This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your N52/N54 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install
If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.
Product Features:
Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:
Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Upgraded or replacement silicone heater hose for our N54 expansion tank relocation kits.
60" silicone performance coolant hose featuring a molded 90-degree bend for installs with space constraints.
Features and benefits:
Constructed of 4-Ply reinforced silicone for improved durability over the failure-prone rubber hoses.
Reduced thermal conductivity
Improved resistance to ozone and UV degradation for improved performance and durability.
Turner branded
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Replace the Achilles heel of your factory cooling system with a stout and reliable mechanical thermostat setup.
The factory E46 thermostat housing is a combined unit featuring a plastic housing and a built in thermostat that you cannot replace separately. These plastic all-in-one units are commonly know to crack or fail causing a headache, a trip on the tow truck and possible damage to your engine.
Taking cues from the reliable M50 thermostat setup we designed a an assembly that not only converts your plastic housing into a billet aluminum unit but also swaps out the integrated thermostat for a separate replaceable thermostat. The ability to swap out thermostats separately from the whole housing opens up doors to changing thermostats to different temperature ratings based on your application while also providing lower maintenance costs. No longer do you have to replace the whole housing but just the thermostat itself.
The billet housing is designed to be utilized with E46 M3 upper and lower radiator hoses and also features -16 ORB connections for custom radiator hoses. A major upgrade from the factory and aftermarket plastic units. Our thermostat housing kit can be used by the savvy daily driver or the track hero who wants to ensure the durability of their cooling system.
Key benefits:
Uses M50/S50 mechanical thermostat for increased reliability
Option to use aftermarket colder thermostats if desired
Thermostat can be replaced separately for lower maintenance cost
Barbed hose connections for use with E46 M3 hoses or built in -16 ORB connections for custom radiator hoses
Design:
Machined out of a single piece of billet 6061 aluminum, this thermostat housing will withstand higher prolonged temperatures and abuse for performance applications
Black anodized with engraved Turner logo on the front to match the Turner Motorsports Power Steering Reservoir
Viton gasket for superior sealing performance
For use with E46 M3 radiator hoses 11537830715 and 11537830716
Kit contents:
6061 Billet Aluminum Thermostat Housing
Mechanical Thermostat
Thermostat Housing Gasket
Thermostat Harness
Optional Silicone or Rubber E46 M3 coolant hoses
Product Development:
Our Billet Thermostat Housing upgrade was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Replace your factory, stamped aluminum radiator slam panel with a more lively gloss carbon fiber version for a look that sets your car apart from the rest.
Pop the hood! Say so long to the plain satin black radiator cover, our Turner carbon fiber engine cover looks so good along with the S58 and can transform the appearance of your engine bay in just minutes. One of the first things you do with a new car is take care of all the simple modifications to get the best out car without taking it apart. Remove your factory radiator slam panel and replace it with your new carbon fiber cover to check one modification off the list! Be the one who stands out from the other S58-equipped cars with their hoods open.
Our Turner Carbon radiator cover starts with a mold of the original component to get the best factory-form fitment possible. The cover is made from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. Be sure to check out the other incredible carbon fiber pieces Turner offers to enhance your G chassis!
Upgrade your cooling system setup with our Heavy Duty Radiator Mounting Brackets, engineered to deliver maximum structural support and a refined engine-bay aesthetic. After decades of heat cycles and hard driving, your E30's factory plastic mounts inevitably become brittle, faded, and prone to cracking, risking damage to your radiator. Our radiator mount upgrade completely replaces those tired OEM units with a high-strength alternative built to handle the rigors of spirited driving, track days, and engine swaps. Whether you are performing a full cooling system refresh or executing an M5X swap that utilizes an E36-style radiator, these brackets provide the ideal balance of precision fitment and rugged dependability.
Crafted with a premium brushed stainless steel finish, this kit does more than secure your radiator; it radically improves the visual appeal under the hood by swapping out cheap, weathered plastic for durable steel hardware. Designed as a true direct bolt-on solution, the brackets align seamlessly with factory mounting locations, eliminating the need for frustrating custom fabrication, cutting, or drilling. They clamp down firmly to eliminate unwanted radiator movement, ensuring your cooling stack remains locked in place under heavy vibration.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The coolant expansion tank provides hot coolant with a place to travel, preventing pressure buildup within your cooling system. On many BMWs, this component is constructed from plastic. While cheap to replace and manufacture, a failed cooling tank can cause costly engine damage.
With this issue in mind, Moroso designed a high-quality replacement. Featuring TIG welded, 100% aluminum construction, this tank is sure to outperform it's factory counterpart.
Features:
Key Benefits:
Direct bolt-in replacement for stock, 2 piece plastic tank Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations & age Features billet aluminum mounting tab/bleeder assembly for strength and precision No cutting of factory hoses is required and accepts the factory clip-on hose Moroso part (63324) racing radiator cap included; operates in the same pressure range as the factory cap Moroso radiator cap mounts to a billet aluminum neck that will not strip out like plastic threaded necks This aluminum tank can be polished, chromed, powder coated or left as-is
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The coolant expansion tank provides hot coolant with a place to travel, preventing pressure buildup within your cooling system. On many BMWs, this component is constructed from plastic. While cheap to replace and manufacture, a failed cooling tank can cause costly engine damage.
With this issue in mind, Moroso designed a high-quality replacement. Featuring TIG welded, 100% aluminum construction, this tank is sure to outperform it's factory counterpart.
Features:
Bolt-in replacement for stock cracked or discolored tanks Fabricated aluminum Features billet aluminum filler neck and integrated sight glass to monitor coolant level Can be polished, painted, powder coated or left as-is Moroso radiator cap (63320) included
This product was last offered at the strikethrough price on
08-07-2026
This product was last offered at the strikethrough price on
08-07-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Upgrade your Gen1 Mini Cooper or Cooper S with the coolant expansion/fill tank featuring a billet radiator-style neck. This tank accepts the Canton Racing part #81-030 pressure cap or any 30 psi radiator-style cap. The Canton Racing Aluminum tank with Powdercoated Wrinkle Black finish not only enhances the engine bay aesthetics but also resolves expansion tank issues with its solid build and built-in mount. Say goodbye to concerns about separating and leaking plastic expansion tanks. Pair it with the Canton Racing 77-272 MINI power steering tank for a perfect combination.
MINI R50 to R53 Expansion Tank / Power Steering Tank - Wrinkle Black Aluminum is a high-quality solution designed to address both coolant expansion and power steering needs in one kit. This kit includes a billet-style expansion tank with a radiator neck that accepts the Canton Racing part #81-030 pressure cap or any 30 psi radiator cap, ensuring a secure and leak-proof seal.
Key benefits of the MINI R50 to R53 Expansion Tank / Power Steering Tank - Wrinkle Black Aluminum include:
MINI R50 to R53 Expansion Tank Aluminum Wrinkle Black & Cap - Kit offers the premium quality of Canton Racing for MINI enthusiasts. This high-grade aluminum expansion tank features a sleek Wrinkle Black powder-coated finish, designed to replace the original plastic tank with ease.
The coolant expansion tank provides hot coolant with a place to travel, preventing pressure buildup within your cooling system. On many BMWs, this component is constructed from plastic. While cheap to replace and manufacture, a failed cooling tank can cause costly engine damage.
With this issue in mind, Moroso designed a high-quality replacement. Featuring TIG welded, 100% aluminum construction, this tank is sure to outperform it's factory counterpart.
Features:
Key Benefits:
Direct bolt-in replacement for stock, 2 piece plastic tank Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations & age Features billet aluminum mounting tab/bleeder assembly for strength and precision No cutting of factory hoses is required and accepts the factory clip-on hose Included is a Moroso (63324) racing radiator cap that operates in the same pressure range as the factory cap Moroso radiator cap mounts to a billet aluminum neck that will not strip out like plastic threaded necks Can be polished, chromed, or powder coated or left as-is
