BMW Catback Exhaust Systems

Looking to elevate the acoustics of your X3 M40i / X4 M40i with an exhaust system that not only offers a much-improved sound while retaining the flexibility associated with valves, but also raises the eye appeal beyond the mundane? Look no further than the Dinan valved cat-back to meet all your needs… and then some! 

The full cat-back requires no cutting and utilizes factory mounting locations that allow the Dinan exhaust system to be a straightforward and painless install. Fabricated from brushed 100% T304 stainless steel, TIG welded, and free of hydroformed pipe, the upgraded system is also a marked improvement from its predecessor - both in terms of material/construction as well as in overall looks. The most glaring change being the replacement of the OEM dual slip tips in favor of an M-inspired quad tip configuration. Despite the limited room, Dinan was determined to offer four individually functioning pathways/tips and not lessen the representation with Y-tips or other gimmickry.  The result is a proper quad setup furnished with cavity covering 3.75-inch (95mm) tips in either black ceramic or polished stainless ensuring the system can be appreciated even before it is heard.

While looks are important, the auditory advantages are what any enthusiast is truly after with an exhaust system, and the Dinan offering for the G01/G02 M40i platform delivers in spades. For not only aural enhancement via the elimination of the central collector/resonator, but also weight savings and simplicity. The stock single-to-dual pipe setup has been abandoned in favor of an enlarged, straight, unrestricted, and freer-flowing single pipe system. This pathway feeds into a Helmholtz-equipped muffler that limits frequencies associated with drone, as well as assists in altering the overall tone of the setup to deliver the signature low Dinan rumble. The no-nonsense design allows versatility in volume levels with the retained factory valve functionality. Go from refined when cruising (low RPM’s) to rowdy when in it (high RPM’s), with ease. Or better yet, pair the system with an exhaust valve remote and have full control of elevating or reducing the sound! When open, the system behaves as a straight pipe solution that promotes maximum flow and volume for an exhilarating and forceful chorus. When the valve is closed, however, exhaust gases are wholly redirected through the muffler and emit more tempered vocals acceptable for even the most sensitive ears. It is the perfect blend of civility when cruising or the full spectrum of auditory delight when in the throttle. No matter the situation, the Dinan valved cat-back exhaust system is the answer for the discerning enthusiast looking for sound without sacrifice.

Features:

Maximum gains of +6 HP and +5 lb-ft of torque

Enjoyably louder, sportier sound w/ a delightful octave drop

Drone abatement technologies used to reduce cabin resonance

Quad 3.75-inch (95mm) double-walled, polished (or black ceramic coated) clamp-on tips with laser engraved Dinan logo

Larger diameter piping for increased flow (83mm vs. 80mm) 

Factory resonator/collector removed for increased volume

7-pounds lighter than the stock system (60-pounds vs. Dinan: 53-pounds)

100% 304 Stainless Steel construction

Factory valve functionality retained; refined or rowdy from the same exhaust

Direct bolt-on w/ no cutting or welding required

Factory-like fitment with included mounting hardware and valve componentry for both pre-LCI and LCI compatibility

Akrapovic Sound Kit for BMW G80 G82 M3 M4 offers BMW owners the ability to control the sound of their Akrapovic exhaust system directly from the cockpit. Utilizing advanced Akrapovic technology, this kit allows drivers to switch between a quieter mode and a sportier exhaust sound. The system includes a receiver, already integrated into the Evolution exhaust system, which operates the actuators to open or close the exhaust valves. Drivers can manage the sound with the Sound Remote Controller or the latest smartphone app, compatible with both iOS and Android devices.

• Enhanced Control: Allows for easy switching between quiet and sporty exhaust modes.
• Advanced Technology: Features Akrapovic technology for precise sound management.
• Convenient Operation: Control the exhaust valves using the Sound Remote Controller or a smartphone app.
• Compatibility: Designed specifically for BMW G80 and G82 M3 and M4 models.
• Easy Integration: Receiver included in the Evolution system for straightforward installation.

Dinan sport mufflers are designed to compliment the M3 and not overpower the driver and passengers with harsh tones. Dinan engineers their exhausts to sound great and be a natural fit to the character of the car as well as produce more power and torque. Four 3.5" black ceramic tips engraved with the Dinan logo fill out the rear valence (choose either polished or satin black tips). Annoying highway drone has also been engineered out of the system. Dinan uses only 304 stainless steel in their systems for the maximum corrosion protection. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

Features of the F9X M3 Dinan Exhaust -

• Single channel design
• Sportier Sound
• 10 lbs lighter than stock part + 100% 304 stainless steel construction
• Simple installation using high quality BMW OEM clamps and hangers
• Quad 3" laser engraved black ceramic coated exhaust tips with Dinan logo
• 6 HP & 5 lb-ft of torque
• "Straight Through" canister design
• Helmholtz chamber to remove drone

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
2008-2013 E92/3 BMW M3

The Akrapovic Evolution exhaust systems for the BMW F30 335i & F32 435 are the result of the perfect integration of expertise, the best technology, and the use of the finest materials. Made of austenitic stainless steel, these systems feature a newly developed layout with two central link pipes replacing the single stock pipe, a new muffler design, and carbon fiber tailpipes.

This Akrapovic Evolution exhaust improves upon the stock exhaust system of the BMW 335i in numerous areas. The first visible improvement is the additional power of 7.1 HP (at 5.850 rpm) and 10.7 Nm (at 3500 rpm). The range between 2.000 rpm and 3.000 rpm and at 3.500 rpm was particularly improved. A noticeable improvement can also be observed at high RPM where the Evolution gives more power. This sporty elegance makes this Bavarian machine stand out from the rest and offers the taste of a more powerful version, accentuated with the additional power gains and weight losses of the Evolution system. The dual-mode ECU-controlled valve exhaust from Akrapovic offers stock-level sound at normal cruising, and a joyful deep sporty note when driving the 335i more dynamically. The Evolution systems replace the stock exhaust from the catalytic converters back.

Because of size and dimensions of this exhaust, it can not be shipped via conventional carriers such as UPS or FedEx, and must be shipped via Truck Frieght shipping. Not for sale outside the US or Canada.

This Akrapovic Exhaust fits the following BMWs:
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible 435i xDrive Convertible- Convertible
2014+ F36 BMW 435i Gran Coupe

Looking to elevate the acoustics of your X3 M40i / X4 M40i with an exhaust system that not only offers a much-improved sound while retaining the flexibility associated with valves, but also raises the eye appeal beyond the mundane? Look no further than the Dinan valved cat-back to meet all your needs… and then some! 

The full cat-back requires no cutting and utilizes factory mounting locations that allow the Dinan exhaust system to be a straightforward and painless install. Fabricated from brushed 100% T304 stainless steel, TIG welded, and free of hydroformed pipe, the upgraded system is also a marked improvement from its predecessor - both in terms of material/construction as well as in overall looks. The most glaring change being the replacement of the OEM dual slip tips in favor of an M-inspired quad tip configuration. Despite the limited room, Dinan was determined to offer four individually functioning pathways/tips and not lessen the representation with Y-tips or other gimmickry.  The result is a proper quad setup furnished with cavity covering 3.75-inch (95mm) tips in either black ceramic or polished stainless ensuring the system can be appreciated even before it is heard.

While looks are important, the auditory advantages are what any enthusiast is truly after with an exhaust system, and the Dinan offering for the G01/G02 M40i platform delivers in spades. For not only aural enhancement via the elimination of the central collector/resonator, but also weight savings and simplicity. The stock single-to-dual pipe setup has been abandoned in favor of an enlarged, straight, unrestricted, and freer-flowing single pipe system. This pathway feeds into a Helmholtz-equipped muffler that limits frequencies associated with drone, as well as assists in altering the overall tone of the setup to deliver the signature low Dinan rumble. The no-nonsense design allows versatility in volume levels with the retained factory valve functionality. Go from refined when cruising (low RPM’s) to rowdy when in it (high RPM’s), with ease. Or better yet, pair the system with an exhaust valve remote and have full control of elevating or reducing the sound! When open, the system behaves as a straight pipe solution that promotes maximum flow and volume for an exhilarating and forceful chorus. When the valve is closed, however, exhaust gases are wholly redirected through the muffler and emit more tempered vocals acceptable for even the most sensitive ears. It is the perfect blend of civility when cruising or the full spectrum of auditory delight when in the throttle. No matter the situation, the Dinan valved cat-back exhaust system is the answer for the discerning enthusiast looking for sound without sacrifice.

Features:

Maximum gains of +6 HP and +5 lb-ft of torque

Enjoyably louder, sportier sound w/ a delightful octave drop

Drone abatement technologies used to reduce cabin resonance

Quad 3.75-inch (95mm) double-walled, polished (or black ceramic coated) clamp-on tips with laser engraved Dinan logo

Larger diameter piping for increased flow (83mm vs. 80mm) 

Factory resonator/collector removed for increased volume

7-pounds lighter than the stock system (60-pounds vs. Dinan: 53-pounds)

100% 304 Stainless Steel construction

Factory valve functionality retained; refined or rowdy from the same exhaust

Direct bolt-on w/ no cutting or welding required

Factory-like fitment with included mounting hardware and valve componentry for both pre-LCI and LCI compatibility

The Akrapovic Evolution exhaust systems for the BMW F22/23 M240i are the result of the perfect integration of expertise, the best technology, and the use of the finest materials. Made of austenitic stainless steel, these systems feature a newly developed layout with two central link pipes replacing the single stock pipe, a new muffler design, and carbon fiber tailpipes.

This Akrapovic Evolution exhaust improves upon the stock exhaust system of the BMW M240i in numerous areas. The first visible improvement is the additional power of 6.5 HP (at 5500 rpm) and 12.6 Nm (at 3000 rpm). The range between 2.000 rpm and 3.500 rpm  was particularly improved. A noticeable improvement can also be observed at high RPM where the Evolution gives more power. This sporty elegance makes this Bavarian machine stand out from the rest and offers the taste of a more powerful version, accentuated with the additional power gains and weight losses of the Evolution system. The dual-mode ECU-controlled valve exhaust from Akrapovic offers stock-level sound at normal cruising, and a joyful deep sporty note when driving the M240i more dynamically. The Evolution systems replace the stock exhaust from the catalytic converters back.

Fitment:
2017+ F22/23 BMW M240i