Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your N52/N54 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install
If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.
Product Features:
Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:
Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Upgraded or replacement silicone heater hose for our N54 expansion tank relocation kits.
60" silicone performance coolant hose featuring a molded 90-degree bend for installs with space constraints.
Features and benefits:
Constructed of 4-Ply reinforced silicone for improved durability over the failure-prone rubber hoses.
Reduced thermal conductivity
Improved resistance to ozone and UV degradation for improved performance and durability.
Turner branded
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Replace the Achilles heel of your factory cooling system with a stout and reliable mechanical thermostat setup.
The factory E46 thermostat housing is a combined unit featuring a plastic housing and a built in thermostat that you cannot replace separately. These plastic all-in-one units are commonly know to crack or fail causing a headache, a trip on the tow truck and possible damage to your engine.
Taking cues from the reliable M50 thermostat setup we designed a an assembly that not only converts your plastic housing into a billet aluminum unit but also swaps out the integrated thermostat for a separate replaceable thermostat. The ability to swap out thermostats separately from the whole housing opens up doors to changing thermostats to different temperature ratings based on your application while also providing lower maintenance costs. No longer do you have to replace the whole housing but just the thermostat itself.
The billet housing is designed to be utilized with E46 M3 upper and lower radiator hoses and also features -16 ORB connections for custom radiator hoses. A major upgrade from the factory and aftermarket plastic units. Our thermostat housing kit can be used by the savvy daily driver or the track hero who wants to ensure the durability of their cooling system.
Key benefits:
Uses M50/S50 mechanical thermostat for increased reliability
Option to use aftermarket colder thermostats if desired
Thermostat can be replaced separately for lower maintenance cost
Barbed hose connections for use with E46 M3 hoses or built in -16 ORB connections for custom radiator hoses
Design:
Machined out of a single piece of billet 6061 aluminum, this thermostat housing will withstand higher prolonged temperatures and abuse for performance applications
Black anodized with engraved Turner logo on the front to match the Turner Motorsports Power Steering Reservoir
Viton gasket for superior sealing performance
For use with E46 M3 radiator hoses 11537830715 and 11537830716
Kit contents:
6061 Billet Aluminum Thermostat Housing
Mechanical Thermostat
Thermostat Housing Gasket
Thermostat Harness
Optional Silicone or Rubber E46 M3 coolant hoses
Product Development:
Our Billet Thermostat Housing upgrade was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Replace your factory, stamped aluminum radiator slam panel with a more lively gloss carbon fiber version for a look that sets your car apart from the rest.
Pop the hood! Say so long to the plain satin black radiator cover, our Turner carbon fiber engine cover looks so good along with the S58 and can transform the appearance of your engine bay in just minutes. One of the first things you do with a new car is take care of all the simple modifications to get the best out car without taking it apart. Remove your factory radiator slam panel and replace it with your new carbon fiber cover to check one modification off the list! Be the one who stands out from the other S58-equipped cars with their hoods open.
Our Turner Carbon radiator cover starts with a mold of the original component to get the best factory-form fitment possible. The cover is made from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. Be sure to check out the other incredible carbon fiber pieces Turner offers to enhance your G chassis!
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
07-15-2026
This product was last offered at the strikethrough price on
07-15-2026
This product was last offered at the strikethrough price on
07-13-2026
This product was last offered at the strikethrough price on
07-13-2026
This product was last offered at the strikethrough price on
05-14-2026
This product was last offered at the strikethrough price on
05-14-2026
This product was last offered at the strikethrough price on
05-26-2026
This product was last offered at the strikethrough price on
05-26-2026