Find Parts That Fit Your Vehicle

Garagistic Unclassified

Sort By:
Garagistic E30 X Brace
Garagistic E30 X Brace
Garagistic - Corporate Logo
T#:4154591
Part#: K0707
In Stock
Sale - Save 4% $ 265.00

This product was last offered at the strikethrough price on
05-15-2026

$ 254.11 USD
Free Shipping
Add to Wish List
Sale - Save 4%
$ 265.00

This product was last offered at the strikethrough price on
05-15-2026

$ 254.11 USD
Free Shipping
Add to Wish List
Tighten up your E30 chassis with our completely revamped cross brace! This unit will drastically increase the rigidity and reduce flex by connecting the sub-frame to the frame rails. This is an absolute must-have for E30 Cabrio convertible owners to get rid of the creaks. These cross braces are a direct bolt up that will not conflict with aftermarket sway bars or even extremely lowered E30's. FITMENT All BMW E30 models except for iX BMW E30 318, 320, 325, M3 BMW E30 with 24V swaps (M50 / S52 etc) INSTALL NOTES 100% compatible with Garagistic M60 and M3 swap components. Inlcudes new hardware! This is 100% bolt up and is fully reversible. No drilling or permanent modification is needed to properly install. Be forewarned this x-brace does sit slightly lower then the subframe on the E30 chassis, but it sure as heck can take an absolute beating. Don't be too worried if it scrapes occasionally. Please make sure that your exhaust hangers and motor mounts are in good shape. Old motor mounts tend to lower the motor which could lead to the exhaust touching the cross brace. Healthy motor mounts are a must with this x brace.
Show More Show Less
Garagistic "MTECH 2" Front Lip Splitter - E30
Garagistic "MTECH 2" Front Lip Splitter - E30
Garagistic - Corporate Logo
T#:4168521
Part#: K0161
In Stock
Sale - Save 22% $ 54.00

This product was last offered at the strikethrough price on
05-15-2026

$ 42.27 USD
Add to Wish List
Sale - Save 22%
$ 54.00

This product was last offered at the strikethrough price on
05-15-2026

$ 42.27 USD
Add to Wish List
Add a splitter to your Mtech 2 lip! These E30 Mtech 2 lip splitter only fit the Mtech 2 front spoiler. We have another splitter for the IS lips. These are 3/16" Black ABS plastic with leatherette finish on one side and smooth on the other. CNC Waterjet for great fitment and custom made in the USA! They are 2.8" deep and can be run from .5" to 1.5" deep. Stick them out as far, or in as you want. Shipping does not include screws to install them on your BMW E30 Mtech 2 spoiler, however, recommend drilling small holes and using a combination of small bolts, washers, and nuts to secure the splitter to the spoiler. PLEASE NOTE: MTECH 2 SPOILER IS NOT INCLUDED! THESE ARE BENT TO SHIP INTO A MEDIUM FLAT RATE BOX (SEE PICTURE). THIS IS DONE TO SAVE YOU MONEY (THE COST TO SHIP WOULD TRIPLE IF IT WAS KEPT STRAIGHT)! YOU WILL NEED TO LAY THE SPLITTER OUT IN THE SUN FOR 15MINS FOR IT TO COME BACK TO ITS ORIGINAL SHAPE! BENDING IT IN SHIPPING DOES NOT DAMAGE IT!
Show More Show Less
Garagistic Standard Rear Subframe Bushings - 95A Poly (Track) - BMW E30 RWD
Garagistic Standard Rear Subframe Bushings - 95A Poly (Track) - BMW E...
Garagistic - Corporate Logo
T#:4126635
Part#: K0019-95
In Stock
Sale - Save 35% $ 89.00

This product was last offered at the strikethrough price on
05-03-2026

$ 57.42 USD
Free Shipping
Add to Wish List
Sale - Save 35%
$ 89.00

This product was last offered at the strikethrough price on
05-03-2026

$ 57.42 USD
Free Shipping
Add to Wish List
These are Garagistic's Poly rear subframe bushings for the E30. These bushings keep subframe movement extremely limited, keeping alignment constant and preventing flex/movement seen with stock rubber bushings. These are great for autocross as well as performance E30s that will see track days! These 95A bushings are stiffer than OEM and 80A poly. They mount the rear E30 subframe to the chassis removing most flex from the suspension. Pair these up with Garagistic's poly rear trailing arm bushings to do the job right the first time! These are stiffer than the OEM units which will cause a bit more NVH. Includes everything needed for installation. Includes both bushings as well as aluminum sleeves. These are the "standard height" bushings. If you would like the subframe raised 12mm to compensate for unwanted rear camber, then Garagistic has a raised version of these as well. We highly recommend professional installation as these will require a press to install as well as remove your old bushings. Includes: 2 Standard E30 Rear Subframe Bushings 2 Inner Races Lifetime Warranty! Compatibility: Fits BMW 3 Series E30 (318, 323, 325 & M3) - DOES NOT FIT iX model These replace OEM part number 33311129144 (33-31-1-129-144)
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

  • Unclassified

Brand

Price

$
$

Shipping