Find Parts That Fit Your Vehicle

BMW Intake Boots & Hoses

The intake boot provides a pathway for air from the air flow sensor to the intake manifold. On most BMWs the boot is made of rubber with an accordian shape that allows the engine to shift and vibrate. As with any rubber component the rubber can dry out and crack and that can lead to serious running and drivability issues. A crack in the boot means that air is entering the engine that is not being monitored by the airflow sensor. The engine computer relies on data from the airflow sensor to set the fuel mixture in the engine. Excess unmetered air can result in lean condition faults, rough running, misfires, and other performance issues. For misfire and lean condition faults, check your intake boots first.

As an alternative to the original rubber, we also offer silicone boots that are both stronger and last longer with a 4-layer silicone design. Samco silicone boots can also decrease your BMW's intake turbulence and restriction by replacing the accordian design with a smoothed internal surface. Samco boots are also perfect as part of a kit to eliminate the factory traction control system (sometimes called an ASC delete boot).
Sort By:
Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G42, Toyota A90 Supra B58 3.0L
Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G42, To...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:8076779
Part#: D760-0062
In Stock
Sale - Save 10% $ 188.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.06 USD
Free Shipping
Add to Wish List
Sale - Save 10%
$ 188.95

This product was last offered at the strikethrough price on
09-29-2026

$ 170.06 USD
Free Shipping
Add to Wish List
Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 14% increase in overall volume over OEM inlet. Average of 7.7% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Show More Show Less
Dinan Intake Resonator Delete Pipe - B46 2.0L
Dinan Intake Resonator Delete Pipe - B46 2.0L
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:22921260
Part#: D760-0064
In Stock
Sale - Save 10% $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 134.95 USD
Free Shipping
Add to Wish List
Sale - Save 10%
$ 149.99

This product was last offered at the strikethrough price on
09-29-2026

$ 134.95 USD
Free Shipping
Add to Wish List
Enjoy the raw, unfettered sounds of the intake/turbo with the Dinan Intake Resonator Delete Pipe! The direct replacement upgrade eliminates the sound deadening element of the factory pipe resulting in the natural voice of the intake/turbo to be noticeably restored. While impressive on its own, coupled with a Dinan intake the full uninhibited chorus of the entire system is put on full display for everyone's enjoyment. Beyond sound suppression, the OEM intake resonator also hinders flow with its disruptive multi-directional flow path. This obstructive factory component is instead replaced by larger diameter, durable, and lightweight smooth-bore aluminum piping that not only improves flow but minimizes pressure drop for improved turbo efficiency. The black powder-coated piping incorporates TIG welded fittings that guarantee seamless fitment with the factory connections in and a nearly concealed aesthetic within the engine bay. Whether or not you are running completely stock or with a variety of 3rd party modifications the Dinan assembly will fit right in. Short of the tempered, outlined, DINAN logo peeking out from just underneath the cowling you will be hard pressed to even realize it's there - that is, until you hear it. Features: Eliminates factory intake resonator to restore natural unfiltered intake/turbo sounds Larger diameter smooth-bore aluminum piping (Dinan: 76mm; OEM: 70mm) for improved airflow and minimization of pressure-drop Upgraded durability and visual appeal via billet aluminum construction w/ TIG welding Direct replacement of OEM pipe Bolt-On Installation Perfect complementary piece to a Dinan intake for maximum sound and flow
Show More Show Less
Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW F22/23 F30/32/33/36 B58 3.0L
Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW F22/23 F30/32/33/36 B...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:8076778
Part#: D760-0061
In Stock
Sale - Save 10% $ 212.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.66 USD
Free Shipping
Add to Wish List
Sale - Save 10%
$ 212.99

This product was last offered at the strikethrough price on
09-29-2026

$ 191.66 USD
Free Shipping
Add to Wish List
Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. More Flow: Up to 24% greater than stock. 24% increase in overall volume over OEM inlet. Average of 10.8% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Show More Show Less
Karbonius CSL Carbon Snorkel - E46 M3 (S54) - Gloss
Karbonius CSL Carbon Snorkel - E46 M3 (S54) - Gloss
Karbonius Composites - Corporate Logo
T#:29931698
Part#: E46AD04-CF-2
In Stock
$ 884.00 USD
Free Shipping
Add to Wish List
$ 884.00 USD
Free Shipping
Add to Wish List
Snorkel extension the allows ducting from CSL bumper to airbox, requires use of CSL style airbox and mounts like the factory flap unit.
Dinan Intake Resonator Delete Pipe - B48 2.0L
Dinan Intake Resonator Delete Pipe - B48 2.0L
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:22921261
Part#: D760-0067
In Stock
Sale - Save 10% $ 168.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 152.06 USD
Free Shipping
Add to Wish List
Sale - Save 10%
$ 168.99

This product was last offered at the strikethrough price on
09-29-2026

$ 152.06 USD
Free Shipping
Add to Wish List
Enjoy the raw, unfettered sounds of the intake/turbo with the Dinan Intake Resonator Delete Pipe! The direct replacement upgrade eliminates the sound-deadening element of the factory pipe resulting in the natural voice of the intake/turbo to be noticeably restored. Beyond sound suppression, the OEM intake resonator also hinders flow with its disruptive multi-directional flow path. This obstructive factory component is instead replaced by 76mm diameter, durable, and lightweight smooth-bore aluminum piping that improves flow for increased turbo efficiency. The black powder-coated piping incorporates TIG welded fittings that guarantee seamless fitment with the factory connections in and a nearly concealed aesthetic within the engine bay. Whether or not you are running completely stock or with a variety of 3rd party modifications the Dinan assembly will fit right in. Short of the tempered, outlined, DINAN logo peeking out from just underneath the cowling you will be hard-pressed to even realize it's there - that is, until you hear it. Features: Eliminates factory intake resonator to restore natural unfiltered intake/turbo sounds 76mm diameter smooth-bore aluminum piping for improved airflow Upgraded durability and visual appeal via billet aluminum construction w/ TIG welding Direct replacement of OEM pipe Bolt-On Installation
Show More Show Less
Dinan B46 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G29 G42 B46 2.0L
Dinan B46 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G29 G42...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:8076777
Part#: D760-0060
Ships on Oct 21, 2026
Sale - Save 10% $ 212.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.66 USD
Free Shipping
Add to Wish List
Sale - Save 10%
$ 212.99

This product was last offered at the strikethrough price on
09-29-2026

$ 191.66 USD
Free Shipping
Add to Wish List
Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 24% increase in overall volume over OEM inlet. Average of 12.5% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Show More Show Less
Karbonius E46 M3 CSL (S54) Carbon Snorkel - Matte Finish
Karbonius E46 M3 CSL (S54) Carbon Snorkel - Matte Finish
Karbonius Composites - Corporate Logo
T#:35727834
Part#: E46AD04-CFM-2
Ships in 4 Business Days
$ 809.00 USD
Free Shipping
Add to Wish List
$ 809.00 USD
Free Shipping
Add to Wish List

Karbonius E46 M3 CSL (S54) Carbon Snorkel - 2x2 Weave and Matte Finish

Karbonius E46 M3 CSL (S54) Carbon Snorkel - 2x2 Weave and Matte Finish is the ultimate performance and style upgrade for BMW E46 M3 enthusiasts. This high-quality carbon fiber snorkel is designed to replicate the renowned CSL design, enhancing airflow efficiency and engine performance while providing a sleek, race-inspired aesthetic. Made with a premium 2x2 carbon fiber weave and finished with a durable matte coating, it offers the perfect balance of form and function. Available through Turner Motorsport, this component ensures authenticity and precision engineering for the discerning BMW owner.

Key Benefits

  • Precision-crafted for seamless fitment on BMW E46 M3 models
  • Improves airflow for optimized S54 engine performance
  • Constructed with a 2x2 carbon fiber weave for superior strength and lightweight durability
  • Matte finish adds a modern, sporty aesthetic to the engine bay
  • Inspired by the legendary CSL design for an authentic motorsport upgrade
  • Available exclusively from trusted BMW performance specialists, Turner Motorsport

Elevate your E46 M3’s performance and style with the Karbonius E46 M3 CSL (S54) Carbon Snorkel - 2x2 Weave and Matte Finish, a must-have for enthusiasts aiming to achieve the ultimate driving experience.

Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

  • Intake Boots & Hoses

Brand

Price

$
$

Special Offers