Find Parts That Fit Your Vehicle

Vanos System

Improper VANOS function will cause reduced power and poor fuel economy. The VANOS system is BMWs version of variable valve timing and can be found on the intake and or exhaust camshafts. The system uses a pair of electrically actuated solenoids that direct the flow of pressurized oil to the VANOS gears. Depending on engine requirements the VANOS system can advance or retard timing as requested by the ECU.

Sort By:

BMW S65 4.0L Vanos Covers 7075 - QTY 4

T#:20749249

Part#: VTT-S65-VANOS-CO

In Stock

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

BMW S65 4.0L Vanos Covers 7075 provide a robust replacement for the factory plastic covers, which are known to fail over time. These high-performance Vanos covers snap on securely, offering a precise fit to eliminate vibration and prevent chafing of the engagement dogs.

High-Strength Construction: Machined from premium 7075 aluminum for superior durability and strength.
Corrosion Resistance: Anodized finish ensures long-lasting protection against corrosion.
Perfect Fitment: Designed for an exact fit to avoid issues such as vibration and chafing.
No Timing Tools Required: Easy installation with no need for engine timing tools.

Show More Show Less

Rogue Engineering Stainless Steel S54 Vanos Line - E46 M3, Z3 M, Z4 M...

T#:567568

Part#: S54VAN

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

Now that BMWs popular S54 engine (found in the 2001-06 BMW M3, 2001-02 MZ3 and 2007-08 MZ4) are getting older, it's important to keep an eye on particular items. One such point is the S54 Vanos oil line. Normally thought of as a worry-free item, it has proven to put the damper on many track days. Rogue's stainless steel braided VANOS line replaces the factory BMW part number 11367837614 (current MSRP from BMW is $128.08!) The high pressure (1200psi) control system of the S54 vanos system is used to ensure responsive and accurate camshaft adjustments. The added complexity of the high oil pressure used on the S54 vanos means more opportunities for failures. Some customers have encountered the high pressure hardline fail at the track, spraying oil all over their engine compartment, ending their day. Rogue Engineering's S54 Vanos Oil Line is built in their Upper Saddle River, NJ facility, and tested to over 3000psi. Using their stainless steel braided hose with the proper banjo fittings, this a direct replacement for the factory line. Like the factory line, the lower portion of the line uses a heat sleeve from additional heat from the VANOS pump itself. Fits the following BMWs: 2001-06 BMW E46 M3 2001-02 BMW MZ3, including coupe and convertible 2007-08 BMW MZ4, including coupe and convertible

Show More Show Less

VAC Motorsports S54 Vanos Hub Upgrade - BMW S54 3.2L

T#:583446

Part#: VAC-VH-S54

In Stock

$ 816.99 USD

Add to Wish List

Qty

$ 816.99 USD

Add to Wish List

VAC's S54 Vanos Hub is designed as a direct replacement for the fragile BMW OE Vanos Hub which typically fails due to a broken drive pin. The VAC Hub has an Upgraded Drive Pin design, which is larger in diameter, as well as more material on the outside wall of the pin. In addition, the hub is made from 4340HT Billet Bar and heat treated to the same BMW OE Rockwell Hardness spec. The upgraded design is not only significantly stronger, but the larger diameter Drive Pins also minimize the huge clearance (approximately 1mm) that was in the original design by BMW and reduces the clearance to 0.2mm. This is critical in helping greatly reduce or eliminate the VANOS noise.

Also, this upgraded design eliminates the need for modifying the Pump Ring or having to buy a replacement, which further saves you money!!!

Show More Show Less

BMW S54 3.2L VANOS Elimination Kit - Full Kit | VAC Motorsports ...

T#:18070230

Part#: VAC-VEK-S54

Ships on Sep 1, 2026

$ 529.99 USD

Add to Wish List

Qty

$ 529.99 USD

Add to Wish List

BMW S54 3.2L VANOS Elimination Kit - Full Kit | VAC Motorsports is designed to replace the original VANOS unit on the S54 engine, offering a comprehensive solution for performance enthusiasts and racers. Engineered and tested by VAC Motorsports, this kit allows for precise camshaft timing adjustments and is ideal for those using standalone ECUs that do not control the dual-VANOS system.

Enhanced Performance: Allows for full adjustment of camshaft timing, enabling optimization of camshafts for maximum performance.
Engineered for Racing: Ideal for racing applications and standalone ECU setups that do not manage the dual-VANOS unit.
High-Quality Components: Includes a billet 6061-T6 anodized black VANOS elimination plate and adjustable camshaft hubs made from durable 4140 alloy steel.
Complete Kit: Comes with a block-off plug, using OE O-rings to replace the original oil supply valve, and all necessary hardware for installation.
Versatile Fit: Compatible with all S54 engines and those swapped into other chassis.

Kit Includes:

Billet 6061-T6 Anodized Black VANOS Elimination Plate
(2) Adjustable Camshaft Hubs made from 4140 Alloy Steel
Block OFF Plug – Uses OE O-Rings and replaces OE Oil Supply Valve
All Required Hardware
Installation Instructions

NOTE: ONLY COMPATIBLE WITH AFTERMARKET ECUs

Show More Show Less

VAC S50B32 Euro FULL VANOS Elimination Kit with Adjustable Cam Gears ...

T#:38195383

Part#: VAC-VEK-S50B32

Ships on Sep 1, 2026

$ 629.99 USD

Add to Wish List

Qty

$ 629.99 USD

Add to Wish List

This unit is designed for the S50B32 Euro Engines ONLY!

Project Cars

SELECT YOUR BMW

Vanos System

BMW S65 4.0L Vanos Covers 7075 - QTY 4

Rogue Engineering Stainless Steel S54 Vanos Line - E46 M3, Z3 M, Z4 M...

VAC Motorsports S54 Vanos Hub Upgrade - BMW S54 3.2L

BMW S54 3.2L VANOS Elimination Kit - Full Kit | VAC Motorsports ...

VAC S50B32 Euro FULL VANOS Elimination Kit with Adjustable Cam Gears ...

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results