Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:
Rear Shock Mounts (RSM) HP Aluminum/Rubber - E30, E36, E46, Z3, Z4 (Pair)
Rear Shock Mounts (RSM) HP Aluminum/Rubber - E30, E36, E46, Z3, Z4 (P...
JT Design - Corporate Logo
T#:3666
Part#: JTD909
Back Ordered
$ 99.99 USD
Free Shipping
Add to Wish List
$ 99.99 USD
Free Shipping
Add to Wish List
Made in the USA These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less
Macht Schnell EDC Emulation Module
Macht Schnell EDC Emulation Module
Macht Schnell - Corporate Logo
T#:5351
Part#: TMS5351
Ships on Aug 7, 2026
$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD
Free Shipping
Add to Wish List
$ 249.00 USD
Free Shipping
Add to Wish List
For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:
  • The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required
  • Compatible with iDrive and non-iDrive systems
  • Easy 15-minute installation process with no wire cutting
  • Proper emulation of the EDC monitoring system
  • No dealer visits or coding required after installation
  • Completely removable at any time

    Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
    Will not work on vehicles equiped with BMW's Dynamic Drive system.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 Sedan
    2008-2013 E92 BMW M3 Coupe
    2008-2013 E93 BMW M3 Convertible
    2006-2010 E60 BMW M5
    2006-2011 E63 BMW M6
    2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i
    • Show More Show Less
    Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M
    Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...
    Macht Schnell - Corporate Logo
    T#:4648679
    Part#: 69.10.100
    Ships in 9 Business Days
    $ 289.00 USD
    Free Shipping
    Add to Wish List
    $ 289.00 USD
    Free Shipping
    Add to Wish List
    Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.
    Show More Show Less
    Macht Schnell Aluminum Differential Bushing Kit - E9X M3
    Macht Schnell Aluminum Differential Bushing Kit - E9X M3
    Macht Schnell - Corporate Logo
    T#:4648688
    Part#: 69.10.110
    Ships in 9 Business Days
    $ 299.00 USD
    Free Shipping on orders $49 and up
    Add to Wish List
    $ 299.00 USD
    Free Shipping on orders $49 and up
    Add to Wish List
    Macht Schnell's Aluminum Differential Bushing Kit is designed to give your differential carrier more rigidity.
    Replacement Bushings for Rear Shock Tower Mounts
    Replacement Bushings for Rear Shock Tower Mounts
    JT Design - Corporate Logo
    T#:1386
    Part#: JTD909-75-KIT
    Ships on Aug 5, 2026
    $ 32.00 USD
    Free Shipping on orders $49 and up
    Add to Wish List
    $ 32.00 USD
    Free Shipping on orders $49 and up
    Add to Wish List
    The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).
    Show More Show Less

    Select Vehicle

    BMW Mini
    Clear Vehicle

    Category

    Brand

    Price

    $
    $

    Shipping