Find Parts That Fit Your Vehicle

Kits

BMW fuel system kits provide a comprehensive solution for maintaining and upgrading the fuel delivery system, ensuring optimal engine performance and efficiency. Over time, fuel pumps, injectors, filters, and pressure regulators can wear out, leading to poor fuel economy, hard starts, misfires, and engine hesitation. Common problems include clogged fuel injectors, failing fuel pumps, and fuel pressure inconsistencies, which can result in rough idling and reduced power. Upgrading or replacing worn components with a complete BMW fuel system kit restores proper fuel flow, enhances throttle response, and improves overall drivability. Our selection of OEM and high-performance BMW fuel system kits includes everything needed for a reliable fuel system refresh, ensuring a precise fit and long-lasting durability for a wide range of BMW models.

Sort By:

High Pressure Fuel Pump Replacement Kit - N55 E Chassis

T#:15644274

Part#: 13517616170KT

In Stock

$ 1,783.31

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.13 USD

Add to Wish List

Qty

$ 1,743.13 USD

Add to Wish List

This extensive kit includes a HPFP and associated gaskets to get the job done right!

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

Radium Fuel Hanger Surge Tank Complete Kit - For Walbro Pumps ...

Upgrade Your Low-Pressure Fueling System With this All-Inclusive Kit!

T#:25606665

Part#: N5XFUEL

Ships on Aug 7, 2026

Sale - Save 3% $ 1,254.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,213.80 USD

Add to Wish List

Sale - Save 3%

$ 1,254.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,213.80 USD

Add to Wish List

Introducing the comprehensive N54/N55 Low-Pressure Fueling Solution! With Radium Engineering's Regulated Fuel Hanger Surge Tank at its core, this kit allows you to tailor your fuel pump setup, select an in-line fuel filter, and opt for a wiring kit for multiple LPFP configurations in your N54 or N55-powered E9X 335i. In this setup, the BMW fuel pump serves as a "lift" pump, maintaining fuel volume in the Fuel Hanger Surge Tank via a dedicated orifice. This guarantees sufficient pressure for the venturi jet pump(s) to operate, ensuring consistent fuel delivery. Excess fuel in the FHST cycles back to the OEM tank through a one-way check valve ensuring a steady fuel supply. Unlike conventional surge tanks, which rely on pump flow matching, this FHST employs additional mechanisms to continuously deliver fuel regardless of fluctuations in other fuel sources. When the main tank nears depletion, the lift pump and Fuel Pressure Regulator step in to supply fuel to the FHST. Furthermore, with a boost reference signal (Hobbs Switch), the Fuel Pressure Regulator operates at a 1:1 ratio, allowing fuel pressure to rise proportionally with boost pressure. The low-pressure fuel returning from the Fuel Pressure Regulator is routed back into the surge tank to maintain its fullness. Inside the canister, a 6-hole diverter ensures even fuel dispersion without air bubbles or foaming. The stainless electrical studs included effectively handle high current demands, surpassing the capabilities of compact bulkhead connectors. These resilient connections are sealed against all standard and exotic fuels, with non-conductive acorn nuts provided to prevent accidental short circuits. The kit also includes the necessary electrical hardware for one Walbro fuel pump and the OEM level sender, while the in-tank wiring is insulated with premium chemically resistant ETFE for enhanced durability. If you are planning on running more than one LPFP, you will need to select the Hobbs Switch option for boost reference (to be installed on the manifold or charge pipe), as well as the fuel pump wiring kit! Features: -Drop-In OEM Replacement -Permits 1 or 2 Surge Pumps -1:1 Fuel Pressure Adjustments -Fuel Starvation Protection -Integrated 1-Way Fill Valve -High Current Electrical Hardware -Compatible with Various Pumps -Anodized Aluminum Construction -Gasoline and Ethanol Compliant -Anodized Aluminum 8AN Male Outlet Fitting -Anodized Aluminum Surge Tank Canister -Fuel Resistant Tubing and Wiring -Stainless Steel Hardware -Relay(s) and Fuse(s)

Show More Show Less

Fuel Pump High Pressure Kit, with Fuel Line Tool - R55 - R59 ...

T#:41661208

Part#: 13517588879T1KT

In Stock

$ 943.59

This product was last offered at the strikethrough price on
06-03-2026

$ 844.59 USD

Add to Wish List

Qty

$ 844.59 USD

Add to Wish List

This complete fuel pump replacement kit is a must-have for any owner or technician looking to maintain peak performance and dependability in their BMW or MINI’s direct injection system.

Project Cars

SELECT YOUR BMW

Kits

High Pressure Fuel Pump Replacement Kit - N55 E Chassis

JB4PRO Flex Fuel Add On Harness - B58/S58

Radium Fuel Hanger Surge Tank Complete Kit - For Walbro Pumps ...

Fuel Pump High Pressure Kit, with Fuel Line Tool - R55 - R59 ...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results