BMW Engine Parts

MINI R53 MSD Performance Coil Pack / Red Wire Set

T#:31324148

Part#: 8239KT2KT

In Stock

$ 268.99 USD

Add to Wish List

Qty

$ 268.99 USD

Add to Wish List

MSD Performance Coil Pack for MINI

Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.

This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.

Kits Include:

MSD Coil Pack
MSD Wire Set - Red
Inductance: 7mH
Maximum Voltage: 36,000 Volts
Primary Resistance: 0.51 OHMs
Secondary Resistance: 12K OHMs
Turns Ratio: 77:1

Key Benefits:

Upgraded performance over stock coil pack
Enhances ignition efficiency and engine performance
High voltage output of 36,000 volts for stronger sparks
Low primary resistance of 0.51 OHMs for efficient energy transfer
High secondary resistance of 12K OHMs for improved performance
Durable construction for long-lasting use

Show More Show Less

Schrick Performance Camshaft Set - 238/272 - F80 M3, F82/83 M4 S55 ...

T#:637691

Part#: SCHCSSS55238/272

Back Ordered

$ 1,899.99 USD

Add to Wish List

Qty

$ 1,899.99 USD

Add to Wish List

High-performance camshafts are key to increasing the top-end power output of your S55 engine at high boost. 238/272 degree, 10.6mm/10.5mm lift. Perfectly compatible with OE valves, springs, VANOS, Valvetronic etc

Show More Show Less

Extended Spark Plug Socket

T#:391150

Part#: SUU884506

In Stock

9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

Qty

9% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

3/8" drive socket with 5/8" opening for most spark plugs

Performance Ignition Wire Set - Red W10 W11 1.6L Engine

T#:15777320

Part#: 32879

In Stock

11% off MSRP $ 152.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 135.99 USD

Add to Wish List

Qty

11% off MSRP

$ 152.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 135.99 USD

Add to Wish List

Revitalize your Mini's performance with these spark plug wires and boots, designed to restore power and ensure smooth engine operation. Replace them at 60,000-mile intervals to maintain optimal performance. If you experience low spark or misfires and it's not due to the coil or spark plugs, faulty wires may be the culprit. Don't let rust buildup hinder performance—replace these wires to ensure happy motoring and reliable spark.

Restores power and performance to your Mini
Recommended replacement at 60,000-mile intervals
Addresses issues such as low spark and misfires
Prevents rust buildup for consistent spark delivery
Includes plug wires for cylinder 1

Show More Show Less

Performance Camshaft Set - 238/272

T#:26904914

Part#: SCH-N52-238/272

Special Order: No Guaranteed ETA

$ 1,749.99 USD

Add to Wish List

Qty

$ 1,749.99 USD

Add to Wish List

BMW S85 10 Cyl. 296/284-Degree - Camshaft Set

T#:589847

Part#: S85-296-284KT

Ships on Nov 10, 2026

$ 2,113.99 USD

Add to Wish List

Qty

$ 2,113.99 USD

Add to Wish List

This is one full set of Schrick camshafts, 4 cams total, for the S85 V10 M5 engine. These cams are the 296/284 degree version and include two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V10 motor.

Show More Show Less

Power Pulley DPK Belt Kit

For vehicles with production date from 6/2008

T#:50934275

Part#: 13-001D

Ships in 3 Business Days

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

Free Up Real S65 Power — Engineered the Turner Way Your S65 is already making the power. This kit simply lets you keep more of it. The Active Autowerke Power Pulley Kit for the BMW E9X M3 reduces parasitic drag at the crankshaft, trimming rotational mass and freeing up horsepower that would otherwise be consumed by accessory drive load. The result is a measurable increase in rear-wheel output without sacrificing the balance, cooling capacity, or long-term durability expected from a properly engineered BMW upgrade. The crank pulley is CNC-machined from billet 6061 aluminum and finished with a hard-coat anodize for durability under sustained high-RPM operation. Unlike undersized pulleys that compromise system function, this design maintains proper operating characteristics while delivering real-world gains. Late-2007 production E9X M3 models transitioned to a double-sided (DPK) A/C belt configuration. Rather than forcing a workaround, Active Autowerke developed a proper DPK-compatible solution — including the correct matched belt. Applicable kits also include a spare DPK belt for added insurance. Dyno testing on a Mustang chassis dyno confirms gains of 10–12+ rear-wheel horsepower on an otherwise stock vehicle. Installation is fully reversible and requires no permanent modification. Product Highlights 10–12+ RWHP gain verified on stock S65 engines Complete bolt-on system CNC-machined 6061 billet aluminum crank pulley Hard-coat anodized finish for durability Includes correct replacement drive and A/C belts Spare DPK belt included where applicable Compatible with manual and DCT-equipped E9X M3 Reduces parasitic drag and rotational mass Designed to maintain proper operating temperatures Works in conjunction with Active Autowerke performance software Available for single-sided and double-sided (DPK) belt configurations Fitment Information Confirm whether your E9X M3 is equipped with a single-sided or double-sided (DPK) A/C belt prior to ordering to ensure correct application. A properly engineered solution for enthusiasts who want measurable gains while preserving OEM-level refinement and reliability.

Show More Show Less

HJS Oil Filter Housing Mount - E39

T#:556831

Part#: 11421407441

Ships on Aug 10, 2026

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

2 required per car

BMW M20 6 Cyl. 288-Degree - Camshaft

T#:26638223

Part#: 005601880-00

Special Order: No Guaranteed ETA

$ 1,189.99 USD

Add to Wish List

Qty

$ 1,189.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M20 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 288 Duration Intake @ 1mm - Duration Exhaust - 288 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 7, 3 Cam Lobe Lift Exhaust - 7, 3 Valve Lift w/o Valve Clearance Intake - 11, 4 Valve Lift w/o Valve Clearance Exhaust - 11, 4 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW M10 4 Cyl. 292-Degree - Counter Clockwise Distributor - Camshaft ...

For Vehicles With Counter Clockwise Distributor Only

T#:26005193

Part#: 000201920-02

Special Order: No Guaranteed ETA

$ 1,161.99 USD

Add to Wish List

Qty

$ 1,161.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 292 Duration Intake @ 1mm - 251 Duration Exhaust - 292 Duration Exhaust @ 1mm - 251 Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 7, 6 Cam Lobe Lift Exhaust - 7, 6 Valve Lift w/o Valve Clearance Intake - 10 Valve Lift w/o Valve Clearance Exhaust - 10 Valve Clearance Intake - 0, 2 Valve Clearance Exhaust - 0,2

Show More Show Less

BMW S14 4 Zyl. 4 Vent.

T#:26638236

Part#: 0227D1760-01

Special Order: No Guaranteed ETA

$ 1,403.99 USD

Add to Wish List

Qty

$ 1,403.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S14 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 276 Duration Intake @ 1mm - 245 Duration Exhaust - 276 Duration Exhaust @ 1mm - 245 Intake Peak Timing - 106 Exhaust Peak Timing - 106 Cam Lobe Lift Intake - 11, 3 Cam Lobe Lift Exhaust - 11, 3 Valve Lift w/o Valve Clearance Intake - 11, 3 Valve Lift w/o Valve Clearance Exhaust - 11, 3 Valve Clearance Intake - 0, 35 Valve Clearance Exhaust - 0,4

Show More Show Less

BMW M30 6 Cyl. 282-Degree - Monotronik- Camshaft

For Vehicles Equipped With Bosch Monotronik Only

T#:26638228

Part#: 002201820-01

Special Order: No Guaranteed ETA

$ 1,567.99 USD

Add to Wish List

Qty

$ 1,567.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M30 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 282 Duration Intake @ 1mm - Duration Exhaust - 282 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 8, 4 Cam Lobe Lift Exhaust - 8, 4 Valve Lift w/o Valve Clearance Intake - 10, 6 Valve Lift w/o Valve Clearance Exhaust - 10, 6 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW M20 6 Cyl. 272-Degree - Camshaft

T#:26638221

Part#: 005601720-00

Special Order: No Guaranteed ETA

$ 1,274.99 USD

Add to Wish List

Qty

$ 1,274.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M20 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 272 Duration Intake @ 1mm - Duration Exhaust - 272 Duration Exhaust @ 1mm - Intake Peak Timing - 111 Exhaust Peak Timing - 111 Cam Lobe Lift Intake - 7 Cam Lobe Lift Exhaust - 7 Valve Lift w/o Valve Clearance Intake - 11 Valve Lift w/o Valve Clearance Exhaust - 11 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW S14 4 Zyl. 4 Vent.

T#:26638235

Part#: 0227D1080-01

Special Order: No Guaranteed ETA

$ 1,619.99 USD

Add to Wish List

Qty

$ 1,619.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S14 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 308 Duration Intake @ 1mm - 277 Duration Exhaust - 308 Duration Exhaust @ 1mm - 277 Intake Peak Timing - 102 Exhaust Peak Timing - 102 Cam Lobe Lift Intake - 12, 2 Cam Lobe Lift Exhaust - 12, 2 Valve Lift w/o Valve Clearance Intake - 12, 2 Valve Lift w/o Valve Clearance Exhaust - 12, 2 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW M10 4 Cyl. 284-Degree - Counter Clockwise Distributor - Camshaft ...

For Vehicles With Counterclockwise Distributor Only!

T#:26638211

Part#: 000201840-02

Special Order: No Guaranteed ETA

$ 1,161.99 USD

Add to Wish List

Qty

$ 1,161.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 284 Duration Intake @ 1mm - 243 Duration Exhaust - 284 Duration Exhaust @ 1mm - 243 Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 7, 2 Cam Lobe Lift Exhaust - 7, 21 Valve Lift w/o Valve Clearance Intake - 9, 5 Valve Lift w/o Valve Clearance Exhaust - 9, 5 Valve Clearance Intake - 0, 2 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW M10 4 Cyl. 316-Degree - Clockwise Distributor - Camshaft ...

For Vehicles With Clockwise Distributor Only

T#:26638214

Part#: 000201160-03

Special Order: No Guaranteed ETA

$ 1,511.99 USD

Add to Wish List

Qty

$ 1,511.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 316 Duration Intake @ 1mm - 278 Duration Exhaust - 316 Duration Exhaust @ 1mm - 278 Intake Peak Timing - 100 Exhaust Peak Timing - 100 Cam Lobe Lift Intake - 9, 1 Cam Lobe Lift Exhaust - 9, 13 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Lift w/o Valve Clearance Exhaust - 11, 9 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW M42 4 Cyl. 264-Degree - Exhaust Camshaft

T#:26038540

Part#: 0256A1641-01

Special Order: No Guaranteed ETA

$ 1,351.99 USD

Add to Wish List

Qty

$ 1,351.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M42 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust - 264 Duration Exhaust @ 1mm - 227 Exhaust Peak Timing - 110 Cam Lobe Lift Exhaust - 10. 4 Valve Lift w/o Valve Clearance Exhaust - 10, 4 Valve Clearance Exhaust - Hydraulic

Show More Show Less

BMW US S50 6 Cyl. 296-Degree - Intake Camshaft

T#:26671611

Part#: 0284E1960-0V1

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the US S50 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake- 296 Duration Intake @ 1mm - 266 Intake Peak Timing - 122 Cam Lobe Lift Intake - 12, 4 Valve Lift w/o Valve Clearance Intake - 12, 4 Valve Clearance Intake - 0, 25

Show More Show Less

N54 Schrick Camshaft Set 268/265

T#:25739348

Part#: N54CAMSKT

Ships on Nov 10, 2026

Sale - Save 10% $ 3,415.99

This product was last offered at the strikethrough price on
07-07-2026

$ 3,074.39 USD

Add to Wish List

Qty

Sale - Save 10%

$ 3,415.99

This product was last offered at the strikethrough price on
07-07-2026

$ 3,074.39 USD

Add to Wish List

Take your N54-powered BMW to the next level with this upgraded camshaft kit from Schrick Cams! Increasing the air allowed in and out of the motor by increasing both lift and duration over stock is one of the most effective ways to add power to your car next to adding more boost. We recommend finding a competent tuner to get the most out of your individual setup. Duration Duration Intake: 268 Duration Intake @ 1mm: 219 Duration Exhaust: 264 Duration Exhaust @ 1mm: 214 Intake Peak Timing: 125,6 Exhaust Peak Timing: -128 Lift Cam Lobe Lift Intake: 7,2 Cam Lobe Lift Exhaust: 6,54 Valve Lift Without Valve Clearance Intake: 12 Valve Lift Without Valve Clearance Exhaust: 11 Valve Clearance Intake: hydr. Valve Clearance Exhaust:

Show More Show Less

BMW S50/S52 6 Cyl. 296-Degree - Intake Camshaft

T#:26671614

Part#: 0284E1960-0V2

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 296 Duration Intake @ 1mm - 266 Intake Peak Timing - 129 Cam Lobe Lift Intake - 12, 4 Valve Lift w/o Valve Clearance Intake - 12, 4 Valve Clearance Intake - 0, 25

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 14.0m...

T#:23847549

Part#: 0415A180001

Special Order: No Guaranteed ETA

$ 1,876.99 USD

Add to Wish List

Qty

$ 1,876.99 USD

Add to Wish List

BMW S50/S52 6 Cyl. 308-Degree - Exhaust Camshaft

T#:26671615

Part#: 0284A1080-1V2

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 308 Duration Exhaust @ 1mm - 274 Exhaust Peak Timing - 104 Cam Lobe Lift Exhaust - 13 Valve Lift w/o Valve Clearance Exhaust - 13 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW M10 4 Cyl. 328-Degree - Counter Clockwise Distributor - Camshaft ...

For Vehicles With Counter Clockwise Distributor Only

T#:26638215

Part#: 000201280-01

Special Order: No Guaranteed ETA

$ 1,511.99 USD

Add to Wish List

Qty

$ 1,511.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 328 Duration Intake @ 1mm - 287 Duration Exhaust - 316 Duration Exhaust @ 1mm - 273 Intake Peak Timing - 100 Exhaust Peak Timing - 100 Cam Lobe Lift Intake - 9, 2 Cam Lobe Lift Exhaust - 8, 51 Valve Lift w/o Valve Clearance Intake - 12 Valve Lift w/o Valve Clearance Exhaust - 11, 15 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW S50/S52 6 Cyl. 296-Degree - Exhaust Camshaft

T#:26671613

Part#: 0284A1960-0V2

Special Order: No Guaranteed ETA

$ 1,727.99 USD

Add to Wish List

Qty

$ 1,727.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 296 Duration Exhaust @ 1mm - 266 Exhaust Peak Timing - 76-114 Cam Lobe Lift Exhaust - 12, 4 Valve Lift w/o Valve Clearance Exhaust - 12, 4 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW US S50 6 Cyl. 296-Degree - Exhaust Camshaft

T#:26671609

Part#: 0284A1960-001

Special Order: No Guaranteed ETA

$ 1,727.99 USD

Add to Wish List

Qty

$ 1,727.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the US S50 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust - 296 Duration Exhaust @ 1mm - 266 Exhaust Peak Timing - 108 Cam Lobe Lift Exhaust - 12, 4 Valve Lift w/o Valve Clearance Exhaust - 12, 4 Valve Clearance Exhaust - 0,25

Show More Show Less

BMW M42 4 Cyl. 256-Degree - Intake Camshaft

T#:26038539

Part#: 0256E1561-00

Special Order: No Guaranteed ETA

$ 1,351.99 USD

Add to Wish List

Qty

$ 1,351.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M42 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake- 256 Duration Intake @ 1mm - Intake Peak Timing - 110 Cam Lobe Lift Intake - 10. 4 Valve Lift w/o Valve Clearance Intake - 10, 4 Valve Clearance Intake - Hydraulic

Show More Show Less

BMW M10 4 Cyl. 316-Degree - Counter Clockwise Distributor - Camshaft ...

For Vehicles With Counter Clockwise Distributor Only

T#:26638213

Part#: 000201160-04

Special Order: No Guaranteed ETA

$ 1,511.99 USD

Add to Wish List

Qty

$ 1,511.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 316 Duration Intake @ 1mm - 278 Duration Exhaust - 316 Duration Exhaust @ 1mm - 278 Intake Peak Timing - 100 Exhaust Peak Timing - 100 Cam Lobe Lift Intake - 9, 1 Cam Lobe Lift Exhaust - 9, 13 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Lift w/o Valve Clearance Exhaust - 11, 9 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW M42 4 Cyl. 272-Degree - Intake Camshaft

T#:26038541

Part#: 0256E1721-00

Special Order: No Guaranteed ETA

$ 1,351.99 USD

Add to Wish List

Qty

$ 1,351.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M42 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake- 272 Duration Intake @ 1mm - Intake Peak Timing - 110 Cam Lobe Lift Intake - 10. 4 Valve Lift w/o Valve Clearance Intake - 10, 4 Valve Clearance Intake - Hydraulic

Show More Show Less

BMW M10 4 Cyl. 304-Degree - Counter Clockwise Distributor - Camshaft ...

For Vehicles With Counter Clockwise Distributor Only

T#:26638212

Part#: 000201040-02

Special Order: No Guaranteed ETA

$ 1,161.99 USD

Add to Wish List

Qty

$ 1,161.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 304 Duration Intake @ 1mm - 262 Duration Exhaust - 304 Duration Exhaust @ 1mm - 262 Intake Peak Timing - 108 Exhaust Peak Timing - 108 Cam Lobe Lift Intake - 8, 2 Cam Lobe Lift Exhaust - 8, 21 Valve Lift w/o Valve Clearance Intake - 10, 5 Valve Lift w/o Valve Clearance Exhaust - 10, 5 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW M42 4 Cyl. 256-Degree - Exhaust Camshaft

T#:26038538

Part#: 0256A1561-00

Special Order: No Guaranteed ETA

$ 1,351.99 USD

Add to Wish List

Qty

$ 1,351.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M42 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust - 256 Duration Exhaust @ 1mm - Exhaust Peak Timing - 110 Cam Lobe Lift Exhaust - 10. 4 Valve Lift w/o Valve Clearance Exhaust - 10, 4 Valve Clearance Exhaust - Hydraulic

Show More Show Less

BMW M10 4 Cyl. 284-Degree - Clockwise Distributor - Camshaft ...

For Vehicles With Clockwise Distributor Only!

T#:26638210

Part#: 000201840-01

Special Order: No Guaranteed ETA

$ 1,161.99 USD

Add to Wish List

Qty

$ 1,161.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 284 Duration Intake @ 1mm - 243 Duration Exhaust - 284 Duration Exhaust @ 1mm - 243 Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 7, 2 Cam Lobe Lift Exhaust - 7, 21 Valve Lift w/o Valve Clearance Intake - 9, 5 Valve Lift w/o Valve Clearance Exhaust - 9, 5 Valve Clearance Intake - 0, 2 Valve Clearance Exhaust - 0,3

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

MSD Performance Coil Pack for MINI

Kits Include:

Key Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results