Polycarbonate window glass reduces weight dramatically for racing and time attack vehicles. Furthermore, they are sometimes a requirement depending on what class and organization you race with because of the way they break in the event of a crash. Be sure to check all local traffic laws and safety regulations before installing these in a street driven vehicle.
This category contains parts that fit the following chassis:
These polycarbonate slider kits are designed to fit all cars with polycarbonate windows. This DIY kit requires you to cut the opening and drill the holes in your polycarbonate windows.
2 piece poly-carbonate motorsport side window kit to fit the BMW E46 Coupe only. Kit includes a passenger side quarter window and a driver side quarter window. - Manufactured from high-quality Lexan UV protected polycarbonate - Approximately 50% weight saving compared to glass - Windows are CNC profile cut ready to fit - Windows with NACA duct holes have been pre-drilled for simple installation. - All windows have a small frame/channel pre-cut to simplify painting. - NACA duct part numbers, see below. (NACA ducts not included)
Show More Show Less
Condor's "rivet-on" design can be installed with rivets or riv-nuts. You WILL need to fabricate 2 straps to keep the window from flexing at speed. Manufactured from high-quality UV protected polycarbonate Approximately 50% weight saving compared to glass Windows are CNC profile cut ready to fit
Show More Show Less
2 piece poly-carbonate motorsport side window kit to fit the BMW E36 Coupe only. Kit includes a passenger side quarter window and a driver side quarter window. - Manufactured from high-quality Lexan UV protected polycarbonate - Approximately 50% weight saving compared to glass - Windows are CNC profile cut ready to fit - Windows with NACA duct holes have been pre-drilled for simple installation. - All windows have a small frame/channel pre-cut to simplify painting. - NACA duct part numbers, see below. (NACA ducts not included)
Show More Show Less
Reduce weight in your track car! Condor's polycarbonate windows are designed to fit in e46 sedans that have had the window mechanisms removed. These flat windows slide into the OEM window channels and are held in place using the included pins. The small windows for the rear door need to be riveted inside the stock window frame. Keep the rain and dust out of your race car when towing, at the track or just sitting outside of the shop. 6 piece polycarbonate motorsport door window kit to fit the BMW E46 sedan only. - 2x Front Door Windows (Driver and Passenger) - 2x Rear Door Windows (Left and Right) inc two small quarter windows - Manufactured from high quality Makrolon UV protected polycarbonate - Approximately 50% weight saving compared to glass - Windows are CNC profile cut ready to fit - Includes 8 pins to keep them in place.
Show More Show Less
Polycarbonate rear 1/4 windows for E30 coupes. Manufactured from high-quality UV protected polycarbonate Approximately 50% weight savings compared to glass Windows are CNC profile cut - ready to fit Windows with NACA duct holes have been pre-drilled for simple installation. NACA duct part numbers, see below. (NACA ducts not included)
Show More Show Less
Keep the rain and dust out of your race car while at the track or while sitting outside of the shop. Condor's two-piece polycarbonate motorsport window kit includes both driver and passenger side windows. Designed for an e36 coupe that no longer has door glass or associated hardware. The flat windows slide into the OEM window channel in the door and are held in place using the included pins. Kit features: Manufactured from high-quality Lexan UV protected polycarbonate Approximately 50% weight saving compared to glass Windows are CNC profile cut ready to fit Includes four pins to keep them in place.
Show More Show Less
Keep the rain and dust out of your race car when towing, at the track or just sitting outside of the shop. These are designed to fit in e30 sedans that have had the window mechanisms removed. These flat windows slide into the OEM window channels and are held in place using the included pins. Kit Features: Manufactured from high-quality Lexan UV protected polycarbonate Approximately 50% weight saving compared to glass Windows are CNC profile cut ready to fit Includes pins to keep them in place.
Show More Show Less
Polycarbonate rear windshield. Condor's "rivet-on" design can be installed with rivets or riv-nuts. You WILL need to fabricate 2 straps to keep the window from flexing at speed. - Manufactured from high-quality UV protected polycarbonate - Approximately 50% weight saving compared to glass - Windows are CNC profile cut ready to fit
Show More Show Less
Keep the rain and dust out of your race car while at the track or while sitting outside of the shop. Condor's Rear polycarbonate motorsport window kit includes both driver and passenger-side rear windows and rear quarter windows. Designed for an e36 sedan that no longer has door glass or associated hardware. The flat windows slide into the OEM window channel in the door and are held in place using the included pins. Kit features: 2x Rear Door Side Windows (Left and Right) including two small quarter windows Manufactured from high-quality Lexan UV-protected polycarbonate Approximately 50% weight saving compared to glass Windows are CNC profile cut ready to fit Includes four pins to keep them in place. Thickness - .1875 (3/16")
Show More Show Less
Reduce weight in your track car! Condor's polycarbonate windows are designed to fit in e36 sedans that have had the window mechanisms removed. These flat windows slide into the OEM window channels and are held in place using the included pins. The small windows for the rear door need to be bolted inside the stock window frame. Keep the rain and dust out of your race car when towing, at the track or just sitting outside of the shop. Kit features: 2x Front Door Windows (Driver and Passenger) 2x Rear Door Windows (Left and Right) inc two small quarter windows Manufactured from high-quality Makrolon UV protected polycarbonate Approximately 50% weight saving compared to glass Windows are CNC profile cut ready to fit Includes 8 pins to keep them in place.
Show More Show Less
Keep the rain and dust out of your race car when towing, at the track or just sitting outside of the shop. These are designed to fit in an e30 with the window mechanism removed. These flat windows slide into the OEM window channels and are held in place using the included pins. Kit Features: Manufactured from high-quality Lexan UV protected polycarbonate Approximately 50% weight saving compared to glass Windows are CNC profile cut ready to fit Includes 4 pins to keep them in place.
Show More Show Less
Polycarbonate rear 1/4 windows for E30 coupes. Manufactured from high-quality UV protected polycarbonate Approximately 50% weight savings compared to glass Windows are CNC profile cut - ready to fit Windows with NACA duct holes have been pre-drilled for simple installation. NACA duct part numbers, see below. (NACA ducts not included): Single - Pegasus Auto Part No. 3628 Dual - Pegasus Auto Part No. 3629
Show More Show Less
Polycarbonate rear 1/4 windows for E30 coupes. Manufactured from high-quality UV protected polycarbonate Approximately 50% weight savings compared to glass Windows are CNC profile cut - ready to fit Windows with NACA duct holes have been pre-drilled for simple installation. Rivet on windows have a small frame/channel pre-cut to simplify painting. NACA duct part numbers, see below. (NACA ducts not included)
Show More Show Less
2 piece poly-carbonate motorsport side window kit to fit the BMW 2002 Coupe only. Kit includes a passenger side quarter window and a driver side quarter window. Manufactured from high-quality Lexan UV protected polycarbonate Approximately 50% weight saving compared to glass Windows are CNC profile cut ready to fit Windows with NACA duct holes have been pre-drilled for simple installation. NACA duct part numbers, see below. (NACA ducts not included)
Show More Show Less
