BMW Performance Intake Kits

Elevate your BMW experience with the Turner Motorsport E90 E92 M3 Titanium Valved Axle-Back Exhaust. This cutting-edge system offers exotic exhaust notes, weight reduction, and a noticeable performance boost. The muffler valves provide a tame, factory-like sound with a hint of exotic character when closed, and transform your car into an exotic beast when opened, thanks to the supplied valve controller.

For those who prefer to keep their factory cats, this exhaust setup is the ideal choice. It leaves all 4 factory cats in place, ensuring 100% emissions legality. The Mandrel bent dual 2.5” Ti22 pipes and high-flow, valved Titanium mufflers provide efficient gas flow and a dual-purpose exhaust system that satisfies both neighbors and performance enthusiasts.

Kit Includes:

• Turner Axle back Exhaust with X pipe
• Turner Adapter pipes for Factory Mid Pipes
• Turner Muffler Valve Controller Kit
• Turner Engraved Exhaust Tips

Features:

• Mandrel bent dual 2.5” Ti22 pipe
• Turner Engraved Brushed exhaust tips
• High flow, valved, Titanium mufflers
• Accuseal slip-fit joints for easy fitment
• Utilizes factory exhaust hangers

Upgrade your M3 with the Turner Motorsport E90 E92 M3 Titanium Valved Axle-Back Exhaust for a perfect blend of style and performance.

Add power and sound to your E36 with a performance exhaust system and free-flowing intake!

Performance Axle-Back Exhaust - E36 M3:

Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.

Our new E36 cat-back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.

To accomplish these goals our engineers revved up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.

We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.

Non-M Fitment:
Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

- CLICK HERE - for a sample of just how good your S50 or S52 can sound!

Why the upgrade?

By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:

- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.

- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.

- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.

Features and Benefits:

Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Durable 304 Stainless Steel
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section
Installation:

- Click HERE for Installation Instructions -

Product Development:

Our Turner E36 Exhaust was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Performance Carbon Intake Systems - E36 6 Cyl Models:

In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.

Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.

Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.

Features and benefits:

Increased air flow
Added air induction volume
Upgraded silicone throttle body MAF inlets
Enhanced engine bay aesthetic
Retains factory cold air inlet
Factory cruise control mounting
Individualized designs for all 6 cylinder variations
Design:

Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations
Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air
Utilizes stock mounting locations on frame rail and wheel arch
Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location
Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference
3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer
Retains Stock MAF Sensor
High-gloss carbon intake cover
Air box mounting for IAT sensor
Kit Contents:

Aluminum airbox - powder coat black
Carbon fiber intake cover
Reinforced silicone throttle body inlet
Reinforced silicone MAF coupler
Aluminum intake inlet - powder coat black
Charcoal canister spacer (obd1 specific)
Turner high flow oiled cone filter
Installation hardware
Product Devlopment:

Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.

Installation:

- Click HERE for Installation Instructions -

Add power and sound to your E36 with a performance exhaust system and free-flowing intake!

Performance Axle-Back Exhaust - E36 M3:

Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.

Our new E36 cat-back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.

To accomplish these goals our engineers revved up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.

We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.

Non-M Fitment:
Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

- CLICK HERE - for a sample of just how good your S50 or S52 can sound!

Why the upgrade?

By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:

- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.

- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.

- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.

Features and Benefits:

Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Durable 304 Stainless Steel
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section
Installation:

- Click HERE for Installation Instructions -

Product Development:

Our Turner E36 Exhaust was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Performance Carbon Intake Systems - E36 6 Cyl Models:

In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.

Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.

Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.

Features and benefits:

Increased air flow
Added air induction volume
Upgraded silicone throttle body MAF inlets
Enhanced engine bay aesthetic
Retains factory cold air inlet
Factory cruise control mounting
Individualized designs for all 6 cylinder variations
Design:

Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations
Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air
Utilizes stock mounting locations on frame rail and wheel arch
Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location
Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference
3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer
Retains Stock MAF Sensor
High-gloss carbon intake cover
Air box mounting for IAT sensor
Kit Contents:

Aluminum airbox - powder coat black
Carbon fiber intake cover
Reinforced silicone throttle body inlet
Reinforced silicone MAF coupler
Aluminum intake inlet - powder coat black
Charcoal canister spacer (obd1 specific)
Turner high flow oiled cone filter
Installation hardware
Product Devlopment:

Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.

Installation:

- Click HERE for Installation Instructions -

Revolutionize your driving experience with the E46 M3 Valved Performance Catback Exhaust from Turner. Crafted for the discerning driver, this lightweight and free-flowing exhaust boast two independent valved mufflers, offering two distinct driving experiences. Shedding 19lbs or more from the factory exhaust, the Turner catback delivers refined daily driving with closed valves, providing a smooth exhaust note. When the valves open, unleash an untamed racecar roar, experiencing heightened performance and a pure S54 sound. The flexibility to switch between the two at the touch of a button offers the best of both worlds.

Key Features:

• 19lbs or more weight savings
• In-house design using FARO ARM laser scanning and SolidWorks 3D CAD modeling
• Retains factory emissions
• Compatible with factory or aftermarket headers/front sections
• Mandrel-bent dual 2.5" 304SS pipe
• High-flow dual valved, stainless steel mufflers
• Vacuum actuated valves for adjustable sound
• Integrated x-pipe for improved exhaust note
• Kit includes E46 M3 midsection, dual valved mufflers, valve actuators, remote key fobs, exhaust gaskets and hardware, new center exhaust hangers
• Optional 3.5" Brushed or Chrome tips
• Free Doorbuster: S54 Open Intake

FREE Doorbuster S54 Open Intake:

Amplify airflow and let your S54 breathe with the Turner Open Intake System. With a 200% greater flow than the factory airbox, this intake enhances induction noises, providing an exhilarating auditory experience. The design integrates seamlessly with OE fresh air scoops, maintaining stock mounting locations and incorporating a 4" conical filter for maximum flow and filtration efficiency.

Features:

• 200% greater flow than the factory airbox
• Wrinkle Black Powdercoated Heat Shield
• Precision fit heat shield for cool air intake
• Utilizes OE fresh air inlet scoop
• Aluminum MAF housing maintains OEM MAF scaling
• 4" conical hi-flow reusable air filter

Lightweight performance exhaust for your E36, featuring a 3.0" valved muffler and controller to change the sound with the click of a button with

Performance Valved Cat-Back Exhaust - E36 M3:

Our new E36 Axle Back Exhaust is a versatile exhaust offering a number of options for E36 owners. With the factory exhaust you can upgrade to having valve control for different tone and volume options on the fly. For the fully upgraded or turbo owners this exhaust features a 2.0" to 3.0" exhaust pipe conversion and full 3.0" valved muffler that can be used with a custom full 3.0" exhaust.

When it comes to shopping for exhausts you want to find one that suits your driving style and sound preference. While one part of you wants to have a loud and aggressive sounding exhaust, there is another part of you that knows you don't want to wake up the neighborhood or annoy your significant other. Finally the answer to your dilemma, thanks to our engineers at Turner you no longer need to choose between rowdy and tame. With your new light-weight performance exhaust you have the option to go from tame and tasteful to loud and rowdy.

Our Valved exhaust was designed specifically for your E36 and there are no other options on the market like this. Control the tone and volume of your exhaust with the click of a button. With the valves closed you have a nice low tone and hearty exhaust note. When the valves are open you get complete unrestricted access to sound and power for when your at the track or just in the mood to let it rip.

Our Turner catback features dual 2.0" to 3.0" adapter that connects directly to your factory mid-pipes. From the adapter is full 3.0" exhaust piping with a smooth flow path to lower back pressure which leads to increased performance and a smoother exhaust tone. The 3.0" rear exhaust section flows into a full 3" valved muffler. The muffler features integrated 3" exhaust tips for an aggressive look that fills out your rear diffuser to get the perfect appearance.

New in 2023 you have two new options for E36 exhausts, our Turner valved and non valved axle back exhaust setups. With our Non Valved Axle-Back you achieve a happy medium of volume and tone but without the ability to adjust the volume. Our Valved Axle-Back is another variation and a true weapon, not only does it have the option to fit to your factory exhaust system but it is also the clear option for those looking to make a full 3.0" exhaust. After putting together the front 3.0" exhaust section you can assemble it with our Turner Valved Axle-Back for not only a full custom 3.0" exhaust but also have the luxury of volume control all with perfectly paired integrated 90's styled exhaust tips that fill out the rear valance with perfect proportions.

- CLICK HERE - for a sample of just how good your S50 or S52 can sound!

Non-M Fitment:
Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

Features and Benefits:

Adjustable exhaust volume
Improved flow
Dual 2.0" to 3.0" exhaust adapter
3.0" Pipe diameter (great to utilize with 3.0" turbo back while having volume control!)
Lightweight (28lbs!)
Retains factory emissions
Utilizes factory exhaust hangers
Compatible with M3 and replica M3 rear bumpers
Compatible with NON-M bumpers with hanger modification
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
2.5"-3.0" Stainless Steel Mandrel Bent Tubing
Sheet metal mounting brackets to utilize stock mounting locations
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Designed for smoother flow path and less backpressure
Kit Contents:

Dual 2.0" to 3.0" adapter
3.0" mid pipe section
Full 3.0" turbo-style valved muffler with integrated tips
Valve controller with installation kit and 2 key fob controllers
Clamps and hardware for installation
Installation:

- Click HERE for Installation Instructions -

Product Development:

Our Turner E36 Axle Back was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Performance Carbon Intake Systems - E36 OBD1 6 Cyl Models:

In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.

Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.

Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.

Features and benefits:

Increased air flow
Added air induction volume
Upgraded silicone throttle body MAF inlets
Enhanced engine bay aesthetic
Retains factory cold air inlet
Factory cruise control mounting
Individualized designs for all 6 cylinder variations
Design:

Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations
Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air
Utilizes stock mounting locations on frame rail and wheel arch
Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location
Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference
3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer
Retains Stock MAF Sensor
High-gloss carbon intake cover
Air box mounting for IAT sensor
Kit Contents:

Aluminum airbox - powder coat black
Carbon fiber intake cover
Reinforced silicone throttle body inlet
Reinforced silicone MAF coupler
Aluminum intake inlet - powder coat black
Charcoal canister spacer (obd1 specific)
Turner high flow oiled cone filter
Installation hardware
Product Devlopment:

Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.

Installation:

- Click HERE for Installation Instructions -

In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.

Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.

Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.

Features and benefits:

Increased air flow
Added air induction volume
Upgraded silicone throttle body MAF inlets
Enhanced engine bay aesthetic
Retains factory cold air inlet
Factory cruise control mounting
Individualized designs for all 6 cylinder variations
Design:

Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations
Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air
Utilizes stock mounting locations on frame rail and wheel arch
Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location
Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference
3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer
Retains Stock MAF Sensor
High-gloss carbon intake cover
Air box mounting for IAT sensor
Kit Contents:

Aluminum airbox - powder coat black
Carbon fiber intake cover
Reinforced silicone throttle body inlet
Reinforced silicone MAF coupler
Aluminum intake inlet - powder coat black
Charcoal canister spacer (obd1 specific)
Turner high flow oiled cone filter
Installation hardware
Product Devlopment:

Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.

Installation:

- Click HERE for Installation Instructions -

In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.

Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.

Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.

Features and benefits:

Increased air flow
Added air induction volume
Upgraded silicone throttle body MAF inlets
Enhanced engine bay aesthetic
Retains factory cold air inlet
Factory cruise control mounting
Individualized designs for all 6 cylinder variations
Design:

Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations
Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air
Utilizes stock mounting locations on frame rail and wheel arch
Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location
Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference
3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer
Retains Stock MAF Sensor
High-gloss carbon intake cover
Air box mounting for IAT sensor
Kit Contents:

Aluminum airbox - powder coat black
Carbon fiber intake cover
Reinforced silicone throttle body inlet
Reinforced silicone MAF coupler
Aluminum intake inlet - powder coat black
Charcoal canister spacer (obd1 specific)
Turner high flow oiled cone filter
Installation hardware
Product Devlopment:

Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.

Installation:

- Click HERE for Installation Instructions -

Enhance your BMW's performance and sound with the Turner Motorsport N54 Valved Catback Exhaust. This exhaust system delivers a dual-purpose experience, offering a subdued note with the muffler valves closed, maintaining a near-factory sound. Open the valves with the included controller, and unleash a menacing growl, transforming your driving experience. Crafted with mandrel-bent dual 2.5" 304SS pipes and a high-flow valved stainless steel muffler, this system is a bolt-on replacement for the OE version, ensuring easy fitment with Accuseal slip-fit joints. Elevate your 335i's exhaust with the Turner Motorsport E9X 335i full exhaust system, available as Axle Back, Cat-back, or Turbo back.

Key Features:

• Dual 2.5" 304SS pipes with brushed finish
• Valved stainless steel muffler for dual-sound experience
• Accuseal slip-fit joints for easy fitment
• Turner Engraved Polished exhaust tips
• Utilizes factory exhaust hangers for straightforward installation

Kit Includes:

• Turner Mid Pipes for factory catted mid pipes
• Turner Valved Exhaust
• Muffler Valve Controller Kit
• Turner Engraved Exhaust Tips
• Gaskets and Nuts

Add power and sound to your E36 with a performance exhaust system and free-flowing intake!

Performance Axle-Back Exhaust - E36 M3:

Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.

Our new E36 cat-back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.

To accomplish these goals our engineers revved up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.

We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.

Non-M Fitment:
Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

- CLICK HERE - for a sample of just how good your S50 or S52 can sound!

Why the upgrade?

By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:

- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.

- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.

- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.

Features and Benefits:

Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Durable 304 Stainless Steel
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section
Installation:

- Click HERE for Installation Instructions -

Product Development:

Our Turner E36 Exhaust was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Performance Carbon Intake Systems - E36 6 Cyl Models:

In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.

Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.

Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.

Features and benefits:

Increased air flow
Added air induction volume
Upgraded silicone throttle body MAF inlets
Enhanced engine bay aesthetic
Retains factory cold air inlet
Factory cruise control mounting
Individualized designs for all 6 cylinder variations
Design:

Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations
Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air
Utilizes stock mounting locations on frame rail and wheel arch
Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location
Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference
3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer
Retains Stock MAF Sensor
High-gloss carbon intake cover
Air box mounting for IAT sensor
Kit Contents:

Aluminum airbox - powder coat black
Carbon fiber intake cover
Reinforced silicone throttle body inlet
Reinforced silicone MAF coupler
Aluminum intake inlet - powder coat black
Charcoal canister spacer (obd1 specific)
Turner high flow oiled cone filter
Installation hardware
Product Devlopment:

Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.

Installation:

- Click HERE for Installation Instructions -

Enhance your engine bay's aesthetics with the sleek carbon fiber airbox lid from Vargas Turbo Technologies!

VTT rigorously tested the stock air intake on a dynamometer and found limited areas for enhancement. Drawing inspiration from BMW's design, VTT crafted a carbon fiber lid for the factory airbox.

Constructed entirely from 100% carbon fiber, this lid features an eight-layer design with a 1.3mm thick UV-resistant shell, ensuring long-lasting durability.

The included high-performance air filter, made from a high-flow cotton weave, comes pre-oiled to trap contaminants while maintaining optimal airflow.

Key Features:

50-state emissions compliant Simple, straightforward installation Stunning carbon fiber appearance Reusable high-performance air filter Easily reversible upgrade Transform your B58-equipped BMW with the Carbon Fiber Airbox Lid & Filter Kit from Vargas Turbo Technologies today!

Elevate the performance and sound of your S55-powered F80 or F82 with the Turner F80 F82 M3/M4 Stainless Performance CATBACK Exhaust - Valved. Turner's engineers designed this exhaust system to maximize flow, capturing the full unrestricted sound of the twin-turbo inline-6 S55 engine. The dual 2.5" stainless exhaust pipes lead into a meticulously designed muffler, ensuring superior flow even with the exhaust valves closed. Enjoy the flexibility to control the exhaust's aggressiveness beyond factory capabilities. The Turner Stainless exhaust, with its direct fitment and straightforward installation, stands as the optimal choice for your mission to find the best exhaust.

Key Features:

• In-house design and engineering for precision fitment
• 304SS pipe material with a natural finish
• 2.5" OD mandrel-bent tubing
• Barbed exhaust hangers Tig-Welded in OE locations
• Valved muffler optimized for superior flow
• Utilizes factory valve control
• High-flow middle muffler section for enhanced sound, performance, and weight savings
• Dual 2.5" 304SS Mid-pipes
• Clamps, gaskets, and hardware for an OEM+ install
• Brushed Turner Exhaust tips - 2.5" Inlet, 4.0" Outlet

FREE Doorbuster Turner M3/M4 Street Open Intake System:

Experience enhanced intake noise and carbon fiber aesthetics with the FREE Doorbuster Turner M3/M4 Street Open Intake System. Turner's S55 intake provides improved functionality and seamlessly integrates with OEM inlet ducting and stock mounting locations. Meticulously engineered for correct MAF scaling to maintain precise AFRs, this street intake system features aluminum inlet pipes for cost-effectiveness.

Product Details:

• Aluminum Intake Tubes designed for clearance and gradual transitions
• MAF scaling matches factory intake for correct AFRs
• 6061-T6 black anodized aluminum MAF sensor flange and vacuum line port
• One-piece aluminum heat shields with wrinkle black powder coating
• Heat shields provide a barrier for hot air, supplied with pre-cut gold heat tape
• Conical hi-flow reusable air filters with 8-ply oiled cotton gauze
• Bellmouth filter flange inlet to reduce turbulence and maximize flow

Unleash the full potential of your E30! This limited-time Doorbuster combines our Performance Cat-Back Exhaust with our M20 Performance Intake Kit, delivering increased power, enhanced throttle response, and an aggressive exhaust note for a truly exhilarating driving experience.

E30 325 Performance Cat-Back Exhaust System

Our E30 Performance Cat-Back Exhaust is designed to improve flow, reduce weight, and deliver an iconic exhaust tone. Engineered with dual 2.25” mandrel-bent stainless steel tubing and an integrated X-pipe, this exhaust maximizes efficiency while providing a deep, aggressive sound that’s unmistakably BMW.

A Helmholtz resonator reduces unwanted drone around 2200 RPM, giving you a refined driving experience without sacrificing performance. With factory-style flanges, hanger locations, and a simple bolt-on design, installation is quick and hassle-free. Period-correct, angled slash-cut tips add style while signaling the performance lurking under your E30’s hood.

Key Features:

Dual 2.25” stainless steel mandrel-bent tubing for smoother flow Lightweight design (28.5 lbs) Integrated X-pipe for improved exhaust note and efficiency Deep, refined tone with increased volume Helmholtz resonator mitigates drone around 2200 RPM Retains factory emissions Uses factory hangers + included upgraded hanger Includes new ring gaskets (two different sizes) Durable 304 stainless steel Aggressive, engraved slash-cut tips Optimized pipe diameter and X-pipe for freer flow and louder, more engaging sound Offset flanges for perfect fitment to factory converters E30 M20 Performance Air Intake Kit

Turner’s M20 Performance Intake is designed to optimize airflow, improve throttle response, and support performance across the RPM range, all while maintaining a clean engine bay and stock sensor functionality.

The system retains the factory AFM elbow, mounts securely with a stainless steel bracket, and includes a powder-coated aluminum heatshield for heat protection and a polished look. A silicone inlet ensures durability and long-lasting performance. Early and late model E30s are both supported, with a built-in pass-through for late-model coolant overflow lines.

Key Features:

Compatible with all BMW E30 6-cylinder M20 engines

Retains stock AFM elbow and sensor function

Powder-coated aluminum heatshield for durability and heat protection

Silicone intake hose for long-lasting performance

Coolant overflow pass-through for late-model systems

Direct bolt-on installation, no permanent modifications required

Kit Contents:

Stainless steel AFM bracket

AFM inlet adapter and gasket

Silicone intake elbow

Turner blue cone filter

5052 powder-coated aluminum heatshield