

Qty

$ 103.73 USD

Add to Wish List

Replace old or cracked coil springs with this OE direct replacement.

Lesjofors Front Coil Spring - E46 E39 Standard Suspension

T#:641816

Part#: 4008469

Ships in 1 Business Day

$ 104.99

This product was last offered at the strikethrough price on
05-07-2026

$ 101.99 USD

Add to Wish List

Qty

$ 101.99 USD

Add to Wish List

Replace old or cracked coil springs with this OE direct replacement.

Lesjofors Rear Spring - E83 X3

T#:591421

Part#: 4208450

Ships in 1 day

$ 74.73 USD

Add to Wish List

Qty

$ 74.73 USD

Add to Wish List

This is the standard ride height factory rear spring. They are sold individually. The factory springs have a tendency to break over time. These springs will restore your ride back to the stock ride height.

Show More Show Less

Front Coil Spring - Priced Each

T#:19395570

Part#: 31336769915

Ships in 1 day

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

Lesjofors Coil Spring - Rear - E24, E28

T#:372552

Part#: 33531125326

Back Ordered

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Improve ride quality and safety

Burger Motorsports Billet Strut Cross Braces - Silver - G20 M340i 330...

T#:637423

Part#: BMSG20BSCB-SIL

Ships on Oct 27, 2026

$ 255.99 USD

Add to Wish List

Qty

$ 255.99 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Black - BMW G01 X3, G02 X4, ...

T#:39126853

Part#: BMSBILSCB-BLK

Ships on Oct 27, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - BMW G22/G23/G26 ...

T#:46924996

Part#: G22BSCB-RED

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Billet Strut Cross Braces For G30 G14 G15 G16

T#:27138580

Part#: BMSG30SB

Ships on Oct 27, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the G30, G14, G15, and G16 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

Macht Schnell Aluminum Differential Bushing Kit - E9X M3

T#:4648688

Part#: 69.10.110

Ships in 8 Business Days

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Macht Schnell's Aluminum Differential Bushing Kit is designed to give your differential carrier more rigidity.

Replacement Bushings for Rear Shock Tower Mounts

T#:1386

Part#: JTD909-75-KIT

Ships in 4 Business Days

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Blue - BMW G22/G23/G26...

T#:46924998

Part#: G22BSCB-BLU

Ships on Oct 27, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Black - BMW G22/G23/G2...

T#:46924999

Part#: G22BSCB-BLK

Ships on Oct 27, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Front Spring - Priced Each 4058703

T#:641658

Part#: 31336759389

Ships in 1 Business Day

$ 101.28 USD

Add to Wish List

Qty

$ 101.28 USD

Add to Wish List

Burger Motorsports Billet Strut Cross Braces - Silver - BMW G22/G23/G...

T#:46924997

Part#: G22BSCB-SIL

Ships on Oct 27, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Red - BMW G01 X3, G02 X4, F9...

T#:39126852

Part#: BMSBILSCB-RED

Ships on Oct 27, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Lesjofors Rear Coil Spring - E60 Standard Suspension

T#:641810

Part#: 4208448

Ships in 1 Business Day

$ 102.34 USD

Add to Wish List

Qty

$ 102.34 USD

Add to Wish List

Replace old or cracked coil springs with this OE direct replacement.

Rear Spring - BMW X3 XDrive (F25/F26)

T#:36947230

Part#: 33536787202

Ships in 1 Business Day

$ 104.99

This product was last offered at the strikethrough price on
05-07-2026

$ 101.99 USD

Add to Wish List

Qty

$ 101.99 USD

Add to Wish List

Replacement OE style coil spring for the rear suspension.

Lesjofors Front Coil Spring - E46

T#:641823

Part#: 38006006316

Ships in 1 Business Day

$ 101.33 USD

Add to Wish List

Qty

$ 101.33 USD

Add to Wish List

Replace old or cracked coil springs with this OE direct replacement.

BMS Billet Strut Cross Braces - Anodized Silver - BMW G01 X3, G02 X4,...

T#:39126854

Part#: BMSBILSCB-SIL

Ships on Oct 27, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Lesjofors Front Coil Spring - E46

T#:1196158

Part#: 31331096038

Ships in 1 Business Day

$ 97.99

This product was last offered at the strikethrough price on
05-07-2026

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

Replace your cracked springs

Lesjofors Rear Coil Spring - E46 Standard Suspension

T#:641812

Part#: 4208434

Ships in 1 Business Day

$ 105.94 USD

Add to Wish List

Qty

$ 105.94 USD

Add to Wish List

Replace old or cracked coil springs with this OE direct replacement.

Rear Coil Spring

T#:31622543

Part#: 4208463

Ships in 1 Business Day

$ 125.17 USD

Add to Wish List

Qty

$ 125.17 USD

Add to Wish List

BMS Billet Strut Cross Braces - G29 BMW Z4

T#:27138575

Part#: BMSZ4SB

Ships on Oct 27, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the 2019+ G29 BMW Z4 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. The perfect addition to your G29 BMW Z4 engine bay Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less