BMW Axleback Exhaust

Arguably THE BEST modification for your B46/B48. This muffler delete sounds too good to be a 4 cylinder! The combination of B48 and muffler delete surpasses all sound expectations from a 4-cylinder! Impressive direct-fit solution. With this new muffler delete you can transform the sound and driving experience of your 330 or 430. A simple installation that can be completed with hand tools gives you the ability to take your car to the next level at home in your garage!

The ECS B48 muffler delete removes the heavy and restrictive factory exhaust muffler and replaces it with a high-flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, our muffler delete shaves off 21.0 lbs., weighing in at only 7.0lbs compared to the OEM muffler at 28.0lbs!

Features and benefits:

Enhanced exhaust tone
Simple installation (with instructions!)
21lb weight savings! (Factory muffler 28 lbs, muffler delete 7 lbs!)
Tip adjustment capability ​
Slide farther on for left and right adjustment
Rotate for verticle adjustment
Good looking and durable 304 stainless steel construction
Heavy-duty fabricated sheet metal exhaust hangers
Dual staggered tip exhaust tips (integrated)
Installation and Support:

Installation is as easy as cutting, placing into position, and clamping!
Tools you might want for the job:
Exhaust hanger removal pliers - T379176
Exhaust pipe cutter - T385451

The combination of N52 and muffler delete surpasses all sound expectations from a small 1 series! Impressive direct-fit solution. With this new muffler/res delete you can completely transform the sound and driving experience of your 128. A simple installation that can be completed with hand tools gives you the ability to take your car to the next level at home in your garage! What sounds better than an in-line six-cylinder paired with a race-inspired exhaust setup, the answer is nothing. You have a nimble chassis fitted with an engine that provides more than enough power for spirited street driving or even taking to the track, if the exhaust is still factory you do not know what you are missing out on.

The ECS N52 Muffler & Resonator Delete removes the heavy, restrictive factory muffler and replaces it with a lighter weight, high flow, T304 stainless steel 3.0" exhaust tubing. This exhaust adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. This upgrade creates a noticeable increase in exhaust sound, without adding significant drone at cruising speeds. As an added bonus, the ECS muffler delete shaves off about 16 lbs, weighing in at only 22 lbs. OEM units out of the 128 weigh in at around 38lb, a difference you will fully notice when upgrading your exhaust.

Features and Benefits:

Replace the factory muffler and resonator for a race-inspired straight 6-cylinder sound
Large radius bends for maximum exhaust gas flow
16lb weight reduction (Factory 38lb, ECS 22lb)
Fits in the factory exhaust hanger locations
Installation instructions featuring locations for removing your factory exhaust
Design:

In-house designed and engineered rear Muffler & Resonator Delete is made of T304 stainless steel, 1.25mm wall thickness, CNC mandrel bent 3.0" tubing for straight-through exhaust gas routing
High-quality stainless steel
Barbed exhaust hangers tig welded into the factory location for direct fitment
Stainless steel accuseal exhaust clamps included for a leak-proof seal
Large radius bends throughout with smooth transitions for the best flow possible

Transform the sound profile and driving dynamics of your BMW without replacing the entire exhaust system! Engineered specifically for the N20-equipped F3X platform, this direct-fit muffler delete delivers an aggressive, sporty tone you wouldn't expect from a 4-cylinder engine.

By eliminating the restrictive factory muffler and replacing it with a high-flow, straight-through exhaust pipe, this kit unlocks an incredible surge in volume and a sporty tone. Beyond the dramatic sound upgrade, this setup drastically improves performance efficiency through massive weight savings. The high-flow straight pipe removes 21 lbs from the rear of the vehicle, dropping the total axle-back exhaust weight down to just 7 lbs. Designed for quick at-home installation, it installs using basic garage hand tools and integrates perfectly with your OEM rear valance for a clean, OEM+ aesthetic.

Lightweight axle-back featuring an exotic exhaust note. Designed for minimal drone at driving speed and maximum volume when desired.

Prepare to give your 335 the boost it deserves. Our axle-back exhaust was made to redefine the driving experience of your E9x. Manufactured from premium brushed stainless steel, it is not just about reducing weight; it's about enhancing performance with unrestricted airflow. And the sound? It's a symphony of power and precision, carefully crafted for an unforgettable soundtrack. The sound experience is more than you could ask for. With the freedom of exhaust flow and tuned exhaust note, we are very excited to get these exhausts on 335's everywhere, don't wait!

In crafting the 335 exhaust systems, the primary focus is achieving the perfect balance of sound and comfort. We understand the desire for a thrilling exhaust note without the annoyance of highway drone or interior vibrations. This ECS exhaust for your 335 incorporates this balance, offering a strategic blend of sportiness and practicality. Drawing from their extensive experience, particularly with N54 and N55 E chassis, they have engineered an exhaust packed with innovative features, compatible with factory and aftermarket downpipes. Experience the perfect blend of performance and everyday usability.

Prepare for a fresh new exhaust, things are about to get rowdy. This ECS exhaust features twin 2.5" brushed pipes with flanges that bolt directly to your factory and aftermarket downpipes. The dual 2.5" mid-pipes make their way toward the rear axle with smooth transitions for effortless exhaust flow. Replacing the large suitcase muffler is a pair of 2.5" turbo-style mufflers that shed weight and give a signature sound. The turbo-style muffler features an inner design that refines the exhaust note to perfection. An extraordinary mixture of both volume and frequency. Paired with the 2.5" mufflers is your choice of 3.5" exhaust tips that give your rear diffuser a sporty look that shouts performance.

Features and Benefits:

Street/Motorsport inspiration
Enhanced exhaust note
33% lighter than stock!
Stock axle-back: 51lbs
ECS axle-back: 34lbs
Reduction in back pressure for increased throttle response, TQ, and HP
Dual 3.5" fitted exhaust tips
Part Design:

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged, and TIG-welded throughout
Dual 2.5" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers TIG-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Kit Contents:

Dual 2.5" rear section and adapters
2.5" free-flowing mufflers for better sound, and performance
Clamps and Hardware for an OEM+ install
Optional 3.5" ECS exhaust tips