AFE Unclassified

This Magnum Force Stage 2 cold air intake system replaces the stock air intake system to deliver cooler, oxygen-rich air to your engine. Installation is easy.

Features:

• powder coated heat shield
• lifetime washable conical air filter
• heat insulating air intake tube
• One-piece housing
• Heat-insulating intake tube
• CAD-designed for maximum flow and velocity
• Pro 5R high-flow filter
• Gains of 17hp & 23lb/ft of torque

Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high-quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.

This part fits the following BMWs:
E82 1 Series Coupe 135i  2011-2013
E88 1 Series Convertible 135i 2011-2013
E9X 335i 2011-2013

The aFe POWER SCORCHER BLUE Power module is the next generation of Plug and Play electronic module technology. It is the fastest way to safely gain significant horsepower, torque and improve drivability without modifying or leaving any trace on the Engine Control Unit (ECU). The SCORCHER BLUE features an LED control switch for in-cabin, on-the-fly power adjustments with different preset modes. With Bluetooth connectivity you can tap into your iOS or android device to make power adjustments, custom tune different power modes, view gauges for engine parameters, upgrade to the latest revision, measure acceleration times and more. The app is downloadable for free on the APP Store or Google Play store.

DETAILS:

• Next generation of plug & play Bluetooth power module
• Dyno tested and produced power increases of +32 HP / +44 lbs. x ft. torque
• Increase turbo boost to improve vehicle performance, efficiency and throttle response
• In-Cabin On-the-Fly Power Adjustments via LED light switch or Smartphone app
• Bluetooth connectivity to your iOS or android smartphone to adjust the power modes, custom tune the power modes or upgrade the device to the latest revision
• 4-power position settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red)
• Does not modify the ECU and leaves no trace (no footprint)

Increases Power and Performance:
The SCORCHER BLUE Power module increases turbo boost and overall vehicle performance producing double-digit power gains on our in-house dyno.

Direct Plug and Play Power:
Designed with factory style connectors, it easily connects to engine sensors for a quick and simple install. The LED control switch can be routed through the firewall into the cabin or connect to the module via Bluetooth with the smartphone app.

On-the-Fly Power Adjustments:
In-Cabin, on-the-fly power adjustments can be made to accommodate your driving needs. Select one of four power settings on the in-cab LED control switch or control the module remotely via the free iOS or android app. The smartphone connects to the module via Bluetooth and displays engine parameters (MAP and TMAP).

4-Power Settings:
This Power module have 4-power settings loaded and identifiable with the LED light on the switch or smartphone app. Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red).

Bluetooth Connectivity:
The SCORCHER BLUE module is Bluetooth 4.0 capable and can connect to most iOS or android device. The Bluetooth connectivity allows the control of the module while being in the vehicle cabin without running any wire through the firewall.

SCORCHER BLUE App:
The aFe POWER SCORCHER BLUE app is free on the APP Store and Google Play store and allows the smartphone device to become a handheld remote for the module. It also displays turbo boost gauges (MAP and TMAP), allows you to customize each power mode, upgrade to the latest revision and even measure 0 to 60 ¼ mile times.

NOTE:
aFe POWER does not recommend using the SCORCHER BLUE module with any other tuners or modules.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

THE EASIEST WAY TO MORE POWER
HP gain = up tp 40 hp
Trq gain = up tp 60 ft-lbs
Plug And Play Engine Harness!
Power Without Worry!

There's no secret to getting additional power from a turbo engine - turn up the boost! But it's easy to take things too far and become "boost drunk". If what you're after is a generous bump in power without worrying about reliability, compromises, or additional modifications the aFe Power Scorcher is perfect for you. We've tried the Scorcher in a number of different BMWs and can report back that it works flawlessly!

Our findings:

• Incredibly simple installation - by the third car we tested with we had the install down to 5 minutes!
• High build quality - it looks and feels like a real part - not homemade like others we have seen
• Immediate power gains - right from our parking lot we could feel the substantial difference
• Affordable power - great bang for the buck

The Scorcher is a plug-and-play tuning module that installs on the engine wiring harness and modifies the signals from the manifold pressure sensors. The new signals are then sent to the engine computer which increases boost based on the modified signal. The power gains are instantly noticeable and the module has been fully engineered to deliver a smooth and reliable power boost over all RPM. aFe developed this module upgrade on their in-house Mustang and Dynojet dynos as well as using them on their own BMWs. There are other products that give more power (for additional cost) but more boost also brings more complications. This is all of the power you need without additional drama and trickery. The Scorcher can be used on its own or combined with other aFe Power products for the total package.

The install is very easy with no cutting or modification to existing components. Unplug the harness from your MAP sensors and plug it into the Scorcher module. Then plug the Scorcher harness into the MAP sensors. Mount the module wherever you wish (Velcro and zip ties included). A blue LED lets you know the module is plugged in correctly and functioning. You can also revert back to stock just as easily! The Scorcher is built with a 0.1% tolerance on critical components. Each connector is an OE type for the best and most secure fitment and they use high-quality wiring with excellent heat and chemical resistance. The module box is aluminum with a hard coat anodize finish. This is way beyond the other 'resistor in a box' products on the market. aFe warranties the complete unit for two years.

This part fits the following BMWs:
F10/F11/F07 550i/ix N63
F12/F13 650i/ix N63  
F01/F02 750i/ix/Li/Lix N63
E70 X5 50i/ix N63
E71 X6 50i/ix N63

aFe Power has released their all new BladeRunner 2-1/4" Intercooler Tubes for the F8X M3 and M4. These boost the power output of the S55 engine by up to +18 Hp and +21 lbs. x ft. torque. This is achieved by creating a much less restrictive air flow design and reducing over-all air turbulence by using mandrel-bent aluminum tubing. These tubes are also power-coated black to help with heat resistance. Includes hardware, silicone couplings, a works directly with your stock intercooler.

Details:

• Up to +18 Hp / +21 lbs. x ft. Torque gains
• Retains factory style turbo outlet o-ring seal made from 6061-T6 Billet Aluminum
• Constructed from 2-1/4" mandrel-bent aluminum tubing for increased flow and reduce turbulence
• Powder-coated wrinkle black for heat resistance
• Hot side tube fitment
• 5-Ply Silicone coupling for strength
• Includes premium stainless steel clamps for a secure fit
• One 1/8" NPT port is provided on each tube for connecting pressure sensors or water methanol injection
• Works with the factory intercooler
• Includes necessary hardware for a hassle-free installation
• Replaces factory plastic intercooler tubes which are prone to breaking over time or under high boost.

Fits the following BMWs:
2015+ F80/82/83 BMW M3 M4 S55 3.0L

HP Gain: +13hp
Trq Gain: +13ft-lbs
Airflow: +28% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The B58 3.0L Turbo benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's highest-flowing filter material and design. The Pro5R filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. This intake is also available in a traditional paper filter media.

Features:

• +13 HP and +13 lbs. x ft. Torque max gains
• Outflows factory intake by up to 28%
• High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Scoop
• CAD-Designed Roto-Molded Intake Tube
• Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance
• Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
• No Cutting or Drilling on factory Parts for Faster Installation

An aftermarket M2 BMW intercooler is a great way to finalize your performance build. This performance intercooler from aFe is exactly what you need to help lower manifold intake air pressure and allow up to 15% more total air volume to flow through your intake, leading to increase numbers in both torque and horsepower!

Features:

• Outflows factory intercooler up to 15%
• Lowers manifold intake air temperature
• 2-1/2" Billet aluminum inlet and outlet for superior strength & durability
• Incorporates the factory style quick connections for intercooler tubes
• 5" Bar and plate core design that is 29% larger than stock
• This intercooler is 100% TIG-Welded by certified craftsmen for strength and durability
• 1/8" NPT ports are provided on the back of the intercooler for connecting pressure sensors or water methanol injection
• Absolutely no cutting or modifications are needed for the installation of this intercooler kit

   

There's no secret to getting additional power from a turbo engine - turn up the boost! But it's easy to take things too far and become "boost drunk". If what you're after is a generous bump in power without worrying about reliability, compromises, or additional modifications the aFe Power Scorcher is perfect for you. We've tried the Scorcher in a number of different BMWs and can report back that it works flawlessly! 

The Scorcher is a plug-and-play tuning module that installs on the engine wiring harness and modifies the signals from the manifold pressure sensors. The new signals are then sent to the engine computer which increases boost based on the modified signal. The power gains are instantly noticeable and the module has been fully engineered to deliver a smooth and reliable power boost over all RPM. aFe developed this module upgrade on their in-house Mustang and Dynojet dynos. There are other products that give more power (for additional cost and complexity) but more boost also brings more complications. This is all of the power you need without additional drama and trickery. The Scorcher can be used on its own or combined with other aFe Power products for the total package. 

The install is very easy with no cutting or modification to existing components. Unplug the harness from your MAP sensors and plug it into the Scorcher module. Then plug the Scorcher harness into the MAP sensors. Mount the module wherever you wish (Velcro and zip ties included). A blue LED lets you know the module is plugged in correctly and functioning. You can also revert back to stock just as easily! The Scorcher is built with a 0.1% tolerance on critical components. Each connector is an OE type for the best and most secure fitment and they use high quality wiring with excellent heat and chemical resistance. The module box is aluminum with a hardcoat anodize finish. This is way beyond the other 'resistor in a box' products on the market. aFe warranties the complete unit for two years. 

This module features on-the-fly power adjustment using a single button controller that effortlessly adjusts from multiple modes of power control, including stock, sport, sport +, and race!

Features: 

• Direct Plug In, 30 minute installation
• +50 HP / +72 lbs. x ft. torque max gains
• Improved throttle response across a broad power band
• Reduced turbo lag
• OE style "all weather" connectors with automotive grade TXL high heat and chemical resistant wire
• Output protection on all signals
• Blue L.E.D. power light
   

Fitment:

2016+ F30/1/4 BMW 330i/ix 340i/ix  w/ B46/58 engine
2016+ F32/3/6 BMW 430i/ix 440i/ix  w/ B46/58 engine
2016+ F22/23 BMW 230i/ix M240i/ix  w/ B46/58 engine