Find Parts That Fit Your Vehicle

BMW Racing Brake Pads

Race pads work in the temperature ranges commonly seen from repeated braking from high speeds on the racetrack. It's the repeated hard braking from very high speeds that requires a very special brake pad. Nearly all street and mixed-use pads will become ineffective at serious track speeds. Racing brake pads are made up of metallic, ceramic, and composite materials that better manage escalating temperatures while also providing exceptional braking performance. Race pads work within a prescribed temperature range (usually in excess of 600*F) - seldom seen on the street. Rotor wear, especially when cold, is significantly more than any other pad. These pads also produce a lot of brake dust which is also corrosive to paint finishes (wheels, fenders, etc). However, when in their temperature ranges, these pads stop better than anything else.

Racing brake pads only work well when matched as a front and rear set. We do not recommend using only a front set when on the track. Although in some situations, mixing race compounds can be done to achieve specific results (brake balance, wheel lock-up, turn-in, etc).

Examples of the race pads we sell: Pagid Orange/Yellow/Black, Hawk HT10, Hawk Blue, Hawk DTC-60, Hawk DTC-70
Sort By:

Pagid - Corporate Logo
T#:404
Part#: U8019
Back Ordered
$ 445.99 USD
Free Shipping
$ 445.99 USD
Free Shipping

Developed for the "ring taxi" at the Nurburg ring-Pagid RSL19 racing brake pads for E60 M5 and E63 M6. 

Yellow RS 19: Racing Endurance: This compound has outstanding wear rates with very good initial bite. Due to its outstanding wear rate and driveability, PAGID endurance materials are often used at sprint races and track days as well.

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6

Show More Show Less
Suvneer - Corporate Logo
T#:52762490
Part#: ADP-006R
Ships in 5 Business Days
New Item
$ 361.99 USD
Free Shipping on orders $49 and up
Whether you are driving a 650i on the autobahn or an M5 on the track, these Adler pads deliver the precision and stability enthusiasts are seeking.
Suvneer - Corporate Logo
T#:52762486
Part#: ADP-005R
Ships in 5 Business Days
New Item
$ 656.99 USD
Free Shipping on orders $49 and up
Adler's Brake Pads are engineered for performance under high temperatures and maximum loads, offering a responsive bite that never wavers during intense driving.

Suvneer - Corporate Logo
T#:52762493
Part#: ADP-016R
Ships in 5 Business Days
New Item
$ 361.99 USD
Free Shipping on orders $49 and up
Complete your E36/E46 M3 braking overhaul with the Adler ADP-016R rear pads.

Suvneer - Corporate Logo
T#:52762492
Part#: ADP-015R
Ships in 5 Business Days
New Item
$ 361.99 USD
Free Shipping on orders $49 and up
Utilizing Adler's 2026-spec Japanese friction tech, these pads are essential for managing the increased power in M3s.
Suvneer - Corporate Logo
T#:52762485
Part#: ADP-004R
Ships in 5 Business Days
New Item
$ 361.99 USD
Free Shipping on orders $49 and up
Designed for the modern BMW performance lineup, the Adler ADP-004R provides a responsive initial bite with unwavering stability.

Suvneer - Corporate Logo
T#:52762482
Part#: ADP-003R
Ships in 5 Business Days
New Item
$ 361.99 USD
Free Shipping on orders $49 and up
Represents the pinnacle of Adler’s Japanese racing heritage, offering a massive leap in stopping power over OEM pads for those who demand "real, honest" track performance.
Suvneer - Corporate Logo
T#:52657020
Part#: ADP-001R
Ships in 5 Business Days
New Item
$ 361.99 USD
Free Shipping on orders $49 and up
Developed with advanced Japanese friction technology, the Adler Performance Brake Pads deliver consistent braking performance under extreme heat.

Suvneer - Corporate Logo
T#:52657021
Part#: ADP-002R
Ships in 5 Business Days
New Item
$ 361.99 USD
Free Shipping on orders $49 and up
Precision-engineered in Japan, the Adler Performance Racing Brake Pads utilize an advanced compound that excels under high temperatures and maximum loads.

iSWEEP - Corporate Logo
T#:52340627
Part#: RC1726.IS3500
Ships in 7 Business Days
New Item
$ 862.99 USD
$ 862.99 USD
The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad.
Show More Show Less
iSWEEP - Corporate Logo
T#:14618129
Part#: R1644.IS3500
Ships in 7 Business Days
$ 495.00 USD
Free Shipping on orders $49 and up
$ 495.00 USD
Free Shipping on orders $49 and up
The essential part of brake pad development is choosing the right frictional material to exhibit the ideal brake characteristics to suit its targeted usage. Usually, the formula requires a compromise; for example, a quiet and noise-free pad cannot be guaranteed against brake fade characteristics, at times increasingly worse than factory brake pads. A balance of braking properties is crucial. If the pad compound's effectiveness is increased, so must the initial braking characteristic for which both are correlated with the pedal control factor. Typically, the more experienced the driver, the more they will request a pad with increased linear braking characteristics with high fade resistance. Six varying frictional levels and characteristics have been developed to suit a wide array of user needs. These brake pads have undergone rigorous testing, such as long-term street testing and countless data logging from circuit use, to bring you the ideal iSWEEP brake pad. iSWEEP is a Japanese brake and suspension company. All products are developed and manufactured in Japan. for CIRCUIT / RACE USER Intended strictly for severe short and full racing courses. - Short circuit and full circuit use. - For racing using “S” tires. - Consistent and stable character during extended racing periods. - Proven stable performance at extremely high temperatures.
Show More Show Less
Pagid - Corporate Logo
T#:2098
Part#: U2683
Back Ordered
$ 254.99 USD
Free Shipping
$ 254.99 USD
Free Shipping
Yellow RSL19: Racing - Pagid's classic compound for endurance racing on the basis of the RS 14. A slight reduction of the friction value improves the modulation (controllability). Constant temperatures up to 600C (1.100F) are possible. The combination of friction value, fading stability and low wear rateson pads and discs (rotors) realized with this pad compound is unmatched up to now. Due to its outstanding wear rate and driveability, PAGID endurancematerials are often used at sprint races. A multiple winner of Daytona 24h, Le Mans 24h, Sebring 12h, Spa 24 h, Nurburgring 24h, often with no pad change and usually no disc (rotor) change.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brakepads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

Pagid Brake FRONT Pads to fit the following BMWs:
1991-1997 E31 8-series: 850i, 850Ci, 850CSi
1995-2001 E38 7-series: 740i, 740iS, 740iL
1997-2003 E39 5-series: 530i, 540i sedan, 540iT wagon, M5
1999-2006 E53 X5 SAV: X5 3.0i, X5 4.4i
Show More Show Less