Find Parts That Fit Your Vehicle

Oil Separation & Breather System

Every car has a crankcase vent system that is supposed to suppress oil from making it into the intake ports and combustion chamber. A good functioning system will separate oil from the atmosphere and return it to the oil pan (or collect it in a catch can) while allowing the leftover vapors to burn in the combustion chamber or recirculate through the system. This has always been known as a PCV system (Positive Crankcase Ventilation) but BMW has several other names for it - oil separator, crankcase vent (CCV), and cyclonic separator. Failures in the system will allow raw oil to enter the intake and eventually into the engine itself which can have disastrous effects on engine performance and longevity. As emissions regulations on oil and gas venting have gotten more stringent the PCV systems have gotten more complex and failure prone. And because the CCV is intertwined with other systems you could experience rough running, loss of power, higher oil consumption, misfiring, stalling, or other annoying issues. There is no replacement interval for these so we recommend inspecting your crankcase vent system as part of your regular maintenance routines. Symptoms of a bad crankcase vent are: whitish or yellowish film on the underside of the oil cap, whistling/squealing noises (not caused by a belt), suction on the oil cap that makes it hard to unscrew, large amounts of white smoke from the exhaust, and excessive oil consumption.
Sort By:

Bremmen Oil Separator Kit - Level 1 - E39 E46 E83 Z3 Z4
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:641646
Part#: 11617501566S1
In Stock
$ 81.59 USD
Free Shipping
$ 81.59 USD
Free Shipping
BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate. Replace all the components of the oil separator system together to prevent damage to all the aspects of your engine. Level 1 kit includes the following; Oil separator Hose from oil separator to dipstick tube Hose from oil separator to valve cover Hose from intake manifold back to the connector hose Hose from oil separator up to the intake manifold
Show More Show Less
ECS Tuning N54 PCV Valve Upgraded - BMW N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:4154602
Part#: 090745ECS09
Special Order: No Guaranteed ETA
Sale - Save 25% $ 105.99

This product was last offered at the strikethrough price on
06-14-2026

$ 79.49 USD
Free Shipping
Sale - Save 25%
$ 105.99

This product was last offered at the strikethrough price on
06-14-2026

$ 79.49 USD
Free Shipping
The OEM plastic Positive Crankcase Ventilation (PCV) valve does not hold pressure well, even when brand new. This means that when you are in boost conditions, the highly pressurized PCV valve leaks charged air back into the crankcase. Depending on the condition of your PCV valve, this can range from irritating to dangerous. Additionally, if your valve cover is cracked, loose, or has a bad gasket, you are likely experiencing a pressure leak either internally or externally, as well as potential oil loss issues. ECS Tuning now offers a solid aluminum PCV valve upgrade designed to address these issues by preventing leaks and outlasting the standard BMW-designed PCV! The internal components of this aluminum PCV valve fit tighter than the OE design and can withstand significantly more abuse, perfect for high mileage N54s, N54s that have been tuned, or N54s with upgraded turbos (larger twin or big single turbo builds). This may not be your last PCV Valve, but it will certainly outlast both the Genuine BMW and other common aftermarket alternatives!
Show More Show Less