Find Parts That Fit Your Vehicle

BMW Performance Intake Kits

Turner Motorsport offers a variety of Performance Intake options for your BMW, including Genuine BMW, aFe Eventuri, Dinan, Gruppe M, Agency Power, and ECS Tuning.
Sort By:

K&N - Corporate Logo
T#:367490
Part#: 57-1000
EO#: D-269-28
In Stock
$ 367.99 USD
Free Shipping
$ 367.99 USD
Free Shipping

This K&N performance cold air intake kit eliminates the restrictive air box in favor of a high flowing intake system that allows for greater power all throughout the power band. Every K&N intake features a premium air filter that is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!

K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

  • Covered by the K&N Million Mile Limited Warranty
  • Washable and reusable
  • Will not void vehicle warranty
  • 50 State Legal
Show More Show Less
K&N - Corporate Logo
T#:367488
Part#: 57-1001
EO#: D-269-31
Ships on Oct 30, 2026
$ 367.99 USD
Free Shipping
$ 367.99 USD
Free Shipping

This K&N performance cold air intake kit eliminates the restrictive air box in favor of a high flowing intake system that allows for greater power all throughout the power band. Every K&N intake features a premium air filter that is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!

K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

  • Covered by the K&N Million Mile Limited Warranty
  • Washable and reusable
  • Will not void vehicle warranty
  • 50 state legal
Show More Show Less
K&N - Corporate Logo
T#:567044
Part#: 57-0070
Ships in 4 Business Days
$ 262.99 USD
Free Shipping
$ 262.99 USD
Free Shipping

This K&N performance cold air intake kit eliminates the restrictive air box in favor of a high flowing intake system that allows for greater power all throughout the power band. Every K&N intake features a premium air filter that is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!

K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

  • Covered by the K&N Million Mile Limited Warranty
  • Washable and reusable
  • Will not void vehicle warranty

Does not meet CARB emissions standards and cannot be sold to residents of California.

Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:6151362
Part#: B58MODINTAKECARB
Ships in 10 Business Days
$ 661.99 USD
Free Shipping
$ 661.99 USD
Free Shipping
VTT is proud to announce another product in their carbon fiber product line. The BMW F-Series B58 Carbon fiber intake system! They COMPLETELY do away with the entire factory intake tract, including the accordion hose, the turbo muffler, and all of the restrictive bends. They then replaced it with a smooth radius 2.5"-4" Silicone intake pipe with wire impregnated to ensure strength and longevity. This is coupled with their billet intake connection for an OEM-like fit, and finish. VTT then created a 100% carbon factory-style intake top and coupled it with their stock-style high-flow cotton pre-oiled filters. These tops are 8 layers of 100% carbon, not a single layer wrapped over plastic and they are 1.3MM thick with the VTT logo vacuum printed onto the tops with a UV resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. Features: 50 States Emissions Legal (Carbon fiber kit only. The Cone filter kit is legal for racing use only in California. Always follow all local emissions rules) Easy to install in 15-30 minutes even for a novice A Beautiful Carbon Fiber finish really adds class to the B58 engine bay Filters can be cleaned forever meaning never buy new filters Completely removes the restrictive stock intake pipe, NOT only the turbo muffler elbow Completely reversible if you ever want to remove
Show More Show Less

G20/G21/G22/G23 VTT BMW Performance Intake System
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:3062311
Part#: VTT-G2X-INT-1
In Stock
$ 388.99

This product was last offered at the strikethrough price on
10-11-2026

$ 347.99 USD
Limited Qty Sale
Free Shipping
$ 388.99

This product was last offered at the strikethrough price on
10-11-2026

$ 347.99 USD
Limited Qty Sale
Free Shipping
Upgrade durability, flow and performance with a performance intake system. VTT is proud to announce its Modular Silicone/Billet intake system for the BMW G2X Platform with the B58TU engine. We invested many hours of testing and fitting this kit to get the best fitment, and highest quality. We are very happy with the results. Full disclosure, the factory intake system as far as the airbox is very good, but the intake tract down to the turbo, is full of twists turns, bellows, etc which can cause flow disruption. It also has a silencer which is a restriction as it bypasses air to quiet the intake sound. By removing all of these, and replacing them with our 3'-3.5' Silicone intake tube either to our 6' cone filter or the stock airbox you are removing all of those, and providing a free-flowing optimized air path from the filter or airbox to the turbo. From our testing we found up to 700WHP, the stock airbox is up to the task if stock appearance and sound is what you wish. Once you go over 700WHP, we suggest stepping up to the 6' cone with a built-in velocity stack.
Show More Show Less
K&N - Corporate Logo
T#:4662382
Part#: 63-1132
Ships in 7 Business Days
$ 380.99 USD
Free Shipping
$ 380.99 USD
Free Shipping
K&N intake kits are guaranteed to increase your vehicle’s horsepower and torque, and K&N performs rigorous in-house testing to ensure that each kit meets high-performance standards. Features: Guaranteed to increase horsepower and torque Estimated 13.53 Hp @6300 RPM Roto-molded HDPE intake tube paired with oversized oiled cotton air filter Engineered to provide high airflow and exceptional filtration Replaces factory air filter and intake tube Filter only requires cleaning every 100,000 miles under normal highway driving conditions Typical installation can be completed in 90 minutes or less with simple hand tools 10-Year/Million Mile Limited Warranty™ Will not void vehicle warranty Not legal for sale or use in California
Show More Show Less

K&N - Corporate Logo
T#:5691211
Part#: 63-1116
Ships in 4 Business Days
$ 380.99 USD
Free Shipping
$ 380.99 USD
Free Shipping
K&N intake kits are guaranteed to increase your vehicle’s horsepower and torque, and K&N performs rigorous in-house testing to ensure that each kit meets high-performance standards. Features: Guaranteed to increase horsepower and torque Estimated 13.43 Hp @6000 RPM Roto-molded HDPE intake tube paired with oversized oiled cotton air filter Engineered to provide high airflow and exceptional filtration Replaces factory air filter and intake tube Filter only requires cleaning every 100,000 miles under normal highway driving conditions Typical installation can be completed in 90 minutes or less with simple hand tools 10-Year/Million Mile Limited Warranty™ Will not void vehicle warranty Not legal for sale or use in California
Show More Show Less
K&N - Corporate Logo
T#:5802203
Part#: 57-0691
Ships in 4 Business Days
$ 272.99 USD
Free Shipping
$ 272.99 USD
Free Shipping
Features: Guaranteed to increase horsepower and torque Roto-molded HDPE intake tube paired with oversized oiled cotton air filter Engineered to provide high airflow and exceptional filtration Replaces factory air filter and intake tube Filter only requires cleaning every 100,000 miles under normal highway driving conditions Typical installation can be completed in 90 minutes or less with simple hand tools 10-Year/Million Mile Limited Warranty™ Will not void vehicle warranty A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes.
Show More Show Less

K&N Performace Typhoon Cold Air Intake System - E46 M3 S54
CARB certified for sale in all 50 states
K&N - Corporate Logo
T#:3973
Part#: 69-2001TWK
EO#: D-269-32
Ships in 4 Business Days
$ 419.99 USD
Free Shipping
$ 419.99 USD
Free Shipping

Built for performance and show, the Typhoon Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA), short ram intakes (SR), or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. Available in an assortment of powder coated colors and polished aluminum, these kits are sure to please in every way. They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100,000 miles).

69-2001TWK Product Specifications

Product Style: 69 Series Typhoon Kits
Estimated Horsepower Gain: 8.9 HP @ 6000 RPM
Color: Black
Replacement Filter: RP-5113
CARB Exempt: No
System Type: Short-ram intake system
Weight: 8.7 lb (3.9 kg)
Product Box Length: 19.3 in (490 mm)
Product Box Width: 14.5 in (368 mm)
Product Box Height: 8.4 in (213 mm)

Clickhere for installation instructions.

Show More Show Less

K&N 57 Series FIPK Performance Intake Kit - E46 M3 S54 3.0L
CARB certified for sale in all 50 states
K&N - Corporate Logo
T#:373964
Part#: 57-1003
EO#: D-269-31
Ships in 9 Business Days
$ 367.99 USD
Free Shipping
$ 367.99 USD
Free Shipping

This K&N performance cold air intake kit eliminates the restrictive air box in favor of a high flowing intake system that allows for greater power all throughout the power band. Every K&N intake features a premium air filter that is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!

K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • Free-flowing high density polyethylene tube
  • Replaces entire factory air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
  • 50 state legal
Show More Show Less
K&N - Corporate Logo
T#:367489
Part#: 57-1002
EO#: D-269-31
Special Order: No Guaranteed ETA
$ 367.99 USD
Free Shipping
$ 367.99 USD
Free Shipping

This K&N performance cold air intake kit eliminates the restrictive air box in favor of a high flowing intake system that allows for greater power all throughout the power band. Every K&N intake features a premium air filter that is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!

K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

  • Covered by the K&N Million Mile Limited Warranty
  • Washable and reusable
  • Will not void vehicle warranty
Show More Show Less
K&N Performance Typhoon Intake Kit - E6X M5 M6 S85 5.0L
This intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
K&N - Corporate Logo
T#:370522
Part#: 69-2003TFK
Back Ordered
$ 629.99 USD
Free Shipping
$ 629.99 USD
Free Shipping

This K&N performance cold air intake kit eliminates the restrictive air box in favor of a high flowing intake system that allows for greater power all throughout the power band. Every K&N intake features a premium air filter that is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!

K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

  • Covered by the K&N Million Mile Limited Warranty
  • Washable and reusable
  • Will not void vehicle warranty

Does not meet CARB emissions standards and cannot be sold to residents of California.

Show More Show Less


Typhoon System Performance Air Intake Kit
CARB certified for sale in all 50 states
K&N - Corporate Logo
T#:26404917
Part#: 69-2005TTK
EO#: D-269-38
In Stock
$ 440.99 USD
Free Shipping on orders $49 and up

Experience enhanced performance and style with the 69 Series Typhoon™ Air Intake System. Crafted from mandrel-bent aluminum tubing, this induction system is designed to fit various sport compact performance vehicles, including the Mini. Choose from cold air intakes (CA), short ram intakes (SR), or complete cold air (CCA) intakes, offering versatility for different driving preferences. Available in polished aluminum, powder-coated red, and powder-coated silver finishes, among others, this intake system not only improves performance but also enhances the visual appeal of your Mini.

  • Free-flowing mandrel-bent aluminum tube design for improved airflow
  • Options for cold air intake or short ram intake configurations
  • High-quality finish options for added customization
  • Dramatically reduces intake restriction for increased power and torque
  • Comes with a Million Mile Limited Warranty for peace of mind
Show More Show Less
K&N - Corporate Logo
T#:389641
Part#: 69-2004TTK
EO#: D-269-53
Ships in 4 Business Days
$ 419.99 USD
$ 419.99 USD

The 69 Series Typhoon™ Air Intake System is engineered for peak performance and style, offering a free-flowing mandrel-bent aluminum tube induction system suitable for various sport compact performance vehicles. Available in three designs - cold air intakes (CA), short ram intakes (SR), or complete cold air (CCA) intakes - it offers versatility to fit different preferences. With options like polished aluminum, powder coated red, and powder coated silver finishes, it adds a touch of customization to your Mini.

  • Replaces restrictive factory air filter and intake housing
  • Reduces intake restriction for increased power and torque
  • Comes with a Million Mile Limited Warranty
  • Guaranteed to boost horsepower
  • Available in different designs and finish options for personalization
Show More Show Less

K&N - Corporate Logo
T#:30960441
Part#: 69-2023TS
EO#: D-269-53
Ships in 4 Business Days
$ 386.99 USD
Free Shipping on orders $49 and up

Vargas Turbo Technologies - Corporate Logo
T#:6151361
Part#: B58MODINTAKECONE
Ships in 10 Business Days
$ 556.99 USD
Free Shipping
$ 556.99 USD
Free Shipping
VTT is proud to announce the BMW F-Series B58 intake system! They COMPLETELY do away with the entire factory intake tract, including the accordion hose, the turbo muffler, and all of the restrictive bends. They then replaced it with a smooth radius 2.5"-4" Silicone intake pipe with wire impregnated to ensure strength and longevity. This is coupled with their billet intake connection for an OEM-like fit, and finish. This hose is paired with VTT's 4" high-flow cotton pre-oiled cone filters. Made from 100% carbon, not a single layer is wrapped over plastic. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. Features: NOTE: The Cone filter intake kit is legal for RACING USE ONLY in California. Always follow all local emissions rules. (See ES4488513 for VTT's 50-State legal intake kit) Easy to install in 15-30 minutes even for a novice Filters can be cleaned forever meaning never buy new filters Completely removes the restrictive stock intake pipe, NOT only the turbo muffler elbow Completely reversible if you ever want to remove
Show More Show Less
VTT Carbon Fiber Intake Kit - G80 G82 G83 - S58
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5802143
Part#: VTT-S58-CARBON-I
Ships in 10 Business Days
$ 881.99 USD
Free Shipping
$ 881.99 USD
Free Shipping
The BMW S58 G8X M3/4 Carbon fiber intakes! BMW did a wonderful job designing these intakes and we have found they are only slightly restrictive at elevated power levels, mostly due to the secondary filter inside, and the factory paper filter. The factory setup is EXTREMELY efficient with only a couple of small changes. With this in mind, VTT decided to just take their cues, and make factory-style carbon fiber intake tops with no secondary filters, and high flow cotton pre-oiled filters. These are 8 layers of 100% carbon not a single layer wrapped over plastic and they are 1.3MM thick with the VTT logo vacuum printed onto the tops, with a UV resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. 50 States Emissions Legal Easy to install 15-30 minutes even for a novice Beautiful Carbon Fiber finish really adds class to the S58 engine bay Filters can be cleaned forever meaning never buy new filters Up to 13WHP gains Completely reversible if you ever want to remove
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:29334009
Part#: VTT-G2X-CF-LID-1
Ships in 10 Business Days
$ 444.99 USD
Free Shipping
$ 444.99 USD
Free Shipping

Enhance your engine bay's aesthetics with the sleek carbon fiber airbox lid from Vargas Turbo Technologies!

VTT rigorously tested the stock air intake on a dynamometer and found limited areas for enhancement. Drawing inspiration from BMW's design, VTT crafted a carbon fiber lid for the factory airbox.

Constructed entirely from 100% carbon fiber, this lid features an eight-layer design with a 1.3mm thick UV-resistant shell, ensuring long-lasting durability.

The included high-performance air filter, made from a high-flow cotton weave, comes pre-oiled to trap contaminants while maintaining optimal airflow.

Key Features:

50-state emissions compliant Simple, straightforward installation Stunning carbon fiber appearance Reusable high-performance air filter Easily reversible upgrade Transform your B58-equipped BMW with the Carbon Fiber Airbox Lid & Filter Kit from Vargas Turbo Technologies today!

Show More Show Less
Intake System
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:2928964
Part#: SUPRA-INT-1
Ships in 10 Business Days
$ 388.99 USD
Free Shipping
$ 388.99 USD
Free Shipping

Vargas Modular Intake System - BMW G2X 3
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51883663
Part#: VTT-G2X-INT4
Ships in 10 Business Days
New Item
$ 669.99 USD
Free Shipping
$ 669.99 USD
Free Shipping
Engineered specifically for the B58TU platform, the VTT Modular Intake System focuses on streamlining the journey from the atmosphere to your turbocharger.

Vargas Modular Intake System - BMW G2X M340i, M440i
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51883661
Part#: VTT-G2X-INT2
Ships in 10 Business Days
New Item
$ 284.99 USD
Free Shipping
$ 284.99 USD
Free Shipping
The VTT Modular Intake System is engineered for the BMW owner who wants to maximize performance without sacrificing the factory look of their engine bay.
Vargas Turbo Technologies - Corporate Logo
T#:47644924
Part#: VTT-G9X-INTAKE
Ships in 10 Business Days
Starting at $ 1,099.00 USD
Free Shipping on orders $49 and up
Starting at $ 1,099.00 USD
Free Shipping on orders $49 and up
Vargas Turbo Technologies proudly introduces the first complete intake system for the G90/G99 M5 that removes every factory airflow restriction from turbo to filter. While other intake kits only replace the upper portion of the system and leave the highly restrictive OEM turbo inlet pipes untouched, VTT addresses the real choke point, delivering a full solution, not a half measure. This fully engineered system replaces the entire factory tract with CNC-machined 6061-T6 billet adapters that bolt directly to the turbochargers, transitioning into reinforced 2.5” to 4” high-temperature silicone and finishing with dual VTT 4” dry-flow filters. The result is a true full-flow intake with zero factory bottlenecks, allowing the S68 to finally breathe the way it should.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51778121
Part#: VTT-SUPRA-CF-LID
Ships in 10 Business Days
New Item
$ 444.99 USD
Free Shipping
$ 444.99 USD
Free Shipping
Elevate the performance and visual appeal of your B58-powered Supra or Z4 with the VTT Carbon Fiber Intake Lid and Filter system.


K&N - Corporate Logo
T#:2943913
Part#: 69-2026TTK
Special Order: No Guaranteed ETA
$ 380.99 USD
Free Shipping
$ 380.99 USD
Free Shipping

The 2014 redesign of the MINI Cooper introduced notable improvements, retaining its iconic status in the automotive world. Despite becoming slightly larger, it remained smaller than most subcompact competitors. With additional rear seat legroom, cargo space, and new turbocharged engines, the MINI Cooper experienced an upgrade. For owners seeking more power, K&N Typhoon performance air intake system 69-2026TTK offers a guaranteed horsepower and torque boost for 2014, 2015, and 2016 Mini Cooper 1.5-liter or 2.0-liter turbo models. Here are the key benefits:

  • Guaranteed increase in horsepower and torque
  • Compatibility with 2014-2016 Mini Cooper 1.5L or 2.0L turbo models
  • Estimated horsepower gain of 6.55 HP @ 3200 RPM
  • Not legal for sale or use in California
  • Million Mile limited warranty
Show More Show Less