Find Parts That Fit Your Vehicle

Doorbusters BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

E9x RWD Upgraded Monoball Thrust Arms With Performance Coilovers Purc...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:22822592
Part#: 029309ECS01DBKT
In Stock
Sale - Save 32% $ 1,918.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,299.00 USD
Free Shipping
Sale - Save 32%
$ 1,918.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,299.00 USD
Free Shipping

Upgrade your BMW E90/E92 RWD with the ECS Tuning Performance Coilover System, meticulously designed for daily drivers seeking improved performance without sacrificing comfort. Experience the smoothness of a stock setup while achieving an aggressive look and significantly enhanced handling, all at an affordable price.

Key Features:

  • Performance Coilover System:
    • Sport-tuned, height, damping, and body adjustable suspension
    • High-quality materials and coatings for optimal performance
    • Perfect ride height for a dynamic appearance
    • Spring Rates: Front 8kg/mm, Rear 12kg/mm

Performance Features:

  • 32 levels of rebound damping adjustment
  • Monotube shocks/struts with optimized progressive rate coil springs for road-sticking grip
  • Lowered ride height improves handling with a lower center of gravity
  • Adjustable front bodies maintain ride height and correct spring pre-load
  • Adjustable front and rear bodies ensure the shock operates in the correct valving range, regardless of ride height

Product Design:

  • Durable gloss black powder-coated strut and shock bodies
  • Clear zinc-coated threaded portions for optimum corrosion protection
  • Reflex Silver Metallic powder-coated coil springs for durability
  • Red anodized, billet aluminum lower spring seats with locking collars for on-the-car adjustability
  • Integrated bump stops for added protection

Turner Motorsport Upgraded Thrust Arm With Pre-installed Monoball Bushings:

Address the common issues with weak front thrust arm bushings in BMWs with the Turner Motorsport solution. This upgrade offers superior durability and nearly instantaneous cornering and braking response.

Features:

  • Ball Joint / Monoball:
    • OEM BMW sealed, greased ball joint for exceptional durability
  • Housing:
    • 6061-T6 anodized housing for excellent corrosion resistance
    • Proprietary Turner designed knurled OD for a perfect fit among different thrust arm bore diameters
  • Bearing Inserts:
    • CNC machined 304ss for a precision fit between the ball joint and the subframe
  • Performance:
    • Nearly instantaneous, crisp steering and braking response
    • Maintenance-free, long-lasting performance
    • Improved road feel without undesirable NVH

Upgrade your BMW for optimal road feel and performance, whether for daily driving or spirited adventures.

Show More Show Less
F10 RWD Monoball Thrust Arms With Performance Coilovers Purchase ...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:22822595
Part#: 000169LA01DBKT
In Stock
Sale - Save 35% $ 1,838.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,199.00 USD
Free Shipping
Sale - Save 35%
$ 1,838.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,199.00 USD
Free Shipping

Introducing the revolutionary F10 RWD Coilovers from our latest BMW Coilover Line, meticulously engineered for the daily driver. Balancing performance, aesthetics, and comfort, these coilovers deliver a smooth and comfortable ride akin to a stock setup, yet with an aggressive look and vastly enhanced handling—all at an unbeatable price point.

Key Features:

  • ECS Tuning Performance Coilover System:
    • Sport-tuned, height, damping, and body adjustable suspension
    • 32 levels of rebound damping adjustment
    • Monotube shocks/struts with progressive rate coil springs for optimal grip
    • Lowered ride height for improved handling
    • Adjustable front bodies for personalized ride height and correct spring pre-load
    • Gloss black powder-coated strut and shock bodies for durability
    • Clear zinc-coated threaded portions for corrosion protection
    • Reflex Silver Metallic powder-coated coil springs
    • Red anodized, billet aluminum lower spring seats with locking collars
    • Integrated bump stops for added stability

Free Upgrade - Turner Motorsport Upgraded Thrust Arm With Pre-installed Monoball Bushings:

Address weak OEM front thrust arm bushings, enhance handling and braking performance with CNC machined 6061-T6 anodized aluminum housing. Featuring a sealed OEM BMW ball joint for exceptional durability, knurled OD for a perfect press fit, and CNC machined 304ss bearing inserts for precision. Enjoy nearly instantaneous steering and braking response, maintenance-free, long-lasting performance, and improved road feel without undesirable NVH.

Show More Show Less
E9x AWD Monoball Thrust Arms With Performance Coilovers Purchase ...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:22822591
Part#: 029310ECS01DBKT
In Stock
Sale - Save 31% $ 1,875.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,299.00 USD
Free Shipping
Sale - Save 31%
$ 1,875.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,299.00 USD
Free Shipping

Enhance the driving experience of your E90/E92 AWD BMW with the ECS Tuning Performance Coilover System. Specifically designed for daily drivers, these coilovers strike a perfect balance between performance improvement, aesthetic appeal, and comfort. Experience the smoothness of a stock setup while enjoying an aggressive look and significantly enhanced handling, all at an affordable cost.

Key Features:

  • Performance Coilover System:
    • Sport-tuned, height, damping, and body adjustable suspension
    • High-quality materials and coatings for optimal performance
    • Perfect ride height for a dynamic appearance
    • Spring Rates: Front 8kg/mm, Rear 12kg/mm

Performance Features:

  • 32 levels of rebound damping adjustment
  • Monotube shocks/struts with optimized progressive rate coil springs for road-sticking grip
  • Lowered ride height improves handling with a lower center of gravity
  • Adjustable front bodies maintain ride height and correct spring pre-load
  • Adjustable front and rear bodies ensure the shock operates in the correct valving range, regardless of ride height

Product Design:

  • Durable gloss black powder-coated strut and shock bodies
  • Clear zinc-coated threaded portions for optimum corrosion protection
  • Reflex Silver Metallic powder-coated coil springs for durability
  • Red anodized, billet aluminum lower spring seats with locking collars for on-the-car adjustability
  • Integrated bump stops for added protection

Upgrade - Turner Motorsport Thrust Arm With Pre-installed Monoball Bushings:

Upgrade your front thrust arm bushings with Turner Motorsport's solution for superior durability and performance. This free item is designed to address the common issues associated with OEM rubber bushings, providing nearly instantaneous cornering and braking response.

Features:

  • Ball Joint / Monoball:
    • OEM BMW sealed, greased ball joint for exceptional durability
  • Housing:
    • 6061-T6 anodized housing for excellent corrosion resistance
    • Proprietary Turner designed knurled OD for a perfect fit among different thrust arm bore diameters
  • Bearing Inserts:
    • CNC machined 304ss for a precision fit between the ball joint and the subframe
  • Performance:
    • Nearly instantaneous, crisp steering and braking response
    • Maintenance-free, long-lasting performance
    • Improved road feel without undesirable NVH

Upgrade your BMW to a track-ready machine while maintaining the comfort needed for spirited driving.

Show More Show Less

E46 M3 Monoball FCAB's With Performance Coilovers Purchase
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:22822590
Part#: 029308ECS01DBKT
In Stock
Sale - Save 27% $ 1,642.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,199.00 USD
Free Shipping
Sale - Save 27%
$ 1,642.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,199.00 USD
Free Shipping

Elevate your E46 M3 driving experience with the ECS Tuning Performance Coilover System. Crafted with daily drivers in mind, these coilovers seamlessly blend enhanced performance, aggressive aesthetics, and comfort, offering a smooth ride comparable to stock setups. Unleash the full potential of your BMW's suspension with top-tier coilovers at a fraction of the cost.

Key Features:

  • Performance Coilover System:
    • Sport-tuned, height, damping, and body adjustable suspension
    • High-quality materials and coatings for optimal performance
    • Perfect ride height for a dynamic appearance
    • Spring Rates: Front 12kg/mm, Rear 10kg/mm

Performance Features:

  • 32 levels of rebound damping adjustment
  • Monotube shocks/struts with progressive rate coil springs for road-sticking grip
  • Lowered ride height improves handling with a lower center of gravity
  • Adjustable front bodies maintain ride height and correct spring pre-load
  • Adjustable front and rear bodies ensure the shock operates in the correct valving range, regardless of ride height

Product Design:

  • Durable gloss black powder-coated strut and shock bodies
  • Clear zinc-coated threaded portions for optimum corrosion protection
  • Reflex Silver Metallic powder-coated coil springs for durability
  • Red anodized, billet aluminum lower spring seats with locking collars for on-the-car adjustability
  • Integrated bump stops for added protection

Upgrade further with the Turner Motorsport Control Arm Monoball Upgrade with housings (FCAB) for unparalleled handling and braking performance.

Key Features:

  • Bearing:
    • Extremely robust, greaseable, double lip sealed spherical bearing (Rated for 20,000lbf Dynamic, 90,000lbf Static)
  • Housing:
    • 6061-T6, anodized housing with needle grease zerk for easy maintenance
    • In-house designed knurled OD for a perfect fit across housing diameters
  • Bearing Insert Arm Adapter:
    • Precision CNC machined Delrin, ensuring a tight fit between the bearing and the control arm
  • Performance:
    • Instant, crisp steering and braking response
    • Easy maintenance with long-lasting performance
    • Improved road feel without undesirable NVH
    • Grease before installation and with each oil service using high-quality Moly grease for maximum service life. Grease fitting tool - ES#3410138 or complete kit - ES#3411244.

Transform your E46 M3 into a track-ready machine while maintaining street-ability for the spirited enthusiast.

Show More Show Less

F10 xDrive Monoball Thrust Arms With Performance Coilovers Purchase ...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:22822599
Part#: 002361ECS01DBKT
In Stock
Sale - Save 28% $ 1,955.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,399.00 USD
Free Shipping
Sale - Save 28%
$ 1,955.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,399.00 USD
Free Shipping

Unleash the potential of your BMW with the F10 xDrive Coilovers, meticulously crafted for the daily driver seeking an optimal blend of performance, aesthetics, and comfort. With 32 levels of damping and tailored height adjustments, these coilovers strike the perfect balance between firmness and compliance, enhancing your vehicle's look and handling prowess.

Key Features:

  • ECS Tuning Performance Coilover System:
    • Sport-tuned, height, damping, and body adjustable suspension
    • 32 levels of rebound damping adjustment
    • Adjustable front sway bar end links
    • Lowering Adjustment of: 1" - 4.5"
    • Progressive rate coil springs for heat-treated durability
    • Monotube shocks/struts for road-sticking grip
    • Lowered ride height for improved handling
    • Adjustable front bodies for personalized ride height and correct spring pre-load

Product Design:

  • Strut and shock bodies finished in durable gloss black powder coat
  • Zinc-coated threaded portions for corrosion protection
  • Reflex Silver Metallic powder-coated coil springs
  • Red anodized, billet aluminum spring seats with locking collars
  • Anodized adjustable sway bar end links with heavy-duty bushings
  • Zinc-coated flanged nuts for shock & strut shaft pins
  • E-coated rear shock adjuster housings for durability
  • Zinc-coated lower spring perches
  • Integrated bump stops and dust boots

Note: For vehicles without Electronic Damping (EDC/DDC or Adaptive Suspension). Vehicles with Electronic Damping will require the use of a cancellation kit to prevent error lights. (SEE ES#2966824)

Upgrade - Turner Motorsport Upgraded Thrust Arm With Pre-installed Monoball Bushings:

  • Solve weak OEM front thrust arm bushing issues
  • Sealed OEM BMW ball joint for exceptional durability
  • Precision CNC machined 6061-T6 anodized aluminum housing
  • Knurled OD for a perfect press fit
  • CNC machined 304ss bearing inserts for precision
  • Nearly instantaneous steering and braking response
  • Maintenance-free, long-lasting performance
  • Improved road feel without undesirable NVH
Show More Show Less
E36 Monoball FCAB's With Non-M Performance Coilovers Purchase ...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:22822586
Part#: 000189LA01DBKT
In Stock
Sale - Save 45% $ 1,623.99

This product was last offered at the strikethrough price on
11-07-2026

$ 899.00 USD
Free Shipping
Sale - Save 45%
$ 1,623.99

This product was last offered at the strikethrough price on
11-07-2026

$ 899.00 USD
Free Shipping

Upgrade your E36's suspension with the ECS Tuning Performance Coilover System and get a upgraded Monoball FCAB! This sport-tuned system offers adjustable height, damping, and body settings for a customized driving experience. Crafted with high-quality materials, it replaces worn suspensions, providing substantial performance benefits and achieving that perfect ride height.

  • Spring Rates: Front 12kg/mm, Rear 10kg/mm
  • Performance Features:
    • 32 levels of rebound damping adjustment
    • Monotube shocks/struts with progressive rate coil springs for road-sticking grip
    • Lowered ride height improves handling performance
  • Product Design:
    • Durable gloss black powder coat on strut and shock bodies
    • Clear zinc-coated threaded portions for corrosion protection
    • Reflex Silver Metallic finish on powder-coated coil springs
    • Red anodized billet aluminum lower spring seats with locking collars
    • Integrated bump stops

Revitalize your E30/E36 with the FCAB and pre-installed monoball upgrade. This front control arm bushing replacement offers precise, predictable handling without the harshness of solid bushings. Greaseable and serviceable, it enhances performance without sacrificing daily driving comfort.

  • Stock vs. Upgrade:
    • Stock rubber bushings designed for comfort, not optimal performance
    • Poly and delrin bushings compromise handling and wear prematurely
  • Turner Front Control Arm Spherical Bearings:
    • Greaseable spherical bearing for improved precision and durability
    • 6061-T6 anodized housing with needle grease zerk for easy maintenance
    • Precision CNC machined Delrin arm adapter for a tight fit
  • Performance Benefits:
    • Instant, crisp steering and braking response
    • Easy maintenance with long-lasting performance
    • Improved road feel without undesirable NVH

Ensure optimal performance with Turner's Front Control Arm Spherical Bearings – a must-have for track enthusiasts and a great upgrade for spirited driving on the streets.

Show More Show Less

Monoball Rear Trailing Arm Bushings & Upper Control Arm Bushings - E3...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:47473691
Part#: 017738TMSDBKT
In Stock
Sale - Save 22% $ 635.99

This product was last offered at the strikethrough price on
11-07-2026

$ 499.00 USD
Free Shipping
Sale - Save 22%
$ 635.99

This product was last offered at the strikethrough price on
11-07-2026

$ 499.00 USD
Free Shipping

Dial in your BMW’s handling like never before with this exclusive Doorbuster offer! Turner Motorsport’s Monoball Rear Trailing Arm Bushings (RTAB) deliver precision alignment, improved rear articulation, and race-inspired performance for the street or track. With a newly available sealed design, these bushings combine ultimate performance with long-lasting durability—making them the perfect upgrade for any BMW enthusiast.

Turner Monoball Rear Trailing Arm Bushings (RTAB)

Turner’s redesigned RTABs now feature a sealed bearing, protecting against contaminants like salt, grit, and road debris while eliminating the need for any lubrication or maintenance—ever. Drawing on over two decades of racetrack expertise, Turner brings precision, durability, and performance straight to your BMW.

Key Benefits:

Eliminates unwanted deflection, maintaining alignment and reducing wheel hop

Allows full trailing arm articulation with low-friction movement

Eliminates binding issues common in rubber or poly bushings

Street-ready: uses OE Lemforder sealed, greased ball joints for long life without increasing NVH

Design Features:

Housing: CNC billet 6061-T6 aluminum, type II anodized for corrosion resistance and strength

Bearing: OE Mercedes/Lemforder 2043520027 sealed ball joint

Bearing Inserts: CNC machined 303 stainless steel

Rebuildable: Rebuild Kit ES2695379 (x2) available

Turner Monoball Rear Upper Control Arm Inner Bushings – Race

For the ultimate in performance, Turner also offers monoball rear upper control arm bushings designed exclusively for track use. These race-grade bushings prevent side loading, allowing full control arm movement and unparalleled precision. While optimized for the track, daring enthusiasts willing to tolerate increased noise, vibration, and harshness may also consider them for street use.

Turner Motorsport continues to deliver high-quality BMW performance parts that combine durability, precision, and race-bred technology—allowing your BMW to perform at its full potential.

Show More Show Less
Monoball Thrust Arm Upgrade & Camber Plates - E8X/E9X
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:47473705
Part#: 025532TMSDBKT
In Stock
Sale - Save 24% $ 984.99

This product was last offered at the strikethrough price on
11-07-2026

$ 749.00 USD
Free Shipping
Sale - Save 24%
$ 984.99

This product was last offered at the strikethrough price on
11-07-2026

$ 749.00 USD
Free Shipping

Upgrade your E9X BMW with this all-in-one Turner Motorsport bundle featuring Fixed Camber Plates and Monoball Front Thrust Arms. Designed to improve handling, reduce deflection, and increase steering precision, this package delivers a noticeable performance boost both on the street and track—all without breaking the bank.

E9X Front Camber Plates – Fixed Position

Most BMWs leave the factory with conservative front camber to encourage understeer, which compromises handling and accelerates tire wear by reducing contact patch engagement. Turner Motorsport’s Fixed Camber Plates are a simple, effective solution, adding up to 2.5° of negative camber to your E90, E92, or E93.

By increasing front negative camber, you’ll enjoy:

Improved turn-in and cornering confidence

Reduced tire wear

Better overall handling balance

Designed with expertise gained from Turner Motorsport’s participation in the Speed World Challenge series, these plates are offset for the optimal camber/caster combination when running stock-diameter springs. They add only ~6mm of ride height and utilize the factory upper strut mount for a clean, straightforward installation—perfect for racing classes where adjustable camber plates are restricted, or for enthusiasts who want a simple, cost-effective negative camber upgrade.

Installation: Press out OEM studs and alignment pin; see Turner’s detailed PDF for guidance.

Monoball Front Thrust Arm Upgrade Kit

BMW’s stock front thrust arm bushings are soft, compliant, and prone to wear—allowing fore/aft wheel movement that degrades steering feel, alignment, braking response, and tire performance. While designed for comfort, these OEM components fall short for enthusiasts and track-focused drivers seeking maximum control.

Turner Motorsport’s Monoball Front Thrust Arms solve these issues with:

Sealed OEM BMW ball joints for exceptional durability

CNC-machined 6061-T6 anodized aluminum bearing assembly with knurled OD for perfect press-fit and long life

Low-friction, no-bind design to eliminate unwanted suspension deflection

The result? Instantaneous turn-in, precise steering, direct braking feedback, and exceptional suspension feel, all while maintaining comfort and reliability for daily driving. Perfect for track use or spirited street driving, these thrust arms are a no-compromise upgrade for anyone looking to enhance BMW front-end performance.

Show More Show Less

Lowering Spring Set With Performance Rear Trailing Arm Set - E90 xDri...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:34885379
Part#: 051056LADBKT
In Stock
Sale - Save 27% $ 683.99

This product was last offered at the strikethrough price on
11-07-2026

$ 499.00 USD
Free Shipping
Sale - Save 27%
$ 683.99

This product was last offered at the strikethrough price on
11-07-2026

$ 499.00 USD
Free Shipping

Limited-Time Offer: Get a Set of ECS Performance Rear Trailing Arms with Your Purchase of an ECS Lowering Spring Set! Upgrade your E90 xDrive’s suspension performance and aesthetics with two essential upgrades in one unbeatable package.

ECS E90 xDrive Lowering Spring Set Transform your E90’s handling and stance with our specially designed ECS Lowering Springs. Built to enhance both cornering capability and ride comfort, these springs provide a balanced drop between 1.0"-1.3", giving your vehicle a sportier profile while keeping a smooth, OEM-like ride. Experience a lower center of gravity for improved stability, enhanced steering feedback, and a sleek look that reduces unsightly wheel gap for a true performance appearance.

Why Choose ECS Lowering Springs?

Better Handling and Stability: By lowering the center of gravity, these springs reduce body roll and improve road grip, delivering precise control through corners. Performance-Driven Design: Linear spring rates tuned for sporty responsiveness without sacrificing comfort, making them ideal for daily driving. Durability You Can Trust: Finished with a flat black powder coating for excellent corrosion resistance, so they look great and last. Specifications

Lowering Range: Front 1.0"-1.2", Rear 1.2"-1.3" Spring Rate: Front 505 lbs/in, Rear 854 lbs/in Ideal for Daily Drivers and Enthusiasts: With rates slightly above factory specs, ECS Lowering Springs provide improved handling without the harshness typical of coilovers, making them perfect for drivers seeking a more refined, performance-focused setup. Take it a step further by adding wheel spacers to achieve the ultimate stance—browse our wide selection of options for the E90 xDrive to complete your suspension overhaul!

ECS Performance Rear Trailing Arm Set Say goodbye to suspension flex and unwanted geometry changes under load with our Performance Rear Trailing Arms, an upgrade engineered to enhance strength and handling precision. Factory steel trailing arms can flex and even fail under harsh conditions, but these trailing arms are built to stand the test of time. Lightweight, rigid, and built from solid 6061-T6 aluminum, these trailing arms offer improved stability and peace of mind, no matter how demanding the road.

Why Upgrade to ECS Rear Trailing Arms?

Engineered for Strength: Constructed from high-grade 6061-T6 aluminum, anodized for corrosion resistance, these arms are designed to last longer and handle tougher conditions than OEM steel arms. Lightweight and Strong: Each arm is 25% lighter than stock, weighing 384 grams versus the factory 517 grams, reducing unsprung weight for better performance. Easy DIY Installation: Designed to fit seamlessly, these trailing arms won’t alter alignment settings, making them a straightforward upgrade for enthusiasts and home mechanics alike. Enhanced Handling: With virtually no flex, they eliminate unwanted suspension changes, providing a smoother, more controlled ride. Kit Includes

Lowering Spring Set: Front and rear springs with precise lowering specs and premium powder coating. Rear Trailing Arms: A set of solid 6061-T6 aluminum trailing arms, ready for direct replacement, along with all necessary hardware. Bolt Torque Spec: 74 ft-lbs

Whether you’re refreshing your E90’s suspension or completing the final touches, this ECS combo is the ultimate solution for boosted performance, aesthetics, and reliability. Get ready to drive with confidence and style!

Show More Show Less

E36 M3 Upgraded Monoball FCAB's With ECS Performance Coilovers Purcha...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:22822587
Part#: 029305ECS01DBKT
In Stock
Sale - Save 41% $ 1,533.99

This product was last offered at the strikethrough price on
11-07-2026

$ 899.00 USD
Free Shipping
Sale - Save 41%
$ 1,533.99

This product was last offered at the strikethrough price on
11-07-2026

$ 899.00 USD
Free Shipping

Elevate the performance of your E36 M3 with the ECS Tuning Performance Coilover System. This sport-tuned suspension offers adjustable height, damping, and body settings, providing substantial performance benefits. Crafted with high-quality materials and coatings, it replaces worn suspension components while achieving the ideal ride height.

  • Spring Rates: Front 6kg/mm, Rear 8kg/mm
  • Performance Features:
    • 32 levels of rebound damping adjustment
    • Monotube shocks/struts with optimized progressive rate coil springs for road-sticking grip
    • Lowered ride height improves handling performance
    • Adjustable front bodies for personalized ride height and correct spring pre-load
  • Product Design:
    • Durable gloss black powder coat on strut and shock bodies
    • Clear zinc-coated threaded portions for corrosion protection
    • Reflex Silver Metallic finish on powder-coated coil springs
    • Red anodized billet aluminum lower spring seats with locking collars
    • Integrated bump stops

Revitalize your E30/E36 with the FCAB and pre-installed monoball upgrade. This front control arm bushing replacement offers precise, predictable handling without the harshness of solid bushings. Greaseable and serviceable, it enhances performance without sacrificing daily driving comfort.

  • Stock vs. Upgrade:
    • Stock rubber bushings designed for comfort, not optimal performance
    • Poly and delrin bushings compromise handling and wear prematurely
  • Turner Front Control Arm Spherical Bearings:
    • Greaseable spherical bearing for improved precision and durability
    • 6061-T6 anodized housing with needle grease zerk for easy maintenance
    • Precision CNC machined Delrin arm adapter for a tight fit
  • Performance Benefits:
    • Instant, crisp steering and braking response
    • Easy maintenance with long-lasting performance
    • Improved road feel without undesirable NVH

Ensure optimal performance with Turner's Front Control Arm Spherical Bearings – a must-have for track enthusiasts and a great upgrade for spirited driving on the streets.

Show More Show Less
E82/E88 Monoball Thrust Arms With Performance Coilovers Purchase ...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:22822593
Part#: 000465LA01DBKT
In Stock
Sale - Save 36% $ 2,039.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,299.00 USD
Free Shipping
Sale - Save 36%
$ 2,039.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,299.00 USD
Free Shipping

Enhance the performance and aesthetics of your E82/E88 1 Series with our meticulously crafted Coilover Line from BMW. Engineered with daily drivers in mind, these coilovers strike the perfect balance between firmness and comfort, providing a smooth, stock-like feel while delivering an aggressive look and significantly improved handling.

Key Features:

  • Performance Coilover System:
    • Sport-tuned, height, damping, and body adjustable suspension
    • 32 levels of rebound damping adjustment
    • Integrated camber plates for +/-1.5 degrees of adjustment
    • Ride height adjustment: 1" - 3.5" drop
    • Heat-treated, progressive rate coil springs

Performance Features:

  • Monotube shocks/struts with optimized progressive rate coil springs for road-sticking grip
  • Lowered ride height improves handling with a lower center of gravity
  • Adjustable front bodies for ride height and correct spring pre-load
  • Adjustable front and rear bodies ensure the shock operates in the correct valving range, regardless of ride height

Product Design:

  • Durable gloss black powder-coated strut and shock bodies
  • Zinc-coated threaded portions for corrosion protection
  • Powder-coated Reflex Silver Metallic finish on coil springs
  • Red anodized, billet aluminum spring seats with locking collars for on-the-car adjustability
  • Self-locking, zinc-coated flanged nuts for shock & strut shaft pins
  • Zinc-coated lower spring perches
  • Integrated bump stops and dust boots
  • Various zinc coatings for corrosion protection (finish will vary between clear or black zinc coatings depending on availability)

Upgrade - Turner Motorsport Upgraded Thrust Arm With Pre-installed Monoball Bushings:

Address the weak front thrust arm bushings in your BMW with our free Turner Motorsport upgrade. Designed for optimal handling and braking performance, these thrust arm monoballs offer durability and nearly instantaneous cornering and braking response.

Features:

  • Ball Joint / Monoball:
    • OEM BMW sealed, greased ball joint for exceptional durability
  • Housing:
    • 6061-T6 anodized housing for excellent corrosion resistance
    • Proprietary Turner designed knurled OD for a perfect fit among different thrust arm bore diameters
  • Bearing Inserts:
    • CNC machined 304ss for a precision fit between the ball joint and the subframe
  • Performance:
    • Nearly instantaneous, crisp steering and braking response
    • Maintenance-free, long-lasting performance
    • Improved road feel without undesirable NVH

Upgrade your driving experience with these essential enhancements suitable for both street and track enthusiasts.

Show More Show Less
E46 Monoball FCAB's Non-M With Performance Coilovers Purchase ...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:22822589
Part#: 029307ECS01DBKT
In Stock
Sale - Save 24% $ 1,713.98

This product was last offered at the strikethrough price on
11-07-2026

$ 1,299.00 USD
Free Shipping
Sale - Save 24%
$ 1,713.98

This product was last offered at the strikethrough price on
11-07-2026

$ 1,299.00 USD
Free Shipping

Upgrade your E46 Non-M with the ECS Tuning Performance Coilover System, meticulously designed for daily drivers seeking enhanced performance without sacrificing comfort. These coilovers provide a smooth and comfortable ride similar to stock setups while delivering an aggressive aesthetic and significantly improved handling at a fraction of the cost.

Key Features:

  • Performance Coilover System:
    • Sport-tuned, height, damping, and body adjustable suspension
    • High-quality materials and coatings for enhanced performance
    • Perfect ride height*
    • Spring Rates: Front 8kg/mm, Rear 10kg/mm
    • *May require adjustable shorter end links depending on fitment or desired ride height.

Performance Features:

  • 32 levels of rebound damping adjustment
  • Monotube shocks/struts with optimized progressive rate coil springs for road-sticking grip
  • Lowered ride height improves handling by lowering the center of gravity
  • Adjustable front bodies maintain correct spring pre-load
  • Adjustable front and rear bodies ensure shock operates in the correct valving range, regardless of ride height

Product Design:

  • Strut and shock bodies finished with a durable gloss black powder coat
  • Threaded portions clear zinc coated for optimum corrosion protection
  • Coil springs powder-coated in Reflex Silver Metallic for durability
  • Red anodized, billet aluminum lower spring seats with locking collars for on-the-car adjustability
  • Integrated bump stops for added protection

Upgrade further with the Turner Motorsport Control Arm Monoball Upgrade with housings (FCAB). Stock rubber front control arm bushings, while maximizing daily comfort, fall short for performance and racing enthusiasts. The Turner solution offers a no-compromise design, providing instantaneous cornering and braking response without modification.

Key Features:

  • Bearing:
    • Extremely robust, greaseable, double lip sealed spherical bearing (Rated for 20,000lbf Dynamic, 90,000lbf Static)
  • Housing:
    • 6061-T6, anodized housing with needle grease zerk for easy maintenance
    • In-house designed knurled OD for a perfect fit across housing diameters
  • Bearing Insert Arm Adapter:
    • Precision CNC machined Delrin for a tight fit between the bearing and the control arm
  • Performance:
    • Instant, crisp steering and braking response
    • Easy maintenance with long-lasting performance
    • Improved road feel without undesirable NVH
    • Grease before installation and with each oil service using high-quality Moly grease for maximum service life. Grease fitting tool - ES#3410138 or complete kit - ES#3411244.

Ensure your E46 delivers optimal handling and braking performance with these essential upgrades.

Show More Show Less


ECS Adjustable Coilover System & Turner Motorsport Offset Polyurethan...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:47439407
Part#: 051535LADBKT2
Ships on Mar 25, 2027
Sale - Save 17% $ 1,078.99

This product was last offered at the strikethrough price on
11-07-2026

$ 899.00 USD
Free Shipping
Sale - Save 17%
$ 1,078.99

This product was last offered at the strikethrough price on
11-07-2026

$ 899.00 USD
Free Shipping

Push your E30’s handling to the next level with this limited-time Doorbuster bundle, combining ECS Performance Adjustable Coilovers with Turner Motorsport Polyurethane Front Control Arm Bushings for sharper cornering, reduced deflection, and a more connected, engaging driving experience.

ECS Performance Adjustable Coilover System – E30 (51mm)

Engineered for the enthusiast who drives daily but demands performance, ECS coilovers strike the perfect balance of firmness, compliance, and aggressive stance. With fully adjustable ride height and 32 levels of damping, these coilovers improve handling while maintaining comfort, giving your E30 a refined, track-ready feel.

Performance Highlights:

32 levels of rebound damping adjustment for precise tuning

Lowering range: 1" – 4" for perfect stance and lowered center of gravity

Spring rates: 8K Front / 10K Rear, heat-treated progressive coil springs

Monotube adjustable shocks/struts paired with optimized springs for reduced body roll

Adjustable front and rear bodies maintain correct spring preload and shock valving regardless of ride height

Design & Construction:

Strut and shock bodies finished in durable gloss black powder coat

Threaded portions zinc-coated for corrosion protection

Coil springs finished in Reflex Silver Metallic

Red anodized aluminum spring seats with locking collars for quick, on-car adjustments

Adjustable sway bar end links with heavy-duty bushings included

Integrated bump stops and dust boots, zinc-coated mounting hardware

Turner Motorsport Offset Polyurethane Front Control Arm Bushings (80A)

Start your handling upgrade at the control arms. Factory bushings prioritize comfort, allowing deflection that softens steering and braking precision. Turner 80A polyurethane bushings replace this softness with a direct connection to the chassis, reducing slop while maintaining streetable compliance. Pre-installed in high-quality housings, these bushings also feature an offset design for increased caster, enhancing straight-line stability and cornering performance.

Key Features:

80A polyurethane for firm yet compliant handling

Offset design increases caster for improved tracking and stability

Pre-installed in durable housings for easy installation

CNC-machined Delrin center sleeve ensures low friction, high precision, and deflection-free operation

Internal grease retention grooves included; bushing grease supplied

Show More Show Less
E60 Non-M Monoball Thrust Arms With Performance Coilovers Purchase ...
Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
Doorbusters - Corporate Logo
T#:22822598
Part#: 029314ECS01DBKT
In Stock
Sale - Save 34% $ 1,974.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,299.00 USD
Free Shipping
Sale - Save 34%
$ 1,974.99

This product was last offered at the strikethrough price on
11-07-2026

$ 1,299.00 USD
Free Shipping

Elevate your BMW E60 Non-M RWD driving experience with our meticulously crafted Coilover line, designed for daily drivers seeking a perfect balance of performance and comfort. These coilovers, akin to top-tier counterparts, offer a smooth, stock-like feel while enhancing the aesthetics, handling, and performance at an unbeatable value.

Key Features:

  • Performance Coilover System:
    • Sport-tuned, height, damping, and body adjustable suspension
    • High-quality materials for improved performance
    • Perfect ride height for optimal appearance
    • Spring Rates: Front 12kg/mm, Rear 8kg/mm

Performance Features:

  • 32 levels of rebound damping adjustment
  • Monotube shocks/struts with progressive rate coil springs for road-sticking grip
  • Lowered ride height improves handling with a lower center of gravity
  • Adjustable front bodies maintain ride height and correct spring pre-load
  • Adjustable front and rear bodies ensure the shock operates in the correct valving range, regardless of ride height

Product Design:

  • Durable gloss black powder-coated strut and shock bodies
  • Clear zinc-coated threaded portions for optimal corrosion protection
  • Reflex Silver Metallic powder-coated coil springs for durability
  • Red anodized, billet aluminum lower spring seats with locking collars for on-the-car adjustability
  • Integrated bump stops for added protection

Free Upgrade - Turner Motorsport Upgraded Thrust Arm With Pre-installed Monoball Bushings:

Combat the common issues of weak front thrust arm bushings in BMWs with our free Turner Motorsport upgrade. Offering superior durability and nearly instantaneous cornering and braking response.

Features:

  • Ball Joint / Monoball:
    • OEM BMW sealed, greased ball joint for exceptional durability
  • Housing:
    • 6061-T6 anodized housing for excellent corrosion resistance
    • Proprietary Turner designed knurled OD for a perfect fit among different thrust arm bore diameters
  • Bearing Inserts:
    • CNC machined 304ss for a precision fit between the ball joint and the subframe
  • Performance:
    • Nearly instantaneous, crisp steering and braking response
    • Maintenance-free, long-lasting performance
    • Improved road feel without undesirable NVH

Transform your ride into an exceptional driving experience with these essential upgrades suitable for both street and track enthusiasts.

Show More Show Less