Valve Cover

Valve Cover Gasket Overhaul Kit - E9X 328i, E60 528i, E83 X3 3.0i/si,...

T#:180875

Part#: TMS180875

In Stock

$ 142.24

This product was last offered at the strikethrough price on
05-07-2026

$ 107.33 USD

Add to Wish List

Qty

$ 107.33 USD

Add to Wish List

Not only will this kit stop most E90 oil leaks, it's the perfect addition for ignition coil or spark plug replacement! Oil leaks - and the damage they can cause - seem to be the worst annoyances on these cars. The biggest source of an oil leak is from the valve cover, followed by the oil filter housing, Valvetronic seal, camshaft seals, and the eccentric shaft sensor seal. Once the oil leaks, and if ignored for an extended time, the oil will contaminate vital electrical sensors. This is especially the case with ignition coils and also the eccentric shaft sensor on the Valvetronic shaft at the top of the cylinder head. During any ignition coil and spark plug replacement take a close look inside for any oil pooling at the bottom. We have been seeing valve cover oil leaks as soon as 40,000 miles. We look for oil leaks on every E90 that comes into our shop.

We have put together this package of valve cover gaskets and other related gaskets and seals for you to fully overhaul the N52 valve cover and put a stop to those pesky oil leaks. This package has the replacement parts for N52 engines built from the 2007 model year and includes:

11127582245 - N52 valve cover gasket set
11127552280 - N52 eccentric shaft sensor seal
11127559699 - N52 Valvetronic gasket

2007 and later N51/N52 engines do not need replacement valve cover bolts, unless the bolts are actually broken off or missing. Unlike the 2006 aluminum hardware, the later parts are steel and not 1-time use.

These are all OEM or OE parts. Replacement of these gaskets and seals is straight-forward but a long process. BMW dealers typically charge for over eight hours of labor. If you have replaced spark plugs before you should be capable of this repair. In addition, there are several other parts to replace while you're in the vicinity: camshaft sensor o-rings, oil filter housing profile gasket, VAN0S solenoids, and the eccentric shaft sensor. These other parts, except the eccentric shaft sensor (see below), are replaceable without removing the valve cover but are more easily accessed during the valve cover work.

Eccentric Shaft Sensor: This is the position sensor that relays the eccentric shaft's position back to the DME. It's located at the front of the engine and is only accessible with the valve cover off . The seal around the sensor can fail and allow oil to blow out from under the cam cover. Oil can then leak into the sensor itself and cause it to fail. Without a functioning sensor your E90 can experience poor running, hesitation, poor performance, jerky shifts, and sluggish response. It's easy to check and see if oil has accumulated inside the sensor: unbolt the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside or even around the sensor itself, plan on replacing this sensor during your next ignition coil, spark plug, and/or valve cover gasket work.

This valve cover kit fits the following BMWs:
2008-2012 E82 BMW 128i
2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E60 BMW 528i 528xi 528i xDrive
2011 F10 BMW 528i
2007-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
10/2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less

Valve Cover Kit - N55

T#:5376284

Part#: 11127570292TKT

In Stock

Sale - Save 5% $ 320.99

This product was last offered at the strikethrough price on
05-03-2026

$ 304.52 USD

Add to Wish List

Qty

Sale - Save 5%

$ 320.99

This product was last offered at the strikethrough price on
05-03-2026

$ 304.52 USD

Add to Wish List

If your valve cover has become cracked or warped, replace it with this Hamburg Tech cover from Turner Motorsport to prevent leaks and further valvetrain damage. Replace your leaking valve cover to keep your oil inside the engine, where it belongs. Includes everything needed to install a new valve cover: Valve cover Gasket flange Crank case vent hose Hardware

Show More Show Less

N54 Valve Cover upgrade kit

T#:6196925

Part#: 11127565284TKT

In Stock

Sale - Save 30% $ 423.99

This product was last offered at the strikethrough price on
05-03-2026

$ 296.23 USD

Add to Wish List

Qty

Sale - Save 30%

$ 423.99

This product was last offered at the strikethrough price on
05-03-2026

$ 296.23 USD

Add to Wish List

You want to keep your N54 running properly to enjoy the drive and justify the costs associated with owning an N54 car! This kit has a replacement valve cover for your current cover that is worn or damaged. Along with replacing the valve cover this kit includes an upgraded pcv valve. This upgraded PCV valve uses machined metal components in place of the stock plastic parts, resulting in a more durable part. While replacing your valve cover a common failure is one of the blow by pcv vent hose cracks and is also INCLUDED in the kit for a full proof valve cover upgrade service! Replace and upgrade your valve cover at the same time, with the VTT PCV valve for longer PCV life and better flow.

Show More Show Less

Valve Cover Gasket Set - E36 E39 Z3 with M52

T#:337951

Part#: 11120034108

In Stock

Starting at $ 70.25 USD

Add to Wish List

Starting at $ 70.25 USD

Add to Wish List

Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M52 engine with single VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

Alternate BMW part numbers:
11129070532

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW M Roadster M Coupe

Show More Show Less

Valve Cover Gasket Set - E39 M5, E52 Z8

T#:214354

Part#: TMS214354

Ships in 3 Business Days

$ 265.32

This product was last offered at the strikethrough price on
03-02-2026

$ 264.92 USD

Add to Wish List

Qty

$ 264.92 USD

Add to Wish List

Replacement valve cover gaskets, including large cover gaskets and seals and grommets. Fits E39 M5 and E52 Z8 with S62 engine.

Kit includes:
11120001269 - Valve Cover Gasket Cyl 1-4
11120001278 - Valve Cover Gasket Cyl 5-8
11121721879 - Valve Cover Seals x 6
11121437395 - Valve Cover Seal Grommet x 20

This item fits the following BMWs:
2000-2003 E39 BMW M5
2000-2003 E52 BMW Z8 Roadster

Show More Show Less

Valve Cover Screws Kit

T#:7844460

Part#: 11121487179KT11

In Stock

$ 157.61 USD

Add to Wish List

Qty

$ 157.61 USD

Add to Wish List

This collar screw is needed to attach the valve cover and seal it to the engine head. Finally be able to replace your hardware before its too late and the valve cover is stuck on and the hardware needs drilled out. Included in this kit to replace the ru

Show More Show Less

Valve Cover Gasket Set - E36 E34 with M50 VANOS

T#:337950

Part#: 11120034107

In Stock

Sale - Save 3% $ 98.99

This product was last offered at the strikethrough price on
07-06-2026

Starting at $ 96.34 USD

Add to Wish List

Sale - Save 3%

$ 98.99

This product was last offered at the strikethrough price on
07-06-2026

Starting at $ 96.34 USD

Add to Wish List

Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M50 (M50TU) engine with VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

Alternate BMW part numbers:
11129070531

This item fits the following BMWs:
1993-1995 E36 BMW 325i 325is 325ic
1995 E36 BMW M3
1993-1995 E34 BMW 525i

Show More Show Less

ECS Carbon Fiber Engine Top Cover - MINI F55, F56, F57, F54, F60 Pre-...

T#:24145968

Part#: 11128601635KT

In Stock

$ 326.99 USD

Add to Wish List

Qty

$ 326.99 USD

Add to Wish List

The ECS Carbon Fiber Engine Cover creates a visual underhood transformation like no other! This engine cover is made from authentic, hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin. It is finished in a durable gloss clear coat for UV protection and added durability. If you're looking for a sure-fire way to make your engine bay stand out, look no further than this high-performance aesthetic carbon fiber engine cover!

Engine oil cap functionality is retained so you can easily top-off your engine oil between services without engine cover removal.

The ECS Carbon Fiber Engine Cover installs just like the factory component. Retaining the exact locations of the OE rubber mounts ensures the integrated mounting grommets snap right over the factory ball studs. The ECS Engine Cover can then be installed or removed just like the factory cover without any further tools needed.

Features:

Race-inspired carbon fiber styling High-quality pre-impregnated cloth and epoxy resin construction Finished with a durable UV-resistant high gloss clear coat Mirrors the unique contours of the factory engine cover to ensure proper clearance of top-end componentry Retains the factory oil filler cap location for easy top-ups and oil changes Transform your engine bay in a matter of minutes with this high-quality aesthetic piece from ECS Tuning!

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Valve Cover Gasket Overhaul Kit - E9X 328i, E60 528i, E83 X3 3.0i/si,...

Valve Cover Kit - N55

N54 Valve Cover upgrade kit

Valve Cover Gasket Set - E36 E39 Z3 with M52

Valve Cover Gasket Set - E39 M5, E52 Z8

Valve Cover Screws Kit

Valve Cover Gasket Set - E36 E34 with M50 VANOS

ECS Carbon Fiber Engine Top Cover - MINI F55, F56, F57, F54, F60 Pre-...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results