Find Parts That Fit Your Vehicle

Steering

Your BMW's steering feel is likely one of the many reasons you chose to drive a BMW. Despite them switching to electronic power steering after E9x, we love the connection to the road every BMW provides. We have everything you need to service your BMW's steering system, from quicker ratio steering racks for the trackday warrior to upgraded factory steering wheels for your daily driver.

Sub-Categories

Sort By:

ECS - Corporate Logo
T#:363383
Part#: 003042ECS01
In Stock
Sale - Save 15% $ 86.99

This product was last offered at the strikethrough price on
05-02-2026

$ 73.94 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 86.99

This product was last offered at the strikethrough price on
05-02-2026

$ 73.94 USD
Free Shipping on orders $49 and up
Most of the pulleys on your BMW engine are plastic, which become brittle and frail over time and from engine bay heat. A failed pulley could leave you stranded which is why it is vital to inspect the pulleys during routine maintenance. This is a stylized aluminum version of the stock power steering pulley used on M52, M52tu, and M54 engines. It's the same size and uses the same hardware and the original belt as the stock plastic pulley but the aluminum will last much longer.
Show More Show Less
ECS - Corporate Logo
T#:4455954
Part#: 016655LA01
In Stock
Sale - Save 17% $ 503.99

This product was last offered at the strikethrough price on
05-03-2026

$ 416.67 USD
Free Shipping
Sale - Save 17%
$ 503.99

This product was last offered at the strikethrough price on
05-03-2026

$ 416.67 USD
Free Shipping
This 2x2 twill carbon fiber steering wheel offers an ergonomic grip design and features perforated leather, carbon fiber, tri-color stitching for a beautiful and functional replacement wheel!
ECS - Corporate Logo
T#:39734492
Part#: 056549LA01
In Stock
Sale - Save 25% $ 32.99

This product was last offered at the strikethrough price on
06-14-2026

$ 24.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 32.99

This product was last offered at the strikethrough price on
06-14-2026

$ 24.74 USD
Free Shipping on orders $49 and up

ECS Tuning Steering Rack Spacers – A Simple Upgrade for More Angle

Whether you're just beginning your drift journey or looking to refine your current angle kit, ECS Tuning's Steering Rack Spacers offer a simple yet effective solution. Installation is straightforward—just remove the inner tie rods and place the spacers with the chamfered side facing the tie rod for an instant angle boost.

During the development of their ECS E90 drift build, the team at ECS Tuning was eager to hit the track and start testing. On the first day of driving, it quickly became apparent that two essential upgrades were needed: a welded differential (which led to the creation of their custom-fit differential plates – (T#:35121162) and increased steering angle. However, rather than jumping straight into a full-angle kit, ECS focused on incremental improvements to fine-tune the car’s handling.

ECS engineers, including a beginner drifter, carefully measured and tested different spacer sizes to optimize angle while maintaining proper thread engagement on the inner tie rod. After extensive testing, they determined that 5mm was the sweet spot—providing the extra angle needed while ensuring a strong and secure connection.

For those looking to enhance their drift setup without committing to an expensive angle kit, ECS Steering Rack Spacers offer an affordable and effective solution.

Key Benefits:

Gain approximately 5° of extra steering angle on an otherwise stock setup
Budget-friendly alternative to expensive angle kits
Simple, bolt-on installation—no major modifications required
Works as a standalone mod or can be paired with angle kits for even greater gains
Design & Materials:

Material: Mild Steel
Finish: Zinc Coated for durability
Size: 5mm spacers
Take your drifting to the next level—one small upgrade at a time with ECS Tuning’s Steering Rack Spacers!

Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:585167
Part#: ATK-BM-0283-60
Ships in 7 Business Days
$ 280.00 USD
Free Shipping on orders $49 and up
$ 280.00 USD
Free Shipping on orders $49 and up
Customize your M Steering wheel with Carbon Fiber Trim

AUTOTECKNIC - Corporate Logo
T#:5175749
Part#: ATK-BM-0282-H-S
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the F97 X3M and F98 X4M composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for heated steering wheels.
Show More Show Less
ECS - Corporate Logo
T#:4717335
Part#: 010655LA01
Special Order: No Guaranteed ETA
Sale - Save 15% $ 656.99

This product was last offered at the strikethrough price on
06-14-2026

$ 558.44 USD
Free Shipping
Sale - Save 15%
$ 656.99

This product was last offered at the strikethrough price on
06-14-2026

$ 558.44 USD
Free Shipping
This forged carbon fiber steering wheel offers an ergonomic grip design and features alcantara with white stitching and a white center stripe for a beautiful and functional replacement wheel!

AUTOTECKNIC - Corporate Logo
T#:5175765
Part#: ATK-BM-0114
Ships in 7 Business Days
$ 1,400.00 USD
Free Shipping on orders $49 and up
$ 1,400.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed a replacement steering wheel for the F97 X3M, F98 X4M, and all G01 and G02 models composed of 3k twill weave carbon fiber and finished accents with alcantara. Perfect if your wheel has been damaged, faded, or you are looking to upgrade from OEM! Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:5175751
Part#: ATK-BM-0282-NG30
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the G30 5-series and G32 6-Series GT composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for non-heated steering wheels.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39092992
Part#: BM-0282-NH-S
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
$ 295.00 USD
Free Shipping on orders $49 and up
The carbon fiber steering wheel trim for the F90 M5; it's for the 2018-2019 line of F90 M5. Made with durable OEM spec material and skillfully wrapped in 3K Twill weave carbon fiber and finished off with luxury Alcantara.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:5175781
Part#: ATK-BM-0275-G30
Ships in 7 Business Days
$ 375.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed a steering wheel top cover trim for the G11 7-series, G30 5-series, and G32 6-series GT composed of 3k twill weave carbon fiber. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:5175780
Part#: ATK-BM-0273
Ships in 7 Business Days
$ 395.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed a steering wheel top cover trim for the F90 M5 composed of 3k twill weave carbon fiber. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39092993
Part#: BM-0282-H-S
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
$ 295.00 USD
Free Shipping on orders $49 and up
The carbon fiber steering wheel trim for the F90 M5; it's for the 2018-2019 line of F90 M5. Made with durable OEM spec material and skillfully wrapped in 3K Twill weave carbon fiber and finished off with luxury Alcantara.
Show More Show Less


AUTOTECKNIC - Corporate Logo
T#:5175761
Part#: ATK-BM-0282-NHF9
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
$ 295.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the F90 M5 composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for non-heated steering wheels.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:5175759
Part#: ATK-BM-0282-G30H
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the G30 5-series and G32 6-Series GT composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for heated steering wheels.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:5175776
Part#: ATK-BM-0273F9X
Ships in 7 Business Days
$ 395.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed a steering wheel top cover trim for the F95 X5M and F96 X6M composed of 3k twill weave carbon fiber. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:5175758
Part#: ATK-BM-0282-G30N
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the G30 5-series and G32 6-Series GT composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for non-heated steering wheels.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:14419851
Part#: BM-0418
Ships in 7 Business Days
$ 395.00 USD
Free Shipping on orders $49 and up
Nominated as one of the 'must-mods' by owners around the world. This is for a set of AutoTecknic Carbon Fiber Pole Position Shift Paddles for the BMW G80 M3 and the G82 M4. It's a direct replacement for the OEM flat chrome surface shift paddles. As purists, we understand all car enthusiasts' goals—to go as fast as possible while maintaining safety and a comfortable position in the pilot's seat simultaneously. When it comes to piloting a vehicle, the driver is at optimum control when they become one with the car. These extended pole position paddle shifters were developed to make that concept a reality. Satisfy your carbon needs with these carbon paddles!
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:5175762
Part#: ATK-BM-0282-HF90
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
$ 295.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the F90 M5 composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for heated steering wheels.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:5175770
Part#: ATK-BM-0116
Ships in 7 Business Days
$ 1,400.00 USD
Free Shipping on orders $49 and up
$ 1,400.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed a replacement steering wheel for the F90 M5 composed of 3k twill weave carbon fiber and finished accents with alcantara. Perfect if your wheel has been damaged, faded, or you are looking to upgrade from OEM! Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:5175741
Part#: ATK-BM-0282-NH-S
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the F97 X3M and F98 X4M composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for non-heated steering wheels.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:5175760
Part#: ATK-BM-0282G30H2
Ships in 7 Business Days
$ 295.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the G30 5-series and G32 6-Series GT composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for heated steering wheels.
Show More Show Less

ECS - Corporate Logo
T#:12774044
Part#: BM152-F8014-FP3S
Special Order: No Guaranteed ETA
Sale - Save 5% $ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD
Free Shipping on orders $49 and up
This carbon fiber flat bottom steering wheel features soft perforated leather, forged carbon fiber, tri-color stitching. This wheel will allow you to further connect with your vehicle, and the soft perforated leather gives you a new level of control. This wheel looks absolutely fantastic and is a great way to dress up your interior.
Show More Show Less