BMW Suspension Bushings & Mounts

IRP Performance Rear Polyurethane Shock Mount Kit - E30 E36 E46 Z3 Z4...

T#:401369

Part#: IRPRTM-P

In Stock

$ 110.00 USD

Add to Wish List

Qty

$ 110.00 USD

Add to Wish List

Looking to stiffen up your rear shock mount without going for a solid rear mount? The Polyurethane Rear Performance Strut Mount from IRP will give you the stiffer reinforcement without giving you the typical noise, vibration, and harshness that come with traditional performance strut mounts. The polyurethane also helps with preventing rear shock blowouts, a common problem for stock BMW rear mounts that are paired with stiffer than stock suspension.

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Show More Show Less

IRP Rear Lower Shock Mount Set - E8X E9X Non-M

T#:587022

Part#: IRPRSM-90B

In Stock

$ 195.00 USD

Add to Wish List

Qty

$ 195.00 USD

Add to Wish List

The stock rubber lower shock mounts tend to fail prematurely, especially when subjected to rough track conditions. These IRP lower shock mounts utilize a monoball design that is significantly stronger and helps to eliminate deflection that is caused by soft rubber. Key Benefits: Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance. Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear. Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type). Maintains OE shock position

Show More Show Less

Corteco Rear Shock Mount - E53

T#:393173

Part#: 33526773669

Ships in 1-2 days

$ 55.05 USD

Add to Wish List

Qty

$ 55.05 USD

Add to Wish List

Common failure component producing an audible clunk over bumps

Rear Lower Control Arm Balljoint - Outer

T#:15478726

Part#: 33326792553C

Back Ordered

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

This ball joint is located in the trailing arms. Fits both left & right side.

Rear Shock Mount - Priced Each

T#:594957

Part#: 33521091710

Back Ordered

$ 39.84 USD

Add to Wish List

Qty

$ 39.84 USD

Add to Wish List

The rear shock mounts provide a solid mounting point for your rear suspensions. After many years of use, these mounts can become worn. They generally squeak and can cause rattling when going over bumps or potholes. Replace yours to keep everything quiet and mounted securely.

Show More Show Less

Rear Subframe Bushings/Mounts - Set - Group N Race Rubber - E82, E9X ...

T#:12076

Part#: E9X-GPN-SUBFRAME

In Stock

$ 800.00 USD

Add to Wish List

Qty

$ 800.00 USD

Add to Wish List

The E82 and E90/E92 subframes have an inherent weakness in the rear subframe - the mounts are too soft for the power and torque these cars are capable of. The subframe is the heart of a BMW's rear suspension. As torque is transmitted through the differential and axles and as the tires grip the road, the subframe mounts are working to keeping everything in line. That's a tough task to hold when torque is increased with bigger boost (335i) or even mild tweaks (M3). While the M3 subframe mounts are a great upgrade for the non-M chassis these factory BMW Motorsport subframe mounts go one step further.

These Motorsport/Group N rear subframe bushings are a direct replacement upgrade over the stock mounts. They are rubber to conform to the rules of the Group N racing class - so they are still acceptable for street use as long as extra ride harshness can be tolerated. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well - check out our other Motorsport Race bushings or M3 upgrades.

Price is for the set of 4 mounts.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible

Show More Show Less

Front Upper Strut Mount

T#:5189171

Part#: 31306881930

In Stock at Vendor

$ 146.99

This product was last offered at the strikethrough price on
05-07-2026

$ 137.99 USD

Add to Wish List

Qty

$ 137.99 USD

Add to Wish List

One often overlooked piece is the upper strut bearing and mount. This is the top mount for your struts and provides a solid platform for your front suspension. If worn, the bearings within this mount make noise, there is slop from worn rubber, and it can shorten the life of your shocks. Priced each, but should always be replaced in pairs.

Show More Show Less

Front Upper Control Arm Bushing Set (FCAB) - Group N Race Rubber - E8...

T#:2309

Part#: E9X-GPN-UCAB

Ships in 7 Business Days

$ 413.38 USD

Add to Wish List

Qty

$ 413.38 USD

Add to Wish List

These are the factory BMW Motorsport Group N high performance front upper control arm bushings. These heavy duty rubber bushings are stiffer than the stock bushings to improve steering feel and improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushings. These are for the control arm with the ball joint pointing down, sometimes referred to as the thrust arm or tension strut.

Price is for the pair of bushings.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible

Show More Show Less

IRP Performance Rear Pillow-Ball Shock Mount - E30 E36 E46 Z3 Z4 ...

T#:401368

Part#: IRPRTM-B

Special Order: No Guaranteed ETA

$ 185.99 USD

Add to Wish List

Qty

$ 185.99 USD

Add to Wish List

Want the best performance option in shock tower mounts? IRP has created their pillow-ball rear shock mounts for just this need. These rear shock mounts are designed for use on the track and racing. This set of mounts will help your rear shocks perform the best they can in all conditions. The advantage to using a mount with spherical bearing is that it allows the shock to freely move off axis without side loading the shock shaft like rubber or polyurethane mounts do. Side loading a shock increases stiction and wear which decreases its efficiency. Because these are mounts without an isolator (rubber or polyurethane) to dampen road noise and vibrations we do not recommend them for street cars.

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Show More Show Less

IRP Performance Rear Lower Control Arm Bushing - Inner - 8x, E9x, F87...

T#:2408498

Part#: IRPRSB-9XMB2

Special Order: No Guaranteed ETA

$ 176.99 USD

Add to Wish List

Qty

$ 176.99 USD

Add to Wish List

Enhance road feel and keep your vehicle more planted with these upgraded aluminum bushings. Less play allows for more precise suspension articulation, making for a better performance driving experience.

Show More Show Less

IRP Polyurethane Subframe Bushing Set - 90A - E9X, E8X (non-M) ...

T#:2408491

Part#: IRPRSB-90PU

In Stock

$ 175.00 USD

Add to Wish List

Qty

$ 175.00 USD

Add to Wish List

Replacing your worn stock rubber subframe bushings with IRP's polyurethane bushing set will transform the way your car drives. Stiffer than stock, these bushings still absorb NVH which allows them to be comfortably used on the street without heavily reducing ride quality.

Show More Show Less

Front Differential Bushing - Priced Each

T#:592388

Part#: 33176770788

In Stock

$ 12.94

This product was last offered at the strikethrough price on
05-03-2026

$ 10.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 12.94

This product was last offered at the strikethrough price on
05-03-2026

$ 10.99 USD

Limited Qty Sale

Add to Wish List

Rear Differential Bushing - Priced Each

T#:594920

Part#: 33171134872

In Stock

$ 19.99

This product was last offered at the strikethrough price on
05-07-2026

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

The subframe provides mounting for your rear suspension. The subframe connects to the body with bushings to absorb vibration at all mounting locations. These bushings absorb any vibration that would normally be transmitted to the cabin and keep the subframe solid. They also provide a solid mounting location to keep everything tight.

Show More Show Less

Corteco Front Lower Control Arm Bushing / Hydrobearing - Priced Each ...

T#:27838508

Part#: 31126854729

Ships in 2 Business Days

$ 88.99

This product was last offered at the strikethrough price on
05-08-2026

$ 85.99 USD

Add to Wish List

Qty

$ 85.99 USD

Add to Wish List

When control arm bushings start deteriorating, you may notice increased suspension noise and steering vibrations. This can make the vehicle unstable during cornering and challenging to handle in regular driving. Such issues can lead to premature tire wear due to misalignment and put extra strain on other suspension parts, reducing their lifespan. Installing new control arm bushings can significantly improve the vehicle's handling and prevent damage to other suspension components, promoting overall durability.

Show More Show Less

Rear Toe Arm Bushing - Inner + Outer - Group N Race Rubber - E82, E9X...

T#:12075

Part#: E9X-GPN-TOE

Ships on Nov 12, 2026

$ 279.99 USD

Add to Wish List

Qty

$ 279.99 USD

Add to Wish List

These BMW Motorsport Group N Bushings replace all of the bushings on the factory toe control arm (also known as the track strut). These inner and outer bushings feature a heavy duty rubber that is stiffer than stock. The stiffer bushing reduces deflection and twist in the arm, leading to more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

Sold as a set of 4 - two bushings for each toe arm.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible

Show More Show Less

Rear Guide Rod, Upper Link Bushing - Outer - Group N Race Rubber - E8...

T#:3093

Part#: E9X-GPN-FOLB

Ships on Nov 12, 2026

$ 519.80 USD

Add to Wish List

Qty

$ 519.80 USD

Add to Wish List

These are BMW Motorsport Group N Rear Outer bushings for the Guide Rod and Upper Link (Wishbone). This is a heavy-duty rubber that is stiffer than stock to resist deflection and twist in the arm. You'll have more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

Sold as a set of 4 -
2 Upper Link Outer Bushings,
2 Guide Rod Outer Bushings

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible

Show More Show Less

IRP Aluminum Rear Subframe Bushing Set - E82, E9X (non-M)

T#:2408474

Part#: IRPRSB-90AL

Special Order: No Guaranteed ETA

$ 319.99 USD

Add to Wish List

Qty

$ 319.99 USD

Add to Wish List

Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.

Show More Show Less

IRP Aluminum Rear Subframe Bushing Set - E9X M3, E82 1M

T#:2408494

Part#: IRPRSB-90MAL

Special Order: No Guaranteed ETA

$ 294.99 USD

Add to Wish List

Qty

$ 294.99 USD

Add to Wish List

Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.

Show More Show Less