Find Parts That Fit Your Vehicle

BMW Intake Parts

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

BMC - Corporate Logo
T#:398738
Part#: FB928/20
In Stock at Vendor
$ 91.99 USD
Free Shipping
$ 91.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:2393415
Part#: FB01103
In Stock at Vendor
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping

BMW N63 4.4L BMC Performance Air Filter - Set is designed to enhance engine performance by replacing the OEM air filter with a high-quality upgrade. This panel/cylindrical air filter fits directly into the vehicle's original airbox, offering improved air flow and filtration efficiency. Made from advanced materials, it provides superior filtration, capturing impurities as small as 7 microns, compared to the 10 microns of the standard OEM filter.

  • Enhanced Air Flow: Improves engine breathing and performance by allowing more air to flow into the engine.
  • Superior Filtration: Captures particles as small as 7 microns, offering better protection compared to the OEM filter.
  • Increased Efficiency: Optimizes the air-to-fuel ratio for improved engine efficiency and power output.
  • Direct Replacement: Fits seamlessly into the original airbox without the need for modifications.
  • Long-Term Durability: Made from high-performance materials for extended lifespan and reliable performance.
Show More Show Less
BMC - Corporate Logo
T#:398705
Part#: FB647/20
In Stock at Vendor
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:2393417
Part#: FB01118
In Stock at Vendor
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.

BMC - Corporate Logo
T#:398690
Part#: FB577/08
In Stock at Vendor
$ 125.99 USD
Free Shipping
$ 125.99 USD
Free Shipping
>Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:398736
Part#: FB866/04
In Stock at Vendor
$ 218.99 USD
Free Shipping
$ 218.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:641644
Part#: FB01054
In Stock at Vendor
$ 102.99 USD
Free Shipping
$ 102.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:397411
Part#: FB132/01
In Stock at Vendor
$ 84.99 USD
Free Shipping
$ 84.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:637734
Part#: FB01034
In Stock at Vendor
$ 201.99 USD
Free Shipping
$ 201.99 USD
Free Shipping
BMC air filters are produced using a "Full Moulding" system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes. BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:398688
Part#: FB447/01
In Stock at Vendor
$ 196.99 USD
Free Shipping
$ 196.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:398733
Part#: FB740/20
In Stock at Vendor
$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less


BMC - Corporate Logo
T#:2393408
Part#: FB813/01
In Stock at Vendor
$ 97.99 USD
Free Shipping
$ 97.99 USD
Free Shipping
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
BMC - Corporate Logo
T#:398714
Part#: FB654/20
In Stock at Vendor
$ 157.99 USD
Free Shipping
$ 157.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:398735
Part#: FB821/04
In Stock at Vendor
$ 130.99 USD
Free Shipping
$ 130.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:398689
Part#: FB494/20
In Stock at Vendor
$ 100.99 USD
Free Shipping
$ 100.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:2393420
Part#: FB01090
Ships in 2 Business Days
$ 328.99 USD
Free Shipping
$ 328.99 USD
Free Shipping
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
BMC - Corporate Logo
T#:398706
Part#: FB651/20
Back Ordered
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:398704
Part#: FB630/20
In Stock at Vendor
$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:398727
Part#: FB702/20
In Stock at Vendor
$ 88.00 USD
Free Shipping
$ 88.00 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:589042
Part#: FB01073
In Stock at Vendor
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping
BMC air filters are produced using a "Full Moulding" system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes. BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:567651
Part#: FB536/08
In Stock at Vendor
$ 125.99 USD
Free Shipping
$ 125.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit. ​For vehicles with production date from 09/2009
Show More Show Less
BMC Drop-In Performance Air Filter - Single Filter - BMW G01 X3 M40i ...
Special Order Item - May take up to 4 weeks to be delivered to our facility
BMC - Corporate Logo
T#:10746839
Part#: FB01041
In Stock at Vendor
$ 104.99 USD
Free Shipping on orders $49 and up
BMC air filters are produced using a "Full Molding" system that enables the characteristic red filter to be realized from a single mold with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes. BMC filters are made of a multi-layered cotton gauze soaked with low-viscosity oil covered with an epoxy-coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit. Replaces BMW P/N: 13718581691
Show More Show Less
BMC - Corporate Logo
T#:584728
Part#: FB929/20
Back Ordered
$ 97.99 USD
Free Shipping
$ 97.99 USD
Free Shipping
BMC air filters are produced using a "Full Molding" system that enables the characteristic red filter to be realized from a single mold with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes. BMC filters are made of a multi-layered cotton gauze soaked with low-viscosity oil covered with an epoxy-coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit. Replaces BMW P/Ns: 13718577170, 13718577171,13718691835
Show More Show Less


BMC - Corporate Logo
T#:398700
Part#: FB584/20
Back Ordered
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:2408501
Part#: FB763/20
Back Ordered
$ 91.99 USD
Free Shipping
$ 91.99 USD
Free Shipping
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
BMC - Corporate Logo
T#:586059
Part#: FB930/01
In Stock at Vendor
$ 196.99 USD
Free Shipping
$ 196.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:398680
Part#: FB117/01
Back Ordered
$ 71.99 USD
Free Shipping
$ 71.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:397417
Part#: FB518/08
Back Ordered
$ 83.99 USD
Free Shipping
$ 83.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:398732
Part#: FB730/20
Back Ordered
$ 97.99 USD
Free Shipping
$ 97.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:398703
Part#: FB608/20
Back Ordered
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:2393419
Part#: FB01091
In Stock at Vendor
$ 100.99 USD
Free Shipping
$ 100.99 USD
Free Shipping
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.

BMC - Corporate Logo
T#:30960447
Part#: ACOTASP-20
Ships in 2 Business Days
$ 437.99 USD
Free Shipping on orders $49 and up

BMC - Corporate Logo
T#:39261788
Part#: FB01177
Back Ordered
$ 100.00 USD
Free Shipping on orders $49 and up
This BMC air filter is a premium upgrade that ensures your BMW engine breathes cleaner and performs better. With a precision-fit design, it seamlessly replaces the stock air filter, delivering increased airflow for enhanced acceleration. The durable cotton gauze material is washable and reusable, reducing waste and saving money over time.
Show More Show Less
BMC - Corporate Logo
T#:398737
Part#: FB902/20
Back Ordered
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
AEM Electronics - Corporate Logo
T#:369781
Part#: 30-3000
In Stock
11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
11% off MSRP
$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing
Show More Show Less


AEM Electronics - Corporate Logo
T#:20815166
Part#: 30-3313
In Stock
12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
12% off MSRP
$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.
Show More Show Less
AEM Electronics - Corporate Logo
T#:590418
Part#: 30-3304
In Stock at Vendor
11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
11% off MSRP
$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

  • Enhances performance and efficiency for BMW and MINI vehicles
  • Maximizes power output while ensuring engine safety
  • Internal MAP sensor for precise control
  • 35PSI maximum pressure capacity for reliability
  • Improves horsepower, torque, and fuel economy
Show More Show Less
AEM Electronics - Corporate Logo
T#:20815164
Part#: 30-3326
In Stock at Vendor
11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
11% off MSRP
$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector
Show More Show Less