Find Parts That Fit Your Vehicle

Turbos

If more boost and reliability are your goals choose from one of our BMW turbo upgrades. Our turbo upgrades range from stock turbos rebuilt with stronger internals to all-new, ground-up turbo upgrades. BMW turbos such as the N54 are capable of really impressive power numbers on stock engine internals but the factory turbos lack the precise tolerances and reliability that an upgraded unit will deliver. In other words, the stock turbos can only do so much and if big power (>400whp) is your goal a turbo upgrade must be in your plans. Our partners are leading experts in turbo technology and upgrades. Each Stage has been professionally developed and tested. Additional upgrades and tuning may be, or is, required. Contact us for more details on tuning options.

Sub-Categories

Sort By:
MAC Single Turbo Boost Solenoid - N54 N55
MAC Single Turbo Boost Solenoid - N54 N55
Burger Motorsports - Corporate Logo
T#:587715
Part#: MACSTS
Ships in 1-2 days
$ 51.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 51.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!
BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87
BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87
Burger Motorsports - Corporate Logo
T#:43109033
Part#: BMS-HFSTI-FN55
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.
Show More Show Less
Coolant Port Block Off Plugs for N54 Single Turbo Conversion
Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...
Burger Motorsports - Corporate Logo
T#:23880741
Part#: N54STCCPBO
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.
Show More Show Less
Burger Motorsports Blow Off Valve Adapter - Gen3 B58
Burger Motorsports Blow Off Valve Adapter - Gen3 B58
Burger Motorsports - Corporate Logo
T#:38655170
Part#: BMS-BOVA-G3B58
In Stock
$ 99.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 99.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.
Show More Show Less
N54 Single Turbo Conversion Oil Fitting
N54 Single Turbo Conversion Oil Fitting
Burger Motorsports - Corporate Logo
T#:23880740
Part#: N54STCOCF
Back Ordered
$ 25.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 25.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.
Show More Show Less
Turbo & Intake Heat Shield - Gen1 B58
Turbo & Intake Heat Shield - Gen1 B58
Burger Motorsports - Corporate Logo
T#:49857410
Part#: BMSB58THS
Ships on Oct 28, 2026
$ 119.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 119.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance
Show More Show Less
Turbo & Intake Heat Shield - Gen2 B58
Turbo & Intake Heat Shield - Gen2 B58
Burger Motorsports - Corporate Logo
T#:49857413
Part#: BMSG2B58THS
Ships on Oct 28, 2026
$ 119.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 119.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance
Show More Show Less
Vaico Turbo Oil Supply Line - Right/Passenger Side (Cyl 1-4) - BMW N63 S63 4.4L
Vaico Turbo Oil Supply Line - Right/Passenger Side (Cyl 1-4) - BMW N6...
Vaico - Corporate Logo
T#:41492598
Part#: 11427934654
Special Order: No Guaranteed ETA
$ 43.99

This product was last offered at the strikethrough price on
05-13-2026

$ 41.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 41.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Eliminate oil leaks and keep you turbo healthy with this replace oil feed/supply line from Vaico

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Shipping