Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Arguably THE BEST modification for your B46/B48. This muffler delete sounds too good to be a 4 cylinder! The combination of B48 and muffler delete surpasses all sound expectations from a 4-cylinder! Impressive direct-fit solution. With this new muffler delete you can transform the sound and driving experience of your 330 or 430. A simple installation that can be completed with hand tools gives you the ability to take your car to the next level at home in your garage!
The ECS B48 muffler delete removes the heavy and restrictive factory exhaust muffler and replaces it with a high-flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, our muffler delete shaves off 21.0 lbs., weighing in at only 7.0lbs compared to the OEM muffler at 28.0lbs!
Features and benefits:
Enhanced exhaust tone
Simple installation (with instructions!)
21lb weight savings! (Factory muffler 28 lbs, muffler delete 7 lbs!)
Tip adjustment capability
Slide farther on for left and right adjustment
Rotate for verticle adjustment
Good looking and durable 304 stainless steel construction
Heavy-duty fabricated sheet metal exhaust hangers
Dual staggered tip exhaust tips (integrated)
Installation and Support:
Installation is as easy as cutting, placing into position, and clamping!
Tools you might want for the job:
Exhaust hanger removal pliers - T379176
Exhaust pipe cutter - T385451
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
The combination of N52 and muffler delete surpasses all sound expectations from a small 1 series! Impressive direct-fit solution. With this new muffler/res delete you can completely transform the sound and driving experience of your 128. A simple installation that can be completed with hand tools gives you the ability to take your car to the next level at home in your garage! What sounds better than an in-line six-cylinder paired with a race-inspired exhaust setup, the answer is nothing. You have a nimble chassis fitted with an engine that provides more than enough power for spirited street driving or even taking to the track, if the exhaust is still factory you do not know what you are missing out on.
The ECS N52 Muffler & Resonator Delete removes the heavy, restrictive factory muffler and replaces it with a lighter weight, high flow, T304 stainless steel 3.0" exhaust tubing. This exhaust adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. This upgrade creates a noticeable increase in exhaust sound, without adding significant drone at cruising speeds. As an added bonus, the ECS muffler delete shaves off about 16 lbs, weighing in at only 22 lbs. OEM units out of the 128 weigh in at around 38lb, a difference you will fully notice when upgrading your exhaust.
Features and Benefits:
Replace the factory muffler and resonator for a race-inspired straight 6-cylinder sound
Large radius bends for maximum exhaust gas flow
16lb weight reduction (Factory 38lb, ECS 22lb)
Fits in the factory exhaust hanger locations
Installation instructions featuring locations for removing your factory exhaust
Design:
In-house designed and engineered rear Muffler & Resonator Delete is made of T304 stainless steel, 1.25mm wall thickness, CNC mandrel bent 3.0" tubing for straight-through exhaust gas routing
High-quality stainless steel
Barbed exhaust hangers tig welded into the factory location for direct fitment
Stainless steel accuseal exhaust clamps included for a leak-proof seal
Large radius bends throughout with smooth transitions for the best flow possible
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Our Signature Exhaust is often considered to be the most iconic, period-correct system available for your BMW E36. Extensive R&D, flawless design and superior construction are all reasons why our BMW E36 M3 Gen 3 Signature Exhaust is the number one choice for the E36 enthusiast today. This BMW exhaust is eye catching, built of 100% new Brushed Finish 304 stainless steel, sporting large 54mm twin inlet pipes, smooth mandrel bends, and dual 76mm tips with the Active Autowerke Logo embossed allow this BMW exhaust system to not only perform at a level above all other but also allow one to enjoy its beauty.
Engineering with the ease of install in mind this is a true bolt on system like no other. Performance gains are definite and satisfying, thanks to substantially higher flow rates over the stock system. The full Active Autowerke BMW E36 M3 Exhaust system weighs in at just 34lbs allowing for some much needed weight savings over the stock system. Emitting a F1 type sound when bolted onto a stock car with it's unique hexagon style muffler this system has become the benchmark by which all other E36 systems are judged. Pair it with our BMW Cold Air Intake for the best power gains!
Kit Features:
Fits the following vehicles:
1995-1998 E36 BMW 325i/is 328i/is M3
Transform the sound profile and driving dynamics of your BMW without replacing the entire exhaust system! Engineered specifically for the N20-equipped F3X platform, this direct-fit muffler delete delivers an aggressive, sporty tone you wouldn't expect from a 4-cylinder engine.
By eliminating the restrictive factory muffler and replacing it with a high-flow, straight-through exhaust pipe, this kit unlocks an incredible surge in volume and a sporty tone. Beyond the dramatic sound upgrade, this setup drastically improves performance efficiency through massive weight savings. The high-flow straight pipe removes 21 lbs from the rear of the vehicle, dropping the total axle-back exhaust weight down to just 7 lbs. Designed for quick at-home installation, it installs using basic garage hand tools and integrates perfectly with your OEM rear valance for a clean, OEM+ aesthetic.
The Active Autowerke BMW F22 228i signature exhaust is located in a class all of its own. This product is a must for any enthusiast searching for true performance, added durability and an attractive weight advantage when it comes to the F22 228i performance signature exhaust.
This system is constructed from 100% polished 304-stainless steel and features adjustable 80 mm double walled tips, making it ideal both for two-door and four-door models (which also allows for cleaner fitment with diffusers).
This BMW F22/F30 exhaust delivers everything we know you would want in a performance exhaust: eye-catching style, a sophisticated yet aggressive tone, weight savings, and – most importantly – measurable horsepower performance gains!
This muffler turns your 228i exhaust tone into a sporty but mellow tone that is not only exhilarating but non obtrusive on your ears.
The factory counterpart weighs 29 lbs. while the Active Autowerke Signature exhaust weighs only a mere 19 lbs. Weight savings are not the only attributes, this 228i performance exhaust has a modular design with its v-band clamps that makes fitment a snap. A revelation in BMW tuning.
On the in-house Active Autowerke Mustang dyno, their otherwise 100% stock 2013 228i test mule spun the rollers to the tune of an extra 9 RWHP, and 13 LB-FT of torque…from “just” a quality muffler upgrade.
Turbos love to exhale, and we are very anxious to continue to unearth just how much extra power is hiding in the stock exhaust system.
FEATURES:
NOTE:
Fits F22/30 BMW 228i and 228i models with the N20 engine.
The Active Autowerke BMW F30 328I signature exhaust is located in a class all of its own. This product is a must for any enthusiast searching for true performance, added durability and an attractive weight advantage when it comes to the F30 328I performance signature exhaust.
This system is constructed from 100% polished 304-stainless steel and features adjustable 80 mm double walled tips, making it ideal both for two-door and four-door models (which also allows for cleaner fitment with diffusers).
This BMW F30 exhaust delivers everything we know you would want in a performance exhaust: eye-catching style, a sophisticated yet aggressive tone, weight savings, and – most importantly – measurable horsepower performance gains!
This muffler turns your 328I exhaust tone into a sporty but mellow tone that is not only exhilarating but non obtrusive on your ears.
The factory counterpart weighs 29 lbs. while the Active Autowerke Signature exhaust weighs only a mere 19 lbs. Weight savings are not the only attributes, this 328I performance exhaust has a modular design with its v-band clamps that makes fitment a snap. A revelation in BMW tuning.
On the in-house Active Autowerke Mustang dyno, their otherwise 100% stock 2013 328I test mule spun the rollers to the tune of an extra 9 RWHP, and 13 LB-FT of torque…from “just” a quality muffler upgrade.
Turbos love to exhale, and we are very anxious to continue to unearth just how much extra power is hiding in the stock exhaust system.
FEATURES:
NOTE:
Fits F30 BMW 228i and 328i models with the N20 engine.
Lightweight axle-back featuring an exotic exhaust note. Designed for the perfect blend of performance and functionality!
Prepare to give your 1 series the boost it deserves. Our cat-back exhaust was made to redefine the driving experience of your 135. Manufactured from premium brushed stainless steel, it is not just about reducing weight; it's about enhancing performance with unrestricted airflow. And the sound? It's a symphony of power and precision, carefully crafted for an unforgettable soundtrack. The sound experience is more than you could ask for. With the freedom of exhaust- flow and tuned exhaust note, we are very excited to get these exhausts on 135's everywhere, don't wait!
Featured on the ECS Tuning YouTube Channel! - CLICK HERE FOR SOUND CLIPS! -
In crafting this exhaust system, the primary focus is on achieving the perfect balance of sound and comfort. We understand the desire for a thrilling exhaust note without the annoyance of highway drone or interior vibrations. The ECS exhaust for your 135 incorporates this balance, offering a strategic blend of sportiness and practicality. Drawing from extensive experience, particularly with N54 cars like the E9x series, ECS has engineered an exhaust packed with innovative features, compatible with both factory and aftermarket downpipes. Experience the perfect blend of performance and everyday usability.
Prepare for a fresh new exhaust, things are about to get rowdy. This exhaust features twin 2.5" brushed pipes that slip fit and clamp onto your factory midpipes. The dual 2.5" mid-pipe adapter converges into a single 3" section heading toward the rear axle. The 3" exhaust section snakes through the rear section of the car making smooth dips and curves to make its way into a light-weight 3" turbo style muffler. Don't be fooled by the 135 muffler, the size is nothing but deceiving. The turbo-style muffler features an inner design that refines the exhaust note to perfection. An extraordinary mixture of both volume and smooth frequency. Paired with the 3" muffler is your choice of 3.5" exhaust tips that give your rear diffuser a sporty look that shouts performance.
Features and Benefits:
Street/Motorsport inspiration
Enhanced exhaust note
Full exhaust replacement
36% lighter than stock!
Stock axle-back: 39lbs
ECS axle-back: 25lbs
Reduction in back pressure for increased throttle response, TQ, and HP
Dual 3.5" fitted exhaust tips
Part Design:
In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged, and TIG-welded throughout
Dual 2.5" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers TIG-Welded in OE locations for precise fitment.
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Kit Contents:
2.5" mid-pipe adapters
3" Rear exhaust section
3.0" free-flowing muffler section for better sound, and performance
Clamps and Hardware for an OEM+ install
Optional 3.5" ECS exhaust tips
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.