Lock down front axle geometry on your G01/G02. These 95A polyurethane bushings feature a 300% rigidity increase, permanently neutralizing wheel migration and dynamic toe deflection under maximum braking forces.
Show More Show Less
Eliminate front anti-roll bar slop on your E46 M3. These 26mm Heritage polyurethane bushings maximize bar transition response while maintaining a discrete, factory-original dark grey appearance.
Manufactured using the same premium polyurethane as our street series, but in a dark grey color. These bushings improve any collector car, while retaining the same standard appearance of a rubber bushing.
Show More Show Less
If your front suspension is feeling sloppy on turn-in or unstable during heavy braking, dropping in these URO bushings will tighten up the handling and keep your alignment locked in where it belongs.
Eliminate sway bar deflection on your BMW. These 21.5mm Heritage polyurethane bushings maximize front bar transition response while maintaining a discrete, factory-original dark grey undercarriage layout.
Show More Show Less
Eliminate front sway bar deflection on your E46 or Z4M. These 27mm Heritage polyurethane bushings maximize roll rate efficiency while maintaining a discrete, factory-original dark grey finish.
Stabilize your E39 front geometry. These 59mm Heritage polyurethane bushings completely lock down thrust arm deflection to stop brake-induced alignment shifts while maintaining a discrete dark grey colorway.
Show More Show Less
Upgrade your classic BMW's front suspension without compromising its vintage look. These Powerflex Heritage bushings replace rotted factory control arm rubber with modern, slate-grey polyurethane—delivering tight, precise steering response with a completely stock appearance.
Show More Show Less
Eliminate front sway bar deflection on your E46/E39. These 23mm Heritage polyurethane bushings maximize bar transition response while maintaining a discrete, factory-original dark grey appearance.
Lock down classic BMW suspension geometry. This 95A durometer Black Series bushing eliminates front inner control arm deflection, providing track-validated steering communication and stable dynamic alignment.
Show More Show Less
Eliminate front sway bar slop. These 22.5mm Heritage polyurethane bushings maximize roll resistance while maintaining a discrete, factory-original dark grey appearance.
Lock down your 24mm front stabilizer bar. These Heritage Series polyurethane bushings eliminate dynamic deflection under lateral load while maintaining a discrete, factory-original dark grey finish.
Lock down your Mini's front suspension geometry. These high-durometer control arm bushings eliminate dynamic alignment drift, ensuring maximum front-axle bite and entirely predictable handling under aggressive track conditions.
Show More Show Less
Lock down your X5M/X6M front suspension geometry. These metal-shelled, 95A durometer polyurethane bushings increase rigidity by 25%, stopping thrust arm migration to maximize tire longevity and mid-corner stability.
Show More Show Less
Secure lower control arm stability on your classic E34/E32. These Heritage polyurethane bushings eliminate structural flex on steel arms, guaranteeing predictable track geometry and direct steering communication.
Show More Show Less
Lock down your E46 M3's front alignment geometry. These Heritage Series polyurethane bushings replace failure-prone factory rubber with high-stiffness, slate-grey poly to maximize front-axle communication with a discrete appearance.
Show More Show Less
Eliminating deflection at this specific suspension node is the single most effective way to eliminate wheel hop and preserve your baseline alignment under competitive racing loads. Professional alignment is highly recommended post-installation to re-verify front caster and toe settings
Show More Show Less
Eliminate dynamic alignment drift on your vintage BMW. These aluminum-arm specific Heritage polyurethane bushings minimize deflection under heavy loads while maintaining a discrete, factory-original dark grey appearance.
Show More Show Less
Secure your front suspension geometry. This hybrid alloy and polyurethane bushing increases wishbone rigidity by 128%, ensuring a rock-solid tire contact patch and track-validated front-axle bite.
Lock down your front axle geometry. This Black Series 60mm hybrid aluminum/polyurethane kit increases bushing stiffness by 190%, guaranteeing track-ready front-end control and eliminating alignment drift under threshold braking.
Show More Show Less
Force your sway bar to react instantly. These 95A durometer Black Series bushings remove all free-play from your 22.5mm front bar, stabilizing front-axle roll rates for track-level execution.
Lock down classic suspension geometry with zero aesthetic compromise. These Heritage Series polyurethane bushings stop front lower wishbone deflection while retaining an un-modified, dark grey factory appearance under the vehicle.
Show More Show Less
Eliminate front track arm deflection on your 6-cylinder BMW E39. These Heritage polyurethane bushings optimize steering translation while maintaining a discrete, factory-original dark grey appearance under the chassis
Show More Show Less
Lock down front suspension geometry and optimize your apex bite. These high-durometer polyurethane bushings offer $\pm 0.75^\circ$ of on-car camber adjustment to eliminate inner arm deflection and tire edge roll under heavy track loads.
Show More Show Less
This premium febi bilstein front left control arm bushing and bracket assembly provides an OE-quality refresh to keep your chassis behaving exactly as intended.
