Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Our Signature Exhaust is often considered to be the most iconic, period-correct system available for your BMW E36. Extensive R&D, flawless design and superior construction are all reasons why our BMW E36 M3 Gen 3 Signature Exhaust is the number one choice for the E36 enthusiast today. This BMW exhaust is eye catching, built of 100% new Brushed Finish 304 stainless steel, sporting large 54mm twin inlet pipes, smooth mandrel bends, and dual 76mm tips with the Active Autowerke Logo embossed allow this BMW exhaust system to not only perform at a level above all other but also allow one to enjoy its beauty.
Engineering with the ease of install in mind this is a true bolt on system like no other. Performance gains are definite and satisfying, thanks to substantially higher flow rates over the stock system. The full Active Autowerke BMW E36 M3 Exhaust system weighs in at just 34lbs allowing for some much needed weight savings over the stock system. Emitting a F1 type sound when bolted onto a stock car with it's unique hexagon style muffler this system has become the benchmark by which all other E36 systems are judged. Pair it with our BMW Cold Air Intake for the best power gains!
Kit Features:
Fits the following vehicles:
1995-1998 E36 BMW 325i/is 328i/is M3
Rogue Engineering is proud to introduce their Z4 M Diablo exhaust. A cursory glance at the exhaust easily shows how this exhaust excels in both performance while saving weight. However, a closer look will show the pure artistry of its construction and elements of unique design.
Like the successful E46 M3 Diablo exhaust, the Z4 M Diablo exhaust is designed to compliment the high-revving engine concept which BMW has implemented into the M brand vehicles as of late. This means that the exhaust note will not only sound good at low RPMs, but also at the high RPM limit of the engine. Additionally, the Z4 M Diablo will improve performance at high RPMs with its straight-through muffler design.
Installation of the Z4 M Diablo requires no cutting or welding as it requires the removal of the factory rear mufflers. Installation time is approximately 45 minutes. No new gaskets or hardware is required.
The Active Autowerke BMW F22 228i signature exhaust is located in a class all of its own. This product is a must for any enthusiast searching for true performance, added durability and an attractive weight advantage when it comes to the F22 228i performance signature exhaust.
This system is constructed from 100% polished 304-stainless steel and features adjustable 80 mm double walled tips, making it ideal both for two-door and four-door models (which also allows for cleaner fitment with diffusers).
This BMW F22/F30 exhaust delivers everything we know you would want in a performance exhaust: eye-catching style, a sophisticated yet aggressive tone, weight savings, and – most importantly – measurable horsepower performance gains!
This muffler turns your 228i exhaust tone into a sporty but mellow tone that is not only exhilarating but non obtrusive on your ears.
The factory counterpart weighs 29 lbs. while the Active Autowerke Signature exhaust weighs only a mere 19 lbs. Weight savings are not the only attributes, this 228i performance exhaust has a modular design with its v-band clamps that makes fitment a snap. A revelation in BMW tuning.
On the in-house Active Autowerke Mustang dyno, their otherwise 100% stock 2013 228i test mule spun the rollers to the tune of an extra 9 RWHP, and 13 LB-FT of torque…from “just” a quality muffler upgrade.
Turbos love to exhale, and we are very anxious to continue to unearth just how much extra power is hiding in the stock exhaust system.
FEATURES:
NOTE:
Fits F22/30 BMW 228i and 228i models with the N20 engine.
The Active Autowerke BMW F30 328I signature exhaust is located in a class all of its own. This product is a must for any enthusiast searching for true performance, added durability and an attractive weight advantage when it comes to the F30 328I performance signature exhaust.
This system is constructed from 100% polished 304-stainless steel and features adjustable 80 mm double walled tips, making it ideal both for two-door and four-door models (which also allows for cleaner fitment with diffusers).
This BMW F30 exhaust delivers everything we know you would want in a performance exhaust: eye-catching style, a sophisticated yet aggressive tone, weight savings, and – most importantly – measurable horsepower performance gains!
This muffler turns your 328I exhaust tone into a sporty but mellow tone that is not only exhilarating but non obtrusive on your ears.
The factory counterpart weighs 29 lbs. while the Active Autowerke Signature exhaust weighs only a mere 19 lbs. Weight savings are not the only attributes, this 328I performance exhaust has a modular design with its v-band clamps that makes fitment a snap. A revelation in BMW tuning.
On the in-house Active Autowerke Mustang dyno, their otherwise 100% stock 2013 328I test mule spun the rollers to the tune of an extra 9 RWHP, and 13 LB-FT of torque…from “just” a quality muffler upgrade.
Turbos love to exhale, and we are very anxious to continue to unearth just how much extra power is hiding in the stock exhaust system.
FEATURES:
NOTE:
Fits F30 BMW 228i and 328i models with the N20 engine.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Engineered to deliver a great sound without unpleasant drone, this exhaust system offers easy installation and removal, ensuring a hassle-free upgrade experience.