Steering

Eliminate the grimy, leaky, factory BMW power steering expansion tank with a beautiful billet aluminum reservoir.
Upgraded for thermal capacity, performance and extended rack life!

Our Turner triple baffled reservoir allows you to fix the downfalls of the factory BMW power steering expansion tank without losing that factory feel. The upgraded Turner reservoir has internal baffling to prevent cavitation and air pocket to make sure your rack is getting the supply of power steering. The constant flow of power steering keeps your rack cooled, lubricated and functioning properly. Extend the life of your rack and seals for years to come with increased performance and drivability. Can be used in motorsport, off-roading and daily use applications for a truly unique and universal upgrade.

Eliminates the grimy, leaky, factory BMW power steering expansion tank with a beautiful aluminum component. Increased factory power steering performance in both feel and cooling. Factory-fit with both hoses and bracketry. Additional cooling capacity will increase fluid thermal carrying capacity before overheating. Adapters where necessary to ensure reservoir will work with to-be-designed AN hose kits as well as factory hoses. Add-on, in-line valves to allow for easy flushing of power steering fluid.

Features:

Billet aluminum construction

Eliminates the leaky factory BMW reservoir and replaces it with a billet aluminum component.

Upgraded 0.45L capacity for better cooling and reduced overflow.

Internal baffles to remove bubbles caused by pump cavitation

Compatible with factory hoses and factory bracket.

Removeable Internal mesh filter

Eliminate the grimy, leaky, factory BMW power steering expansion tank with a beautiful billet aluminum reservoir.
Upgraded for thermal capacity, performance and extended rack life!

Our Turner triple baffled reservoir allows you to fix the downfalls of the factory BMW power steering expansion tank without losing that factory feel. The upgraded Turner reservoir has internal baffling to prevent cavitation and air pocket to make sure your rack is getting the supply of power steering. The constant flow of power steering keeps your rack cooled, lubricated and functioning properly. Extend the life of your rack and seals for years to come with increased performance and drivability. Can be used in motorsport, off-roading and daily use applications for a truly unique and universal upgrade.

Eliminates the grimy, leaky, factory BMW power steering expansion tank with a beautiful aluminum component. Increased factory power steering performance in both feel and cooling. Factory-fit with both hoses and bracketry. Additional cooling capacity will increase fluid thermal carrying capacity before overheating. Adapters where necessary to ensure reservoir will work with to-be-designed AN hose kits as well as factory hoses. Add-on, in-line valves to allow for easy flushing of power steering fluid.

Features:

Billet aluminum construction

Eliminates the leaky factory BMW reservoir and replaces it with a billet aluminum component.

Upgraded 0.45L capacity for better cooling and reduced overflow.

Internal baffles to remove bubbles caused by pump cavitation

Compatible with factory hoses and factory bracket.

Removeable Internal mesh filter

Looking to upgrade your front suspension to increase the strength and your steering angle for the track? IRP has you covered with their BMW Lock Kit. This kit includes new control arms that are stronger than stock and have monoball ball joints, new tie rod ends that feature steel monoball ball joints as well, new offset control arm bushings, fully adjustable camber plates, roll center/bump steer correction plates, and all new hardware. This enables this kit to be fully plug and play, giving you a much more adjustable front suspension, and increases the total amount of steering angle up to 65 degrees.

This kit is perfect for those looking to build a drift car and ensure their suspension is ready to take on the challenge.

Kit features:

• CNC Laser Cut Components
• Plug & Play - includes all needed hardware
• Increase to 65 Degree (or more) steering angle
• Includes Camber Plates
• Stiffer offset control arm bushings
• Roll Center and Bump Steer Correction Plates
• High strength control arms with steel monoball ball joints
• Increased length steering tie rods with steel monoball ball joints
• DriftAllstar- & EEDC-Tested
• Total weight of all components included: 13.5 kg / 29.8 lbs

Fits the following BMWs:
1999-2006 E46 BMW M3

Looking to upgrade your front suspension to increase the strength and your steering angle for the track? IRP has you covered with their BMW Lock Kit. This kit includes new control arms that are stronger than stock, are a chromolon tubular system, and have monoball ball joints, new tie rod ends that feature steel monoball ball joints as well, new offset control arm bushings, fully adjustable camber plates, roll center/bump steer correction plates, and all new hardware. This enables this kit to be fully plug and play, giving you a much more adjustable front suspension, and increases the total amount of steering angle up to 70 degrees.

This kit is perfect for those looking to build a drift car and ensure their suspension is ready to take on the challenge.

*This Pro kit offers reduced weight control arms that help this kit shed 2.9 lbs from the standard kit while still remaining just as strong thanks to their chromolon tubular design.*

Kit features:

• CNC Laser Cut Components
• Plug & Play - includes all needed hardware
• Increase to 70 Degree (or more) steering angle (5 degrees more than standard version)
• Includes Camber Plates
• Stiffer offset control arm bushings
• Roll Center and Bump Steer Correction Plates
• High Strength chromolon tubular control arms with steel monoball ball joints (2cm wider than standard version)
• Increased length steering tie rods with steel monoball ball joints
• DriftAllstar- & EEDC-Tested
• Total weight of all components included: 12.2kg / 26.9lbs (1.3kg / 2.9lbs lighter that standard version)

Fits the following BMWs:
1992-1999 E36 BMW All Submodels

Looking to upgrade your front suspension to increase the strength and your steering angle for the track? IRP has you covered with their BMW Lock Kit. This kit includes new control arms that are stronger than stock, are a chromolon tubular system, and have monoball ball joints, new tie rod ends that feature steel monoball ball joints as well, new offset control arm bushings, fully adjustable camber plates, roll center/bump steer correction plates, and all new hardware. This enables this kit to be fully plug and play, giving you a much more adjustable front suspension, and increases the total amount of steering angle up to 70 degrees.

This kit is perfect for those looking to build a drift car and ensure their suspension is ready to take on the challenge.

*This Pro kit offers reduced weight control arms that help this kit shed 2.9 lbs from the standard kit while still remaining just as strong thanks to their chromolon tubular design.*

Kit features:

• CNC Laser Cut Components
• Plug & Play - includes all needed hardware
• Increase to 70 Degree (or more) steering angle (5 degrees more than standard version)
• Includes Camber Plates
• Stiffer offset control arm bushings
• Roll Center and Bump Steer Correction Plates
• High Strength chromolon tubular control arms with steel monoball ball joints (2cm wider than standard version)
• Increased length steering tie rods with steel monoball ball joints
• DriftAllstar- & EEDC-Tested
• Total weight of all components included: 12.2kg / 26.9lbs (1.3kg / 2.9lbs lighter that standard version)

Fits the following BMWs:
1982-1991 E30 BMW All RWD Submodels

Looking to upgrade your front suspension to increase the strength and your steering angle for the track? IRP has you covered with their BMW Lock Kit. This kit includes new control arms that are stronger than stock and have monoball ball joints, new tie rod ends that feature steel monoball ball joints as well, new offset control arm bushings, fully adjustable camber plates, roll center/bump steer correction plates, and all new hardware. This enables this kit to be fully plug and play, giving you a much more adjustable front suspension, and increases the total amount of steering angle up to 65 degrees.

This kit is perfect for those looking to build a drift car and ensure their suspension is ready to take on the challenge.

Kit features:

• CNC Laser Cut Components
• Plug & Play - includes all needed hardware
• Increase to 65 Degree (or more) steering angle
• Includes Camber Plates
• Stiffer offset control arm bushings
• Roll Center and Bump Steer Correction Plates
• High strength control arms with steel monoball ball joints
• Increased length steering tie rods with steel monoball ball joints
• DriftAllstar- & EEDC-Tested
• Total weight of all components included: 13.5 kg / 29.8 lbs

Fits the following BMWs:
1992-1999 E36 BMW All Submodels