Showing 18 results for "head gasket"

Sort By:

Packaged by Turner - Corporate Logo
T#:337962
Part#: 11129069861
In Stock
Sale - Save 12% $ 255.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 225.23 USD
Free Shipping
Sale - Save 12%
$ 255.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 225.23 USD
Free Shipping
Full set of replacement gaskets, seals, and o-rings for when you're overhauling the cylinder head from an S52 engine. This set conveniently comes with everything you should need when rebuilding the cylinder head.

This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

Complete Parts List
(click to expand)
BMW p/nQtyDescription
071199631303coolant sensor o-ring,
block coolant connector o-ring
071199632001block coolant drain seal ring
071199632012exhaust manifold plug gasket ring
071199634181timing chain tensioner o-ring
111214051061head gasket
111217389631rear coolant flange gasket
111290705321valve cover gaskets,
main valve cover, spark plug holes
113490644572valve stem seals,
2 packs = 24 valves
113617408401VAN0S unit profile gasket
115312650841thermostat o-ring
115317404371thermostat housing profile gasket
116117161741throttle body-to-manifold o-ring gasket
11611740692intake manifold-to-head profile gasket
116217442522exhaust manifold-to-head gasket plate
121417483981cam position sensor o-ring
135317202511fuel pressure regulator o-ring
135317202521fuel pressure regulator o-ring
136217432991intake air temp sensor o-ring
1364173076712fuel injector o-ring
183017168882exhaust manifold flange gasket
324110935962VAN0S oil line o-ring


This item fits the following BMWs:
1996-1999 E36 BMW M3
1998-2000 Z3 BMW MZ3 Roadster, Coupe
Show More Show Less
Packaged by Turner - Corporate Logo
T#:582218
Part#: 83300493743
In Stock
$ 247.52 USD
Free Shipping
$ 247.52 USD
Free Shipping
BMW recommends valve adjustments every 30k miles on your S54-equipped BMW. We have all the parts you will need to do the job in one discounted package for your BMW E46 M3, Z3, or Z4! Kit includes: 11127832034 x 1 - Valve Cover Gasket 11127831271 x 6 - Spark Plug Hole Gasket 11121437395 x 2 - Valve Cover Seal Washer Grommet 11127830972 x 13 - Valve Cover Nut Grommet VSK4 Wiseco x 1 - Valve Shim Set 83300493743 x 1 - Valve Shim Tool *Click here for valve adjustment instructions* This item fits the following BMWs: 2001-2006 E46 BMW M3, M3 Convertible2001-2002 Z3 BMW M Roadster M Coupe2006-2008 Z4 BMW Z4 M Roadster M Coupe
Show More Show Less
Packaged by Turner - Corporate Logo
T#:636980
Part#: 07129900298KT
Ships in 3 Business Days
$ 103.99

This product was last offered at the strikethrough price on
03-04-2026

$ 96.99 USD
Free Shipping
$ 96.99 USD
Free Shipping
This convenient kit includes all the hardware you need to replace your old, rusted (or broken) exhaust manifold studs on your S54 engine's head.

Packaged by Turner - Corporate Logo
T#:30164593
Part#: 11120034108KT3
In Stock
Sale - Save 8% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.36 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.36 USD
Free Shipping on orders $49 and up

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Valve Cover Spark Plug Tube Gaskets 15 Rubber Grommets/Sealing Washers Ultra-Black RTV Gasket Maker Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:388324
Part#: TEN4649SK2
In Stock
Sale - Save 9% $ 97.14

This product was last offered at the strikethrough price on
03-04-2026

$ 88.02 USD
Free Shipping
Sale - Save 9%
$ 97.14

This product was last offered at the strikethrough price on
03-04-2026

$ 88.02 USD
Free Shipping
This convenient kit includes all the hardware you need to replace your old, rusted (or broken) exhaust manifold studs on your M52tu-family engine's head.

This item fits the following BMWs:
1999-2000  E46 BMW  323i 323ci 328i 328ci
1999-2000  E39 BMW  528i
1999-2000  Z3 BMW  Z3 2.3 Z3 2.8
Show More Show Less
Packaged by Turner - Corporate Logo
T#:20946753
Part#: 11122247447TMSKT
In Stock
Sale - Save 2% $ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 147.60 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 147.60 USD
Free Shipping on orders $49 and up
Eliminate your valve cover oil leaks! This M57 Valve Cover Gasket Replacement Kit includes all of the basic gaskets and seals necessary to replace your valve cover gasket and prevent further oil leaks. Included: Valve Cover Gaskets & Hardware Fuel Injector O-Rings (x6) Fuel Injector Gaskets (x6) Turbo Oil Line Seals (x6)
Show More Show Less

Packaged by Turner - Corporate Logo
T#:348631
Part#: TEN3649SK1KT
Back Ordered
Sale - Save 3% $ 144.34

This product was last offered at the strikethrough price on
06-15-2026

$ 140.01 USD
Free Shipping
Sale - Save 3%
$ 144.34

This product was last offered at the strikethrough price on
06-15-2026

$ 140.01 USD
Free Shipping
This convenient kit includes all the hardware you need to replace your old, rusted (or broken?) exhaust manifold studs on your M50-family engine's head (including M50, M52, S50, S52). The perfect time to preventatively replace your exhaust studs is anytime you remove the manifolds (perhaps to install headers) or are removing the head or complete engine. Kit includes the correct number of OEM studs, copper locking nuts, and also includes two jam-nuts to be used for removing your old studs and installing the new studs. This stud and nut kit Fits 325i, 325is, 328i, 328is, 323is, E36 M3 (3.0 & 3.2 liter), E34 525i (91+), E39 528i, Z3 2.8.

This item fits the following BMWs:
1992-1998  E36 BMW  323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995  E34 BMW  525i
1997-1998  E39 BMW  528i
1997-1998  Z3 BMW  Z3 2.8 M Roadster M Roadster
Show More Show Less
Packaged by Turner - Corporate Logo
T#:211239
Part#: 11127830972-395
In Stock
Sale - Save 14% $ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.74 USD
Free Shipping on orders $49 and up
Sale - Save 14%
$ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.74 USD
Free Shipping on orders $49 and up
Valve Cover Seal Washer. Seals the valve cover bolt to the cam cover. Not required when changing valve cover gasket but good to have as spares. They often get hard and shrink over time, leading to an oil leak or vacuum leak. We sell this as a complete set of 15 grommets with both part numbers included (11127830972 and 11121437395). Individual seals available separately (see below).

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less

Packaged by Turner - Corporate Logo
T#:30164592
Part#: M6211_2253KT
In Stock
$ 138.30

This product was last offered at the strikethrough price on
06-23-2026

$ 137.70 USD
Free Shipping on orders $49 and up
$ 137.70 USD
Free Shipping on orders $49 and up

This complete kit provides all the gaskets you need for a thorough valve cover service.

Is your BMW M60 or M62 V8 engine leaking oil? You’re not alone. Oil leaks are a common issue, but we’ve got the perfect solution to keep your engine running clean and efficient.

The valve cover gasket is essential for keeping engine oil where it belongs – inside the engine. It ensures that your valve train and lifters are properly lubricated, preventing wear and tear. When this gasket fails, oil leaks out, creating a mess and potentially causing damage as it burns on hot engine components. Keep your engine compartment spotless and your BMW performing at its best with our valve cover gasket kit.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:30164630
Part#: 11120034108KT5
In Stock
Sale - Save 22% $ 80.99

This product was last offered at the strikethrough price on
04-01-2026

$ 62.87 USD
Free Shipping on orders $49 and up
Sale - Save 22%
$ 80.99

This product was last offered at the strikethrough price on
04-01-2026

$ 62.87 USD
Free Shipping on orders $49 and up

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Valve Cover Spark Plug Tube Gaskets 15 Rubber Grommets/Sealing Washers Ultra-Black RTV Gasket Maker Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:180875
Part#: TMS180875
In Stock
$ 142.24

This product was last offered at the strikethrough price on
05-07-2026

$ 107.33 USD
Free Shipping
$ 107.33 USD
Free Shipping
Not only will this kit stop most E90 oil leaks, it's the perfect addition for ignition coil or spark plug replacement! Oil leaks - and the damage they can cause - seem to be the worst annoyances on these cars. The biggest source of an oil leak is from the valve cover, followed by the oil filter housing, Valvetronic seal, camshaft seals, and the eccentric shaft sensor seal. Once the oil leaks, and if ignored for an extended time, the oil will contaminate vital electrical sensors. This is especially the case with ignition coils and also the eccentric shaft sensor on the Valvetronic shaft at the top of the cylinder head. During any ignition coil and spark plug replacement take a close look inside for any oil pooling at the bottom. We have been seeing valve cover oil leaks as soon as 40,000 miles. We look for oil leaks on every E90 that comes into our shop.

We have put together this package of valve cover gaskets and other related gaskets and seals for you to fully overhaul the N52 valve cover and put a stop to those pesky oil leaks. This package has the replacement parts for N52 engines built from the 2007 model year and includes:

  • 11127582245 - N52 valve cover gasket set
  • 11127552280 - N52 eccentric shaft sensor seal
  • 11127559699 - N52 Valvetronic gasket

2007 and later N51/N52 engines do not need replacement valve cover bolts, unless the bolts are actually broken off or missing. Unlike the 2006 aluminum hardware, the later parts are steel and not 1-time use.

These are all OEM or OE parts. Replacement of these gaskets and seals is straight-forward but a long process. BMW dealers typically charge for over eight hours of labor. If you have replaced spark plugs before you should be capable of this repair. In addition, there are several other parts to replace while you're in the vicinity: camshaft sensor o-rings, oil filter housing profile gasket, VAN0S solenoids, and the eccentric shaft sensor. These other parts, except the eccentric shaft sensor (see below), are replaceable without removing the valve cover but are more easily accessed during the valve cover work.

Eccentric Shaft Sensor: This is the position sensor that relays the eccentric shaft's position back to the DME. It's located at the front of the engine and is only accessible with the valve cover off . The seal around the sensor can fail and allow oil to blow out from under the cam cover. Oil can then leak into the sensor itself and cause it to fail. Without a functioning sensor your E90 can experience poor running, hesitation, poor performance, jerky shifts, and sluggish response. It's easy to check and see if oil has accumulated inside the sensor: unbolt the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside or even around the sensor itself, plan on replacing this sensor during your next ignition coil, spark plug, and/or valve cover gasket work.

This valve cover kit fits the following BMWs:
2008-2012 E82 BMW 128i
2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E60 BMW 528i 528xi 528i xDrive
2011 F10 BMW 528i
2007-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
10/2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i
Show More Show Less
Packaged by Turner - Corporate Logo
T#:337951
Part#: 11120034108
In Stock
Starting at $ 70.25 USD
Free Shipping
Starting at $ 70.25 USD
Free Shipping
Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M52 engine with single VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

Alternate BMW part numbers:
11129070532

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW M Roadster M Coupe
Show More Show Less


Packaged by Turner - Corporate Logo
T#:214354
Part#: TMS214354
Ships in 3 Business Days
$ 265.32

This product was last offered at the strikethrough price on
03-02-2026

$ 264.92 USD
Free Shipping
$ 264.92 USD
Free Shipping
Replacement valve cover gaskets, including large cover gaskets and seals and grommets. Fits E39 M5 and E52 Z8 with S62 engine.

Kit includes:
11120001269 - Valve Cover Gasket Cyl 1-4
11120001278 - Valve Cover Gasket Cyl 5-8
11121721879 - Valve Cover Seals x 6
11121437395 - Valve Cover Seal Grommet x 20

This item fits the following BMWs:
2000-2003 E39 BMW M5
2000-2003 E52 BMW Z8 Roadster
Show More Show Less
Packaged by Turner - Corporate Logo
T#:30197950
Part#: 11129894803KT2
Ships in 3 Business Days
$ 89.99 USD
Free Shipping on orders $49 and up

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Gasket Set Profile Gasket (HPFP) 2x O-ring (Camshaft Position Sensor) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:337950
Part#: 11120034107
In Stock
Sale - Save 3% $ 98.99

This product was last offered at the strikethrough price on
07-06-2026

Starting at $ 96.34 USD
Free Shipping
Sale - Save 3%
$ 98.99

This product was last offered at the strikethrough price on
07-06-2026

Starting at $ 96.34 USD
Free Shipping
Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M50 (M50TU) engine with VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

Alternate BMW part numbers:
11129070531

This item fits the following BMWs:
1993-1995 E36 BMW 325i 325is 325ic
1995 E36 BMW M3
1993-1995 E34 BMW 525i
Show More Show Less

Packaged by Turner - Corporate Logo
T#:30164665
Part#: 11128648131KT2
Ships in 3 Business Days
$ 150.99

This product was last offered at the strikethrough price on
04-06-2026

$ 145.99 USD
Free Shipping on orders $49 and up
$ 145.99 USD
Free Shipping on orders $49 and up

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Gasket Set - Left & Right High Pressure Fuel Pump Gasket (2) O-Ring Seals (6) Torx Screws (6) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:15744013
Part#: 11127831271-KT
Ships in 7 Business Days
$ 108.83 USD
Free Shipping on orders $49 and up
When these gaskets leak you'll start to smell oil burning when the engine is hot. Also everything downward from the top of the engine becomes coated in a greasy film. The valve cover gasket keeps all of the motor oil inside your engine. Your valve train and lifters get soaked with oil to keep everything lubricated. If the valve cover fails, engine oil seeps and leaks out, running down and burning on the block or cylinder head. Replace it and keep your engine compartment clean and tidy with all the engine oil in the motor. If you are removing your S54 valve cover for valve adjustment, inspection or repairs, you can now get all the gaskets you need in one box. Included are Valve cover gasket Spark plug seals Nut seals Grommets Copper sealing washers
Show More Show Less
Packaged by Turner - Corporate Logo
T#:28869570
Part#: 11127838271TKT
Ships in 8 Business Days
$ 324.99

This product was last offered at the strikethrough price on
03-04-2026

$ 321.99 USD
Free Shipping on orders $49 and up
$ 321.99 USD
Free Shipping on orders $49 and up
If your valve cover is leaking oil or a bad seal is causing vacuum issues and check engine lights, we recommend replacing your seals with this complete valve cover gasket kit! This kit includes all of the main gaskets and o-ring seals used by BMW to seal your valve cover to the cylinder head. Included: Victor Reinz Left & Right Valve Cover Gaskets Genuine BMW Oil Separator Seal O-rings - Two Per Valve Cover Genuine BMW Crankshaft Position Sensor O-Rings - Two Per Valve Cover URO Spark Plug Tubes w/ Gaskets If you are not replacing your valve cover, we also recommend inspecting the grommets found on the valve cover bolts. Over time these can compress or split, leading to insufficient sealing of the valve cover to the cylinder head due to a lack of pressure. BMW does not offer these grommets separately from their individual valve cover bolts, but NRW Design came in clutch with their Silicone Valve Cover Grommet Kit.
Show More Show Less