BMW Brakes & Brake Parts

ISWEEP BMW Rear Brake Pads - IS1500 Street Compound

T#:14618138

Part#: 1747.IS1500

Ships in 5 Business Days

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad. iSWEEP is a Japanese brake and suspension company. All products are developed and manufactured in Japan. IS1500 - for STREET USER - Low Dust, Same Bite A brake pad that produces less dust compared to factory OEM. Users who are unsatisfied with OEM brake dust. Far less brake dust compared to stock factory OEM brake pads. Far less brake squeal compared to stock factory pads. Roughly 10-20% more effective under normal city driving conditions. Improved initial bite and braking control compared to factory OEM pads. Tested in extreme winter conditions with effective, stable results. Pad set does not include a Wear sensor (sold separately)

Show More Show Less

ISWEEP BMW Front Brake Pads - IS1500 Street Compound

T#:15015294

Part#: RR1535.IS1500

Ships in 6 Business Days

$ 450.00 USD

Add to Wish List

Qty

$ 450.00 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad. iSWEEP is a Japanese brake and suspension company. All products are developed and manufactured in Japan. IS1500 - for STREET USER - Low Dust, Same Bite A brake pad that produces less dust compared to factory OEM. Users who are unsatisfied with OEM brake dust. Far less brake dust compared to stock factory OEM brake pads. Far less brake squeal compared to stock factory pads. Roughly 10-20% more effective under normal city driving conditions. Improved initial bite and braking control compared to factory OEM pads. Tested in extreme winter conditions with effective, stable results. Pad set does not include a Wear sensor (sold separately)

Show More Show Less

ISWEEP Front Brake Pads - IS1500 Street Compound - BMW G80 G82/83 G87...

T#:52340626

Part#: RC1726.IS1500

Ships in 5 Business Days

$ 625.00 USD

Add to Wish List

Qty

$ 625.00 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad.

Show More Show Less

BMW F9X Rear Brake Pads - IS1500 Street Compound

T#:14618127

Part#: R1644.IS1500

In Stock

$ 335.99 USD

Add to Wish List

Qty

$ 335.99 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad. iSWEEP is a Japanese brake and suspension company. All products are developed and manufactured in Japan. for STREET USER - Low Dust, Same Bite A brake pad that produces less dust compared to factory OEM. - Users who are unsatisfied with OEM brake dust. - Far less brake dust compared to stock factory OEM brake pads. - Far less brake squeal compared to stock factory pads. - Roughly 10-20% more effective under normal city driving conditions. - Improved initial bite and braking control compared to factory OEM pads. - Tested in extreme winter conditions with effective, stable results.

Show More Show Less

ISWEEP Rear Brake Pads - IS2000 Street/Sports Compound

T#:14618139

Part#: 1747.IS2000

In Stock

$ 352.99 USD

Add to Wish List

Qty

$ 352.99 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad. iSWEEP is a Japanese brake and suspension company. All products are developed and manufactured in Japan. for STREET / SPORTS USER - Less Dust, More Bite Raises the level of performance compared to factory OEM. - Far more effective performance compared to stock OEM brake pads. - Versatile brake pad for aggressive street and winding roads. - Quick reaction to brake pedal input and excellent control of applied force. - Controlled linear characteristics and stable operation with no sudden or abrupt bite.

Show More Show Less

ISWEEP Front Brake Pads - IS2000 Street / Sport Compound - BMW G80 G8...

T#:41728756

Part#: RC1726.IS2000

In Stock

$ 700.00 USD

Add to Wish List

Qty

$ 700.00 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad.

Show More Show Less

ISWEEP Front Brake Pads - IS1500 Street Compound - G90 G99 M5, F90 M5...

T#:48160242

Part#: RC1697.1500

In Stock

$ 600.00 USD

Add to Wish List

Qty

$ 600.00 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad.

Show More Show Less

ISWEEP Rear Brake Pads - IS2000 Street/Sports Compound

T#:14618128

Part#: R1644.IS2000

Ships in 7 Business Days

$ 383.99 USD

Add to Wish List

Qty

$ 383.99 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad. iSWEEP is a Japanese brake and suspension company. All products are developed and manufactured in Japan. for STREET / SPORTS USER - Less Dust, More Bite Raises the level of performance compared to factory OEM. - Far more effective performance compared to stock OEM brake pads. - Versatile brake pad for aggressive street and winding roads. - Quick reaction to brake pedal input and excellent control of applied force. - Controlled linear characteristics and stable operation with no sudden or abrupt bite.

Show More Show Less

ISWEEP - IS2000 (Street/Sport) FRONT Brake Pads - G30, G20, F97, G05 ...

T#:17140154

Part#: RR1535.IS2000

In Stock

$ 512.99 USD

Add to Wish List

Qty

$ 512.99 USD

Add to Wish List

BMW G30 ISWEEP Front Brake Pads - IS2000 Street/Sports Compound are engineered to deliver exceptional braking performance, offering a perfect balance between everyday usability and sporty driving demands. Turner Motorsport presents these premium brake pads to enhance your BMW’s braking system with advanced technology and rigorous testing.

Enhanced Performance: Delivers far superior performance compared to factory OEM brake pads.
Versatile Application: Ideal for aggressive street driving and winding roads, providing consistent and reliable braking.
Responsive Control: Quick response to brake pedal input with excellent control of applied force.
Smooth Operation: Offers controlled linear characteristics with stable operation, avoiding sudden or abrupt bites.
Reduced Dust: Less brake dust compared to traditional pads, keeping your wheels cleaner.

Show More Show Less

3/16" X 25ft Ultrabend Brake Line

T#:641940

Part#: BREZ100

Ships in 1 Business Day

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

Replace your steel brake line with easy to bend brake line

HARD Motorsport Brake Duct Inlets and Fog Light Delete -- E46 M3 ...

T#:390238

Part#: DUCTINLETS.E46

Ships in 10 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

These ABS plastic ducts are lightweight and durable and made to fit the E46 M3 front bumper. The rear has a port that allows you to run 3 inch hose to your brakes for extreme cooling needs.

Sold as a pair. Mounting rivets included.

Fits vehicles with the E46 M-Tech front bumper.

Show More Show Less

Front Street Performance Brake Pad Set - JCW

T#:584296

Part#: IS1500-R1312-15

Ships in 2 Business Days

$ 177.99 USD

Add to Wish List

Qty

$ 177.99 USD

Add to Wish List

Front Street/Sport Brake Pad Set - JCW

T#:584298

Part#: IS2000-R1312-15

Ships in 1 Business Day

$ 226.99 USD

Add to Wish List

Qty

$ 226.99 USD

Add to Wish List

HARD Motorsport Brake Cooling Low-Profile Duct Kit - E46 M3

T#:599638

Part#: E46BRKDUCTONLY-X

Ships in 10 Business Days

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Overheating your brakes can end an entire weekend at the track and is the most common reason for premature brake failure and wear. Hi-Flow Molded, Low-Profile ABS Cooling Ductwork: The HARD Motorsport Brake Cooling DUCT kit is designed for maximum efficiency specifically for the BMW E46. The Low Profile design allows for more clearance for greater turning radius. An aluminum plate on the exterior side adds even more protection against wear from tire contact. No more destroying expensive flex hose. Race-inspired by modern duct design of top motorsport teams and manufacturers. Easy Mounting: Ducts include a sturdy aluminum mounting bracket that utilizes existing hardware. No drilling needed. Track and Daily Driver Compatible : HARD's low-profile ducts were CAD designed from laser scans of the E46 chassis to be compatible with OEM A/C Equipment. The forward splash guard will need to be modified or removed (as pictured) to allow for installation of the duct kit.

Show More Show Less

HARD Motorsport Brake Cooling Ducts Kit - No Backing Plates - BMW E36...

T#:589050

Part#: E36BRKDUCT

Ships in 10 Business Days

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Overheating your brakes can end an entire weekend at the track and is the most common reason for premature brake failure and wear. Hi-Flow Molded ABS Cooling Ductwork: The HARD Motorsport Brake Cooling DUCT kit is designed for maximum efficiency specifically for the BMW E36. Race-inspired by modern duct design of top motorsport teams and manufacturers. Easy Mounting / Removable Front Bumper: Because the ducts are supported by the frame rail, you can remove your entire front bumper without the need of disconnecting ANY part of your brake cooling system. No need to fumble with bolts, screws, and duct clamps, or unintentionally ripping out your flex tubing in the process. No need for extra inlets: The kit provides all that you need for mounting brake cooling ducts directly to factory mounting points on the frame rail of your BMW E36 M3. These ducts draw cold air directly from the design of the bumper. Our quality ABS plastic molded ducts are designed to endure the rigors of racing. Durable and easy to manage. No need for all that flex hose: While our kit reduces the area of interference, space is limited, so contact may still occur at full lock.** However, our kit uses a fraction of the length of flex tube over any other kit, so replacing this short hose is much easier on a budget and is a time saver in the paddock. Features: Left and Right contour-molded ABS chamber ducts/inlets Left and Right HARD aluminum mounting brackets/abrasion plate

Show More Show Less

E90/E92 M3 GT4 Brake Ducts (Genuine BMW Motorsport)

T#:2109

Part#: 51748321767-768

Ships in 7 Business Days

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

Very rare item, direct from BMW MOTORSPORT GMBH! These hand-made prototype style brake ducts are the same used on all of the M3 GT4. Each has 2.7" inch / 68mm outside diameter outlets, which can be connected to corresponding duct hose (not included). This item includes one left brake duct, and one right brake duct, as pictured.

This can be used on any 2008+ E9x M3, including E90 M3 sedan, E92 M3 coupe and E93 M3 convertible.

Show More Show Less

ISWEEP Front Brake Pads - IS1500 Street Compound

T#:33013820

Part#: R1603.IS1500

Ships in 7 Business Days

$ 440.00 USD

Add to Wish List

Qty

$ 440.00 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad. iSWEEP is a Japanese brake and suspension company. All products are developed and manufactured in Japan. IS1500 - for STREET USER - Low Dust, Same Bite A brake pad that produces less dust compared to factory OEM. Users who are unsatisfied with OEM brake dust. Far less brake dust compared to stock factory OEM brake pads. Far less brake squeal compared to stock factory pads. Roughly 10-20% more effective under normal city driving conditions. Improved initial bite and braking control compared to factory OEM pads. Tested in extreme winter conditions with effective, stable results. Pad set does not include a Wear sensor (sold separately)

Show More Show Less

HARD Motorsport M3 Cooling Backing Plates -- BMW E36

T#:390249

Part#: BACKPLTE.E36.OE

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The Brake Cooling Backing Plates from HARD Motorsport features a design that creates a pocket that forces cool air directly into the rotor from the hat so that built up up doesn't have time to lead to premature brake failure and wear. For any sporty or track driven vehicle, this is an absolute must have! It is made from lightweight solid aluminum and is power-coated for extra protection and appearance. They are installed into OEM mounting locations using stock hardware.

For use with the HARD Motorsport Complete Brake Cooling Duct Kit

Fits the following vehicles:

E36 BMW M3 and all submodels with an OEM M3 rotor conversion

Show More Show Less

Front Circuit/Race Brake Pad Set - JCW

T#:584252

Part#: IS3500-R1312-15

In Stock

$ 302.99

This product was last offered at the strikethrough price on
05-03-2026

$ 284.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 302.99

This product was last offered at the strikethrough price on
05-03-2026

$ 284.99 USD

Limited Qty Sale

Add to Wish List

Front Race Brake Pad Set - JCW

T#:584291

Part#: IS4000-R1312-15

Ships in 2 Business Days

$ 371.99 USD

Add to Wish List

Qty

$ 371.99 USD

Add to Wish List

Front Sport/Circuit Brake Pad Set - JCW

T#:584294

Part#: IS3000-R1312-15

Ships in 2 Business Days

$ 276.99 USD

Add to Wish List

Qty

$ 276.99 USD

Add to Wish List

Front Endurance Brake Pad Set - JCW

T#:584290

Part#: ISENDUR-R1312-15

Ships in 2 Business Days

$ 520.99 USD

Add to Wish List

Qty

$ 520.99 USD

Add to Wish List

ISWEEP Front Brake Pads - IS2000 Street/Sport Compound - G90 G99 M5, ...

T#:48160243

Part#: RC1697.2000

Ships in 3 Business Days

$ 680.00 USD

Add to Wish List

Qty

$ 680.00 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad.

Show More Show Less

ISWEEP Rear Brake Pads - IS3500 Track Compound

T#:14618137

Part#: 1747.IS3500

Ships in 7 Business Days

$ 450.00 USD

Add to Wish List

Qty

$ 450.00 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad. iSWEEP is a Japanese brake and suspension company. All products are developed and manufactured in Japan. for CIRCUIT / RACE USER Intended strictly for severe short and full racing courses. - Short circuit and full circuit use. - For racing using “S” tires. - Consistent and stable character during extended racing periods. - Proven stable performance at extremely high temperatures.

Show More Show Less

Rear Brake Pads - G05 X5 | G06 X6 | G07 X7 (WITH 2NH/ 3AC/ 3M2/ 3M3 B...

T#:28038204

Part#: ISWEEP.1747

Ships in 7 Business Days

$ 250.00 USD

Add to Wish List

Qty

$ 250.00 USD

Add to Wish List

ISWEEP Rear Brake Pads - G90/ G99 M5

T#:53856301

Part#: ISWEEP.R1777

Ships in 7 Business Days

$ 331.99 USD

Add to Wish List

Qty

$ 331.99 USD

Add to Wish List

ISWEEP Rear Brake Pads - IS3500 Track Compound

T#:14618129

Part#: R1644.IS3500

Ships in 7 Business Days

$ 495.00 USD

Add to Wish List

Qty

$ 495.00 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad. iSWEEP is a Japanese brake and suspension company. All products are developed and manufactured in Japan. for CIRCUIT / RACE USER Intended strictly for severe short and full racing courses. - Short circuit and full circuit use. - For racing using “S” tires. - Consistent and stable character during extended racing periods. - Proven stable performance at extremely high temperatures.

Show More Show Less

ISWEEP Front Brake Pads - IS3500 Track Compound - BMW G80 G82/83 G87 ...

T#:52340627

Part#: RC1726.IS3500

Ships in 7 Business Days

$ 862.99 USD

Add to Wish List

Qty

$ 862.99 USD

Add to Wish List

The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad.

Show More Show Less