Maximize your high-performance driving experience with the Fall-Line Motorsports Rear Camber Shim Kit, proudly Made in the USA. Achieve precise rear camber and toe adjustments to enhance your car's handling and responsiveness. Key Features: Rigid camber shims for precise camber adjustments Choose from 5 shim offsets for customization Can be used in normal or flipped orientation for 9 different positions Ensures no alignment changes, even in extreme driving conditions When it comes to high-performance driving, achieving proper rear camber and toe settings can yield significant results. The rear subframe's rigid mounting and minimal rubber bushings in the rear of the car mean that alignment changes have a direct impact on your car's behavior and can be immediately felt. While the factory eccentric suspension bolts offer some adjustment range, they may not provide the perfect solution. Fall-Line's camber shims offer a precise solution. They allow technicians to select from 5 shim offsets for fine-tuning camber settings. These shims can be installed in either the normal or flipped orientation, resulting in 9 different positions with 1mm increments. This level of customization ensures an exact camber setting and guarantees no change in alignment, even in the most demanding driving conditions.
Show More Show Less
From years of competitive race experience, Fall-Line has become synonymous with producing not only championship caliber race cars, but the finest suspension components that help propel them to victory. Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm subframe cup bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement. Designed to replace the rear control/camber arm inner subframe bearings (BMW Part Number: 33326770829) As an added benefit, the spherical bearings will outlast the OEM rubber variants, saving the headache of repeated replacement over your ownership. As with any elimination of suspension bushings, more direct feedback can equate to a slight increase in noise, vibration, and harshness after installing these parts. Product Details: For all G8X / F8X / E9x / E82 M cars DMG Mori 5-Axis CNC machined Full stainless bearing assembly (hats, bearing, housing, spiral locks) Sold in pairs; designed to replace the rear control/camber arm inner subframe bearings (BMW Part Number: 33-32-6-770-829) Made in USA For E9x & 1M models, after install, spot welds recommended on Subframe Cups to secure bearing housing
Show More Show Less
The race toe link kit by Fall Line Motorsports is designed to facilitate rapid adjustments of toe during an alignment, and combined with the tension strut will also enable adjustment of the overall track. Not only does this allow for fine-tuning of wheel fitment, these arms will allow an alignment shop to make quick work of car setup, even simplifying the camber adjustment process as a result. A byproduct of multi-link suspension arrangements is a dynamic change in the car’s alignment settings- when adjusting one attribute like camber, track width, and toe will follow. This is especially true for the G8x and F8x cars, as the original BMW camber eccentric bolt has a major impact on toe as well. Alignments are made faster and simpler when using a set of aftermarket lower arms, enabling the alignment tech to easily reset toe after adjusting camber. The race toe links utilize a unique clamp-style fastener system as seen in BMW’s own tie rods and Porsche Motorsport components, tightening the adjustment arm in place with no stretch of the hardware or change of alignment. Less expensive jam-nut designs limit precision and nearly guarantee an alignment change when the jam-nut is tightened. Laser-cut lockout washers correctly eliminate the original BMW adjustment, eliminating any unwanted movement in the system.
Show More Show Less
These upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine tuning within the full suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions.
Show More Show Less
