Find Parts That Fit Your Vehicle

BMW Exterior Trim, Body Parts, Aero and Styling

Keep your BMW looking fit and trim with our replacement factory or aftermarket exterior pieces. The appearance of your BMW can be a statement; with our OEM replacements, you can maintain your vehicle's looks and the function of exterior components like mirrors, window regulators, and hood dampers. To upgrade your car with aero components, updated bumpers, or full body kits, visual upgrades from M-Tech, ZHP, CSL, and more are ready to give your BMW the perfect look.

Sub-Categories

Sort By:

Rogue Engineering - Corporate Logo
T#:27105150
Part#: RE.061
In Stock
$ 119.00 USD
Free Shipping
$ 119.00 USD
Free Shipping
You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.
Show More Show Less
Fall Line - Corporate Logo
T#:5581005
Part#: FLM-G8X-3FSKIDB
Ships in 4 Business Days
$ 915.00 USD
Free Shipping
$ 915.00 USD
Free Shipping
The new Fall Line Motorsports oil cooler guards will be constructed from thick stainless steel plate, and will fasten directly to existing frame members on the G80 and G82 cars, spreading any impact across strong structural components. Special care was taken to ensure that the opening in the oil cooler guard matched the shape and size of the existing BMW oil cooler air outlet, ensuring that proper air flow is maintained.
Show More Show Less
Fall Line - Corporate Logo
T#:26038600
Part#: FLM-E9X-3TSTR
Ships in 4 Business Days
$ 139.99 USD
Free Shipping
$ 139.99 USD
Free Shipping

Ensure strength and durability for your BMW with the Fall Line Motorsports tow strap, designed specifically for BMW M cars. Crafted with 5-axis CNC machined stainless steel hardware and a CNC sewn strap, this tow strap offers unparalleled robustness to withstand repeated use. Installation is effortless, with each strap engineered to thread seamlessly into the M3’s bumper reinforcement. Made in the USA, the Fall Line Motorsports tow strap is the highest quality choice for BMW M enthusiasts.

Benefits:

  • High-quality tow strap designed for BMW M cars
  • Crafted with 5-axis CNC machined stainless steel hardware
  • CNC sewn strap for unparalleled robustness
  • Effortless installation into the M3’s bumper reinforcement
  • Made in the USA
Show More Show Less

Fall Line - Corporate Logo
T#:599315
Part#: FLM-F87C-3FSKID-
Ships in 4 Business Days
$ 915.00 USD
Free Shipping
$ 915.00 USD
Free Shipping
S55-equiped cars are incredibly well sorted from a cooling standpoint. Even in a road course environment with extremely high ambient temperatures, the S55 engine tends to operate beautifully, with consistent oil and water temperatures. Although excellent ducting, good core design, strong fans, and other factors all play in to how well a cooling system works, there are ultimately two factors which cannot be circumvented—you must have enough heat exchanger surface area, and you must have enough heat exchangers.
Show More Show Less

Fall Line - Corporate Logo
T#:5580996
Part#: FLM-F8X-3FSKID
Ships in 4 Business Days
$ 850.00 USD
Free Shipping
$ 850.00 USD
Free Shipping
Unfortunately the S55 engine’s oil cooler is precariously exposed. A direct impact to the oil cooler can have catastrophic effects, draining the S55 of all of its oil in seconds, a fact that more than a handful M3 and M4 owners have had to learn in a painfully direct way.
Show More Show Less
Fall Line - Corporate Logo
T#:5581001
Part#: FLM-F8X-3FSKID-B
Ships in 4 Business Days
$ 915.00 USD
Free Shipping
$ 915.00 USD
Free Shipping
Unfortunately the S55 engine’s oil cooler is precariously exposed. A direct impact to the oil cooler can have catastrophic effects, draining the S55 of all of its oil in seconds, a fact that more than a handful M3 and M4 owners have had to learn in a painfully direct way.
Show More Show Less

Fall Line - Corporate Logo
T#:578549
Part#: FLM-F90-3FSKID
Ships in 4 Business Days
$ 1,060.00 USD
Free Shipping
$ 1,060.00 USD
Free Shipping

BMW F90 M5 Oil Cooler Guard Wrinkle Black - Fall Line Motorsports offers exceptional protection for the F90 M5’s oil cooler. While BMW has designed an effective cooling system with advanced ducting, core design, and strong fans, the S63 engine’s oil cooler remains exposed to potential damage from road debris. A direct impact can cause severe damage, draining the engine of oil and leading to significant issues.

The Fall Line Motorsports oil cooler guard is engineered to address this vulnerability. Made from thick stainless steel, this guard attaches directly to existing frame members, dispersing impact across structural components to protect the oil cooler. The guard features an opening that matches the BMW oil cooler’s air outlet, ensuring optimal airflow. Installation is simple, utilizing existing mounting points and retaining the factory plastic shield and ducting.

  • Provides robust protection for the oil cooler against road debris
  • Constructed from thick stainless steel for durability
  • Distributes impact across structural components to prevent damage
  • Maintains optimal airflow with precisely matched openings
  • Easy installation using existing mounting locations
  • Retains factory plastic shield and ducting
  • Made in the USA
Show More Show Less
Fall Line - Corporate Logo
T#:31622549
Part#: FLM-E9X-3TSTR-BL
Ships in 4 Business Days
$ 147.99 USD
Free Shipping
$ 147.99 USD
Free Shipping

Fall Line - Corporate Logo
T#:5581006
Part#: FLM-G8X-3FSKID
Ships in 4 Business Days
$ 850.00 USD
Free Shipping
$ 850.00 USD
Free Shipping
The new Fall Line Motorsports oil cooler guards will be constructed from thick stainless steel plate, and will fasten directly to existing frame members on the G80 and G82 cars, spreading any impact across strong structural components. Special care was taken to ensure that the opening in the oil cooler guard matched the shape and size of the existing BMW oil cooler air outlet, ensuring that proper air flow is maintained.
Show More Show Less

Fall Line - Corporate Logo
T#:5581003
Part#: FLM-F90-3FSKIDR
Ships in 4 Business Days
$ 995.00 USD
Free Shipping
$ 995.00 USD
Free Shipping
The F90 M5 cars are incredibly well sorted from a cooling standpoint. Even in a road course environment with extremely high ambient temperatures, the F90 engine tends to operate beautifully, with consistent oil and water temperatures. BMW M invested a great deal of time, money, and effort into designing a cooling system that worked in nearly every condition.
Show More Show Less