Find Parts That Fit Your Vehicle

BMW Cooling System Parts & Accessories

The cooling system is arguably the weakest point in numerous BMWs. If you drive an aging BMW or plan on taking your car to the track like we do, we recommend beefing up your cooling system before going to the track. Generally, the main components in your cooling system that are prone to failure include the following: expansion tank, factory hoses, water pump, thermostat, fan (especially if your vehicle comes factory with a clutch fan), and radiator. Factory BMW expansion tanks are plastic and prone to either breaking off at connection points or combusting. As factory rubber hoses age they either crack or break over time - we offer silicone cooling hose upgrades for most applications to avoid future failures. If you have an older vehicle, your water pump likely comes from the factory with a plastic impeller - we offer upgraded water pumps with metal impellers that are far more reliable. Newer model BMWs utilize electric water pumps - BMW spent millions of dollars engineering these water pumps, but they fail so often that we recommend replacing at 60,000 mile service intervals to avoid being stranded on the side of the road. In terms of thermostats, we offer various upgraded thermostats for racing applications. If your BMW utilizes a clutch fan from the factory, we have several options available in terms of universal electric fans - we recommend replacing these to avoid sending brittle plastic fan blades through your hood. For radiators, we recommend swapping out your radiator for one that does not use plastic connection points like your factory radiator.

Sub-Categories

Sort By:

Advanced Auto Fabrication - Corporate Logo
T#:7624632
Part#: 116211.2
In Stock
$ 85.00 USD
Free Shipping
$ 85.00 USD
Free Shipping

BMW E46 M54 AAF Low Temp Thermostat Kit - Partial is an essential upgrade for enthusiasts looking to optimize engine performance and reliability. Developed by Advanced Auto Fabrication (AAF), this kit addresses the limitations of the factory M54 thermostat, which maintains a temperature range of 80-103°C and opens the mechanical failsafe at 110°C. For race conditions where maintaining a lower temperature is crucial, this kit replaces the stock electronic thermostat with a manual unit, allowing the engine to run at a safer and more efficient temperature. This upgrade not only enhances engine longevity but also reduces stress from high-temperature operation, minimizes heat soak, and increases power.

  • Optimal Temperature Control: Replaces the factory thermostat for improved engine temperature management.
  • Enhanced Engine Longevity: Operates at safer temperatures, reducing stress and extending engine life.
  • Increased Power: Lower operating temperatures can lead to better engine performance.
  • Reduced Heat Soak: Helps prevent overheating and ensures efficient cooling.
  • Improved Reliability: Manual thermostat unit offers more consistent performance in racing conditions.

Partial Kit Contents:

  • Thermostat housing plate
  • Thermostat
  • Installation hardware
Show More Show Less
AAF Transmission Crossmembers 5-Speed - E46 Non-M
Fits ZF and Getrag Transmissions. Non-M models Only
Advanced Auto Fabrication - Corporate Logo
T#:7608860
Part#: 116110
In Stock at Vendor
$ 190.00 USD
Free Shipping
$ 190.00 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Ideal for the SE46 racing series, the AAF E46 5-speed Transmission Crossmember is a heavy-duty and worthwhile upgrade. The OEM thin cast aluminum cross member has been known to fail in multiple different ways. When using stiff engine and transmission mounts, the cross member can crack out and break around these mounting points. The cross member can also break from the high amounts of load transferred through the drive train. While chassis flex from hard cornering is being applied through the engine and transmission from the front cross member, this load is sent from the transmission back into the chassis at the transmission cross member. This is simply too much stress for the OEM cross member to hold up to under the extreme punishment of road racing. The AAF E46 Transmission Cross Member is completely constructed of 1/4' thick heavy-duty aluminum plate. It is designed specifically to cope with hours of endurance racing.
Show More Show Less
Active Autowerke - Corporate Logo
T#:397222
Part#: 14-009
Ships in 10 Business Days
$ 56.99 USD
Free Shipping on orders $49 and up
Plastic thermostat housing cracked on your M50?

Here are your choices: you can wait for the plastic factory thermostat housing cover to break and cause major overheating. (Even with a new stock cover, it won’t take long.) Or you can install a thoughtfully engineered all-aluminum thermostat housing cover from Active Autowerke and never experience this type of failure again. Currently there is no factory upgraded part to this problem. This is an aluminum extruded part that has all of the openings machine properly to fit like factory; from the mounting bolt holes, the seating of the thermostat to the sealing opening for the ORANGE gasket. Forged to exact factory tolerances, everything fits and this unit is a true easy bolt-on – especially suited for racing or load conditions like heavy traffic, where engine temp can rise rapidly. The housing is guaranteed never to break from overheating or over-tightening, and its CNC machined surface ensures a precise seat.

Unit comes complete with a new ORANGE sealing gasket; a new thermostat is recommended but not included.
For hotter climates, a 71 degree thermostat is recommended over the 82 degree unit.

Anything and everything BMW is the mantra at Active Autowerke. Since 1981 they have been serving the BMW community with custom turbocharger kits to a myriad of other innovative and inspiring performance parts.
Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7624630
Part#: 116211
In Stock
$ 175.00 USD
Free Shipping
$ 175.00 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. The factory M54 thermostat is electronically controlled to keep the engine running between 80-103°C, whereas race cars like to maintain 80°C or less for maximum power. Additionally, the mechanical failsafe doesn’t open up until the coolant temperature reaches 110°C, or 230°F, which is about the point when most race cars are turned off and parked which is no good for the motor! The AAF E46 M54 Low Temp Thermostat Kit is designed to give the control of proper engine operating temperature back by replacing the stock electronic thermostat with a manual unit. This allows the engine to run at the proper, and much safer, operating temperature, improving engine longevity, reduces stress from high-temp. operation, reduces heat soak, and increases power! Full Kit Contents: Thermostat housing Thermostat housing plate Thermostat install hardware sealant
Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7608839
Part#: 11641
In Stock at Vendor
$ 189.00 USD
Free Shipping on orders $49 and up

BMW E46 AAF Aluminum Radiator Mounting Kit provides a robust solution for mounting an aluminum radiator into the BMW E46 chassis without relying on the stock plastic mounts. Developed by Advanced Auto Fabrication, a company renowned for their expertise in producing high-performance race car components, this kit reflects their extensive knowledge and dedication to BMW race car design.

The mounting kit is designed to replace the stock mounting system and is compatible with lightweight aftermarket fans, as the stock electric fan cannot be used. Please note that this kit does not fit M3 models.

  • Durable Construction: Made from high-quality aluminum for strength and longevity.
  • Enhanced Cooling Efficiency: Allows for the use of aftermarket fans for improved cooling performance.
  • Race-Ready Design: Reflects Advanced Auto Fabrication's expertise in BMW race car components.
  • No Stock Plastic Mounts: Provides a more reliable and robust mounting solution than the factory system.
Show More Show Less
Active Autowerke - Corporate Logo
T#:397219
Part#: 14-010
Ships in 1 Business Day
5% off MSRP $ 259.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 246.99 USD
Free Shipping
5% off MSRP
$ 259.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 246.99 USD
Free Shipping

When you push your powerplant, thermodynamics push right back. The toll of high performance is higher heat load – and many stock components begin to complain. But Active Autowerke has you covered - this upgraded fan clutch increases viscous coupling of cooling fan blade speed to water pump speed, yielding increased airflow through the radiator for more efficient cooling. A simple, yet wonderful, thing.

This product fits the following BMWs:
1992-1999 E36 323i 325i 328i 330i M3
1998-2006 E46 323i 325i 328i 330i M3

Show More Show Less

Genuine BMW M Performance - Corporate Logo
T#:22536
Part#: 17127602294
Ships in 1-2 days
10% off MSRP $ 194.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 175.99 USD
Free Shipping
10% off MSRP
$ 194.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 175.99 USD
Free Shipping


Genuine BMW Hose From Radiator Bottom - Thermostat
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E92,E93

Fits BMW Engines including:
N54T

Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971051
Part#: BM-0032
In Stock
$ 64.99

This product was last offered at the strikethrough price on
09-16-2026

$ 57.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 64.99

This product was last offered at the strikethrough price on
09-16-2026

$ 57.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.

AUTOTECKNIC - Corporate Logo
T#:14386749
Part#: BM-0004-M340I
Ships in 7 Business Days
$ 395.00 USD
Free Shipping on orders $49 and up
The AutoTecknic Dry Carbon Cooling Plate will provide your car with better air induction, providing the intake and engine with cooler air during high-speed driving; some customers have even reported better gas mileage and power gains.
Show More Show Less

AAF E46 Transmission Crossmembers - 6-Speed Non-M
For use with solid front engine mounts only!
Advanced Auto Fabrication - Corporate Logo
T#:7624639
Part#: 116222
In Stock
$ 190.00 USD
Free Shipping
$ 190.00 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Ideal for the SE46 racing series, the AAF E46 6-speed Transmission Crossmember is a heavy-duty and worthwhile upgrade. The OEM thin cast aluminum cross member has been known to fail in multiple different ways. When using stiff engine and transmission mounts, the cross member can crack out and break around these mounting points. The cross member can also break from the high amounts of load transferred through the drive train. While chassis flex from hard cornering is being applied through the engine and transmission from the front cross member, this load is sent from the transmission back into the chassis at the transmission cross member. This is simply too much stress for the OEM cross member to hold up to under the extreme punishment of road racing. The AAF E46 Transmission Cross Member is completely constructed of 1/4' thick heavy-duty aluminum plate. It is designed specifically to cope with hours of endurance racing.
Show More Show Less
Genuine BMW M Performance - Corporate Logo
T#:46042
Part#: 17117602241
Ships in 1-2 days
3% off MSRP $ 234.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 226.99 USD
Free Shipping
3% off MSRP
$ 234.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 226.99 USD
Free Shipping

This radiator aids in the cooling of you N54 engine which is know for running on the hot side. This is perfect for cars that see track time and spirited driving.


Genuine BMW Left Radiator
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E92,E93

Fits BMW Engines including:
N54

 

Show More Show Less
Advanced Auto Fabrication - Corporate Logo
T#:7624640
Part#: 116223
Ships in 4 Business Days
$ 190.00 USD
Free Shipping
$ 190.00 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Ideal for the SE46 racing series, the AAF E46 6-speed Transmission Crossmember is a heavy-duty and worthwhile upgrade. The OEM thin cast aluminum cross member has been known to fail in multiple different ways. When using stiff engine and transmission mounts, the cross member can crack out and break around these mounting points. The cross member can also break from the high amounts of load transferred through the drive train. While chassis flex from hard cornering is being applied through the engine and transmission from the front cross member, this load is sent from the transmission back into the chassis at the transmission cross member. This is simply too much stress for the OEM cross member to hold up to under the extreme punishment of road racing. The AAF E46 Transmission Cross Member is completely constructed of 1/4' thick heavy-duty aluminum plate. It is designed specifically to cope with hours of endurance racing.
Show More Show Less


AUTOTECKNIC - Corporate Logo
T#:21045537
Part#: ATK-BM-0701-G87
Ships in 7 Business Days
$ 550.00 USD
$ 550.00 USD
AutoTecknic's Dry Carbon Cooling Plate provides the G87 with better air induction while providing the intake and engine with cooler air during high-speed driving. It also gives your engine bay a fresh appearance. This shroud is made from high quality dry carbon fiber and is sure to stand the test of time!
Show More Show Less
Advanced Auto Fabrication - Corporate Logo
T#:7624641
Part#: 116251
In Stock at Vendor
$ 140.00 USD
$ 140.00 USD
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF has created a light-weight fan shroud for your E46 race car. Equipped with 7 flaps to let as much air through as possible at speed and fits a 14' fan. Seamlessly attaches to the AAF Radiator Mounts. The shroud creates a vacuum to expand the fan’s ability to pull from the entire surface area of the radiator. This creates cooler temps under the hood with the benefit of 7 flaps that allow the most air to pass through. **AAF states fitment has only been thoroughly tested with their radiator mounts. No fitment info for the stock plastic mounts is available at this time. AAF has created a light-weight fan shroud for your E46 race car. Equipped with 7 flaps to let as much air through as possible at speed and fits a 14' fan. Seamlessly attaches to the AAF Radiator Mounts. The shroud creates a vacuum to expand the fan’s ability to pull from the entire surface area of the radiator. This creates cooler temps under the hood with the benefit of 7 flaps that allow the most air to pass through. **AAF states fitment has only been thoroughly tested with their radiator mounts. No fitment info for the stock plastic mounts is available at this time. *Does not include fan.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:14386750
Part#: BM-0004-M440I
Ships in 7 Business Days
$ 395.00 USD
Free Shipping on orders $49 and up
The AutoTecknic Dry Carbon Cooling Plate will provide your car with better air induction, providing the intake and engine with cooler air during high-speed driving; some customers have even reported better gas mileage and power gains.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:21176932
Part#: ATK-BM-0004-M440
Ships in 7 Business Days
$ 295.00 USD
$ 295.00 USD
Quench your carbon thirst! AutoTecknic's Dry Carbon Cooling Plate provides the G87 with better air induction while providing the intake and engine with cooler air during high-speed driving. It also gives your engine bay a fresh appearance. Made from dry carbon this shroud is durable and can stand strong in any driving environment. Dry carbon is the highest-quality version of carbon fiber products that are produced. Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Some customers have even reported better gas mileage and power gains. This is a no-brainer! get yours today!
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:14386739
Part#: BM-0004-230I
Ships in 7 Business Days
$ 295.00 USD
$ 295.00 USD
The AutoTecknic Dry Carbon Cooling Plate will provide your car with better air induction, providing the intake and engine with cooler air during high-speed driving; some customers have even reported better gas mileage and power gains.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39497988
Part#: BM-0807
Ships in 7 Business Days
$ 595.00 USD
$ 595.00 USD
Turner Motorsport offers the AutoTecknic Dry Carbon Fiber Cooling Shroud for the F97 X3M and F98 X4M, providing BMW owners with an advanced cooling solution that enhances both function and style. Whether for spirited driving or track use, this high-performance carbon fiber cooling shroud ensures an optimized engine bay while complementing the aggressive styling of BMW M models.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39497957
Part#: BM-0701-M
Ships in 7 Business Days
$ 549.99 USD
Free Shipping on orders $49 and up
Turner Motorsport offers this premium AutoTecknic Dry Carbon Fiber Cooling Shroud, ensuring BMW enthusiasts get a top-quality upgrade for their vehicle. Whether for daily driving or intense track days, this cooling shroud is engineered to deliver maximum efficiency and an unmistakable carbon fiber style.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39497984
Part#: BM-0803-GC
In Stock
$ 74.99 USD
Free Shipping on orders $49 and up
Turner Motorsport offers the AutoTecknic Dry Carbon Coolant Expansion Tank Cap Cover - Gloss Carbon as the perfect addition for BMW owners looking to elevate their engine bay’s appearance with premium materials and precision engineering.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:21078397
Part#: ATK-BM-0004-M240
Ships in 7 Business Days
$ 395.00 USD
$ 395.00 USD
AutoTecknic's Dry Carbon Cooling Plate provides the G87 with better air induction while providing the intake and engine with cooler air during high-speed driving. It also gives your engine bay a fresh appearance.
Show More Show Less

Active Autowerke - Corporate Logo
T#:2302749
Part#: 14-016
Ships in 10 Business Days
$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
CNC machined coolant/water thermostat bypass tube to improve flow on and off the track. Easy plug and play installation and a durable anodized coating make this a simple and reliable temperature control solution.
Show More Show Less
Zionsville Autosport - Corporate Logo
T#:55533523
Part#: RAD-17-SHR
Ships on Nov 3, 2026
New Item
$ 505.00 USD
$ 505.00 USD
AUTOTECKNIC - Corporate Logo
T#:14419861
Part#: BM-0701
Special Order: No Guaranteed ETA
$ 550.00 USD
$ 550.00 USD
The AutoTecknic Dry Carbon Cooling shroud will provide your car with better air induction, providing the intake and engine with cooler air during high-speed driving; some customers have even reported better gas mileage and power gains.
Show More Show Less


AUTOTECKNIC - Corporate Logo
T#:14386748
Part#: BM-0004-M240I
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
The AutoTecknic Dry Carbon Cooling Plate will provide your car with better air induction, providing the intake and engine with cooler air during high-speed driving; some customers have even reported better gas mileage and power gains.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:14386746
Part#: BM-0004-430I
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
The AutoTecknic Dry Carbon Cooling Plate will provide your car with better air induction, providing the intake and engine with cooler air during high-speed driving; some customers have even reported better gas mileage and power gains.
Show More Show Less
Active Autowerke - Corporate Logo
T#:5886968
Part#: 15-012
Ships in 3 Business Days
$ 2,849.99 USD
Free Shipping
$ 2,849.99 USD
Free Shipping
BMW's S55 motor is a modern marvel but one weak point, which Active identified is the entire cooling system for the intake which comprises the charge pipe, the aftercooler and the heat exchanger (or radiator). Finally there is a S55 aftercooler kit upgrade that is good enough to carry the Active Autowerke brand. Years of success in developing cars for motorsport has allowed Active to leverage its expertise to the top-mount charge air cooler on the F80 M3, F82 M4 and F87 M2 Competition. This aftercooler was made for the S55 and crafted using only high-grade aluminum to outperform the factory aftercooler in all situations from everyday driving to the toughest racing. The factory cooler was built to support a specific power target and environment. Many of you have increased the performance of the S55 which quickly overwhelms the stock cooler leading to heat soak and higher intake air temperatures which triggers the ECU to downgrade the performance until cooler air returns. Active's focus was not on a mass-market aesthetic add-on but a properly engineered improvement over the existing hardware. Active uses a tube-and-fin core designed specifically for the S55 and included turbulators to maximize the cooling efficiency in as small a package as possible. The end tanks are billet machined aluminum, not cast, folded, or bonded and ensure even distribution of the water throughout the internal aftercooler cores. High precision fittings, CNC machining, and TIG welding throughout ensures the highest quality construction to prevent pressure loss, and the lowest weight, in a bolt-on replacement. But Active also didn’t leave the aesthetics by the wayside as we dip the visible top of the aftercooler in a carbon fiber coating giving your installed cooling system a decidedly top market look to match the improved cooling performance. The Active silicone charge pipes for the F80 M3, F82/F83 M4 and the F87 M2 Competition improve the flow over the stock, compressed plastic pipes. The Active Silicone Charge Pipes allow you to maximize power on your F8X by securing all the boost that your S55 is making. These pipes replace the hot-side pipes leaving the turbos and into the top-mount aftercooler. The stock S55 charge pipes are notorious for developing hairline fractures at their plastic seams. These fractures or cracks are unnoticeable to the naked eye, but under boost pressure they open up leaking the desired charged air into the engine bay, and consequently can rob your S55 of it's full power potential. In addition, these leaks can trigger your S55's turbochargers to work harder to hit and maintain target boost pressure, potentially wearing them out sooner. Active uses silicone in this area because it will not contribute to heat soak and it's easier to mold for the correct clearances. Active uses a 5-layer silicone hose with all needed adapters and stainless hose clamps included. It fits perfectly with our CNC’d top-mount cooler.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:21078422
Part#: ATK-TO-0007
Ships in 7 Business Days
$ 495.00 USD
Free Shipping on orders $49 and up
AutoTecknic's Dry Carbon Cooling Plate provides the A90 with better air induction while providing the intake and engine with cooler air during high-speed driving. It also gives your engine bay a fresh appearance. Set your Supra apart from the rest! Treat your car to some better breathing and a sportier look!
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39126836
Part#: BM-0325
Ships in 7 Business Days
$ 595.00 USD
Free Shipping on orders $49 and up
The AutoTecknic Dry Carbon Fiber Cooling Shroud for enhanced cooling efficiency and a race-inspired look.
AUTOTECKNIC - Corporate Logo
T#:14386744
Part#: BM-0004-330I
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
The AutoTecknic Dry Carbon Cooling Plate will provide your car with better air induction, providing the intake and engine with cooler air during high-speed driving; some customers have even reported better gas mileage and power gains.
Show More Show Less

Genuine BMW M Performance - Corporate Logo
T#:5214
Part#: 11122157665
Ships in 6 Business Days
2% off MSRP $ 1,880.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,846.99 USD
2% off MSRP
$ 1,880.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,846.99 USD

The N54 engine is prone to running hot. If you want to track your BMW, we highly recommend upgrading your cooling system. One great option is this BMW M Performance Cooling Kit for your 135i and 335i/xi. This kit includes a new fan and fan shroud, new cooling hoses, and an additional coolant radiator for increased cooling! Also included are all the necessary components for installation .

BMW Performance Power Kit
Fits BMW Engines including:
N54
 

Show More Show Less
Genuine BMW M Performance - Corporate Logo
T#:6106387
Part#: 17108342846KT
Back Ordered
$ 7,004.99 USD
$ 7,004.99 USD
This kit upgrades your M2 Competition cooling system to the one found in the M2 CS. This means larger auxiliary radiators and a more efficient cooling fan. Perfect for both street and track applications. This kit is also perfect for M2CS owners with any damaged components The kit comes with all pieces necessary for installation. No modification tot he body is required but the front bumper and headlights must be removed to install all components. Upgrade your M2 today with this direct fit kit offered through Turner Motorsport! Features: Front auxiliary radiators left and right with brackets New more powerful cooling fan (1000w vs 850w)
Show More Show Less