Find Parts That Fit Your Vehicle

Vanos System

Improper VANOS function will cause reduced power and poor fuel economy. The VANOS system is BMWs version of variable valve timing and can be found on the intake and or exhaust camshafts. The system uses a pair of electrically actuated solenoids that direct the flow of pressurized oil to the VANOS gears. Depending on engine requirements the VANOS system can advance or retard timing as requested by the ECU.

Sort By:

Rogue Engineering Stainless Steel S54 Vanos Line - E46 M3, Z3 M, Z4 M...

T#:567568

Part#: S54VAN

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

Now that BMWs popular S54 engine (found in the 2001-06 BMW M3, 2001-02 MZ3 and 2007-08 MZ4) are getting older, it's important to keep an eye on particular items. One such point is the S54 Vanos oil line. Normally thought of as a worry-free item, it has proven to put the damper on many track days. Rogue's stainless steel braided VANOS line replaces the factory BMW part number 11367837614 (current MSRP from BMW is $128.08!) The high pressure (1200psi) control system of the S54 vanos system is used to ensure responsive and accurate camshaft adjustments. The added complexity of the high oil pressure used on the S54 vanos means more opportunities for failures. Some customers have encountered the high pressure hardline fail at the track, spraying oil all over their engine compartment, ending their day. Rogue Engineering's S54 Vanos Oil Line is built in their Upper Saddle River, NJ facility, and tested to over 3000psi. Using their stainless steel braided hose with the proper banjo fittings, this a direct replacement for the factory line. Like the factory line, the lower portion of the line uses a heat sleeve from additional heat from the VANOS pump itself. Fits the following BMWs: 2001-06 BMW E46 M3 2001-02 BMW MZ3, including coupe and convertible 2007-08 BMW MZ4, including coupe and convertible

Show More Show Less

Slon Workshop E9X M3 (S65) Vanos Covers Kit

T#:35053681

Part#: SLON-E9XM-5VCK

In Stock

$ 390.00 USD

Add to Wish List

Qty

$ 390.00 USD

Add to Wish List

Enhance the durability of your BMW E9X M3 (S65) engine with the Slon Workshop Vanos Covers Kit. The OE plastic vanos cover is known for cracking and failure, posing a risk of plastic debris in the engine. Replace it with the IND Slon upgraded vanos covers for added peace of mind, preventing potential issues and ensuring the longevity of your engine.

Vanos Covers Kit for BMW E9X M3 (S65)
Upgraded design for enhanced durability
Prevents cracking and failure of the OE plastic vanos cover
Reduces the risk of plastic debris in the engine
Provides an extra level of peace of mind for engine safety

Show More Show Less

Slon Workshop E9X M3 (S65) Vanos Covers Kit - Black Anodized ...

T#:15544970

Part#: E9XVANOSBA

Ships in 3 Business Days

$ 438.99 USD

Add to Wish List

Qty

$ 438.99 USD

Add to Wish List

The plastic OE vanos cover in your engine is commonly prone to cracking and failure leaving plastic pieces inside your engine and leading to catastrophic failure. Replace them with these IND Slon upgraded vanos covers to prevent further issues giving you and your engine an extra level of peace of mind.

Show More Show Less

VAC Motorsports S54 Vanos Hub Upgrade - BMW S54 3.2L

T#:583446

Part#: VAC-VH-S54

In Stock

$ 816.99 USD

Add to Wish List

Qty

$ 816.99 USD

Add to Wish List

VAC's S54 Vanos Hub is designed as a direct replacement for the fragile BMW OE Vanos Hub which typically fails due to a broken drive pin. The VAC Hub has an Upgraded Drive Pin design, which is larger in diameter, as well as more material on the outside wall of the pin. In addition, the hub is made from 4340HT Billet Bar and heat treated to the same BMW OE Rockwell Hardness spec. The upgraded design is not only significantly stronger, but the larger diameter Drive Pins also minimize the huge clearance (approximately 1mm) that was in the original design by BMW and reduces the clearance to 0.2mm. This is critical in helping greatly reduce or eliminate the VANOS noise.

Also, this upgraded design eliminates the need for modifying the Pump Ring or having to buy a replacement, which further saves you money!!!

Project Cars

SELECT YOUR BMW

Vanos System

Rogue Engineering Stainless Steel S54 Vanos Line - E46 M3, Z3 M, Z4 M...

Slon Workshop E9X M3 (S65) Vanos Covers Kit

Slon Workshop E9X M3 (S65) Vanos Covers Kit - Black Anodized ...

VAC Motorsports S54 Vanos Hub Upgrade - BMW S54 3.2L

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results