Morimoto's XB HID bulbs set the standard in the aftermarket, offering exceptional performance and value. These bulbs are compatible with both 35W and 55W setups, delivering superior lumens, extended lifespan, longer projection, and enhanced aesthetics.

The XB D2S bulbs feature 100% Philips quartz glass with a high-quality capsule from APL-USA, using premium halide salts from German supplier Messer. This results in luminosity comparable to renowned Osram CBI bulbs at 5000K, ensuring excellent nighttime visibility.

What sets Morimoto's XB bulbs apart is their exceptional longevity. With Austrian-sourced Plansee electrodes, these bulbs maintain 83% of their intensity after 200 hours of use, compared to the Philips bulb's 86%. This level of endurance is unmatched in the aftermarket.

Morimoto's Symmetry-Structure frame ensures precise alignment of the glass capsule, guaranteeing uniform and bright HID output. These XB replacement HID bulbs meet or exceed industry-standard specifications, complying with SAE, DOT, and ECE requirements. They have been rigorously tested for compatibility with various ballasts from Morimoto, Denso, Hella, Bosch, and Koito, passing with ease.

Improved lighting is critical for safety and visibility when off-roading, overlanding, or venturing beyond the pavement. However, finding the right place to mount LED pod lights without custom fabrication can often be a challenge.

The ECS E70 Ditch Light Bracket Set offers a clean, factory-style solution with a fully reversible, vibration-free mounting design. Engineered specifically for the BMW X5 (E70 chassis), these precision-fit brackets position your LED pods low and tight to the hood for optimal light spread and minimal visual obstruction. Installation is simple and seamless—no cutting, drilling, or permanent modifications—thanks to the use of factory hood mounting points and hardware.

Constructed from durable 5052 aluminum and finished in a satin black powder coat, these brackets provide superior corrosion resistance and a refined OEM+ appearance. Each bracket is laser-etched with the ECS Overland logo and includes integrated slots to keep your wiring neatly secured with zip ties.

Features:

Direct, reversible installation using factory hood mounting locations

5052 aluminum construction with satin black powder coat for corrosion resistance

Low-profile design keeps lights within sightline without interference

Laser-etched ECS Overland branding

Integrated slots for clean wire management

Check out the ECS Youtube "Built by Mike" series! The E53 is a more than capable off-road/overland platform. Some of the first modifications you should make to your overlanding vehicle is lighting, you need to be able to see where you are going when venturing off the beaten path. Whether you are driving through your back yard or climbing rocks in the woods, lighting is essential! Get rid of your under utilized factory ash tray(smoking is bad anyways) and replace it with your own personalized control panel for all of your add on electronics. Lighting is crucial and with specific switches tailored to all of the E53 lighting options you have a full suite of switches to match your lighting upgrades. Dont stop at lighting this switch panel can be used for whatever type of electronics your heart desires!

The switch panel fits in your dash perfectly and features 5 switch ports with an added securing point to manage your wires nice and tidy. To make this switch panel so versatile it was designed to accept a standard rocker/toggle switch with a 1.46" x 0.83" mounting hole. Not only does ECS offer switches specific to your X5 lighting additions but they also have blank switches to control universal electronics and blank switch plates for if you do not want to utilize all 5 ports.

Switch Panel install and operation can be seen on this "Built by Mike" video on YouTube: https://youtu.be/N7RiHu8sDAo

Features:

5 switch panel for direct E53 fitment
ABS plastic construction
Matte black to match the interior
Replaces factory ash tray with no modifications
Retains 12v outlet
Design:

The E53 switch panel idea originated from ECS engineer Mike Day when adding a full build out of lighting to his overland X5. The best ideas come from the people who are in the process of achieving a goal and find a solution to help them complete the job, but better! The switch panel was designed off of a 3D scan of the E53 X5 interior and features OEM+ fitment to blend with your interior.

Expand your lighting with this stout mounting system for your E53! Direct fit and aesthetic upgrade for your overland build.

Lighting is a necessity when off-roading, not many times can you add a component that looks this good while also carrying out you utility needs. ECS is now offering a light mounting system for the E53 X5 looks so good we thought about leaving the lights off of it! The light bar features factory mounting with rubber end caps to finish off the installation.

The lighting options with ECS's mounting system are basically endless. The lower bar is 33" in overall width to utilize the factory mounting and features an upper section that spans 24" in diameter. A perfectly proportional setup could include a 24" light bar or up to 4 individual light pods. There are 4 welded and reinforced mounting tabs that span 17" across the bar that are situated 5-3/8" apart from each other which leaves plenty or room for individual lights but can also accommodate almost any light bar you could want.

Common points for mounting aux lighting include the front bumper for long-throw lighting, the roof for high clearance/high perspective lighting, and the base of the A-pillar for ditch lighting. This front mount light bar bracket provides a clean, fully reversible install point for your long throw lighting needs. Fear no ditch, no dark, obstructed, or unknown path through the modern miracle of this beefy front light bar mounting system.

This front light bar mounting system doubles as both a utility for lighting and a rugged aesthetic upgrade. If you are looking to upgrade lighting but are not ready yet, fear not. You can start by adding this awesome light bar mounting system and choose your lighting option later! It looks that good.

Features:

Accommodates 2 large light pods, 4 small light pods, or the light bar of your choosing

Fits Pre-facelift and LCI Models

Optional tow hook attachment (coming soon!)

Design:

Satin black powder coated mild steel tube

Rugged design utilizes factory tow hook mounting locations for sturdy attachment

Exterior coating to match any build

Positioned to allow most lights to clear the hood when opened

Over time, road grime, salt, and moisture take a toll on the factory front headlight leveling sensor rod. The original equipment often corrodes, seizes, and eventually snaps—or worse, binds up and breaks your expensive headlight leveling sensor. With this issue in mind, ECS has engineered a heavy-duty, bulletproof solution designed to outlast the car it’s installed on.

To ensure compliance and long-term durability, flexible polyurethane material was chosen for constructing this replacement sensor rod. Paired with corrosion-resistant stainless steel ball studs, it guarantees smooth articulation and prevents the binding that destroys expensive sensors. Precision-manufactured for a perfect, bolt-on fit, this upgrade requires zero modifications to replace your fragile OEM unit.

This is a direct-fit replacement for Genuine BMW part number 37142283867, restoring proper suspension-to-sensor geometry so your headlights adjust perfectly to changing loads and road conditions.

Upgrade Your Gen 2 MINI with the M7 Speed Bull Bar Kit

Upgrade your Gen 2 MINI with the M7 Speed 100% Bolt-On Bull Bar Kit, now available without the hassle of drilling, welding, or cutting. Crafted for all R55-R59 MINIs, this kit delivers both style and functionality.

The kit features a sturdy 2” diameter main bar equipped with an integrated mount designed to accommodate two large 8” diameter driving lamps. With the included 2” diameter steel bull bar, mounting brackets, and comprehensive hardware, installation becomes a breeze for any DIY enthusiast. Plus, all components come with a sleek powder-coated finish in lightly textured matte black, eliminating the need for painting and ensuring a seamless integration with your vehicle's aesthetics. No modifications necessary – just follow the detailed installation instructions.

Please note that driving lamps are not included with the kit.

Important:

This product reduces front under-fascia clearance by 2.5”. We recommend its use for vehicles with a 2” lift only. While it is compatible with standard ride height cars, drivers should be mindful of the reduced front under-fascia clearance. Access Secret Premium Dashboard