Find Parts That Fit Your Vehicle

Oiling System

Tasked with keeping everything properly lubricated, the oiling system is one of the most if not THE most fundamental parts of the engine. Make sure that everything is in good working order and flowing properly to ensure your engine has a long and trouble-free service life.

Sub-Categories

Sort By:

Advanced Auto Fabrication - Corporate Logo
T#:7624643
Part#: 116183
In Stock
$ 190.00 USD
Free Shipping
$ 190.00 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.
Show More Show Less
Advanced Auto Fabrication - Corporate Logo
T#:7593110
Part#: 11636
In Stock
$ 150.00 USD
Free Shipping
$ 150.00 USD
Free Shipping
This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. 10 gated holes control oil slosh in the sump. A must have for all track cars. **Note: Requires Welding to install. Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars.
Show More Show Less
Radium Engineering - Corporate Logo
T#:577808
Part#: 20-0373
In Stock at Vendor
$ 259.99 USD
Free Shipping
$ 259.99 USD
Free Shipping
Oil catch cans prevent elevated oil blow by caused by aggressive driving. The Radium Engineering catch can uses a closed loop system and is emissions and track legal, and by not venting to atmosphere avoids any oil smells from getting into the cabin. Kit includes Billet catch can Mounting bracket 10AN hose fittings and adapters 5/8" PCV hose Mounting hardware
Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7608871
Part#: 116120
Ships in 2 Business Days
$ 195.99 USD
Free Shipping
$ 195.99 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. When you’re racing with an M54 and you want to control oil burn, installing an external catch tank is a great way to do it. The stock oil separator allows oil into the intake at sustained high RPM. This causes the intake runners, piping, and throttle body to be contaminated with oil and carbon build up. Excessive carbon build-up on valves, piston crowns, combustion chambers and spark plugs. This also increases the chance of detonation and power loss. Includes all hardware and parts to make installation easy!
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.
Advanced Auto Fabrication - Corporate Logo
T#:7608876
Part#: 116205
In Stock
$ 25.00 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's M20 oil level block off plate for the E30 eliminates the OEM oil level sensor. On the M20 there is an oil level sensor on the oil pan that can be deleted in dedicated motorsports cars. This will allow you to remove a small bit of weight by getting rid of the oil level sender and associated wiring which goes all the way up to the overhead panel. By deleting the plug what you are also doing is eliminating another point of failure and clutter in the engine bay. Includes: Oil level block off plate Two locking nuts Two washers Shown on pan for reference.
Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7593089
Part#: 11619
In Stock at Vendor
$ 130.00 USD
Free Shipping on orders $49 and up
$ 130.00 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. Ten gated holes control oil slosh in the sump. A must have for all track cars. **Note: welding is required to install. Photos of installed baffle for reference.
Show More Show Less
Advanced Auto Fabrication - Corporate Logo
T#:7624656
Part#: 116184
Ships in 3 Business Days
$ 230.00 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.
Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7608845
Part#: 11652
In Stock at Vendor
$ 155.00 USD
Free Shipping
$ 155.00 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's own M54 E46 Oil Pan Baffle. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. This baffle keeps the oil at the pick up better than others on the market. This pan features a tight fit with an extra tab on the front to keep oil from exiting under braking. Six gated holes control oil slosh in the sump. A must have for all track cars. Features and Benefits Track-proven to prevent oil starvation Directional trap door baffling completely that closes off the oil pump pickup for maximum protection against oil starvation during turning or acceleration Baffle plate with drain-back slots help accelerate return of oil to the bottom of the sump while also preventing oil slosh and reducing oil consumption Reduces the risk of oil starvation when oil levels are low Works with the factory cast aluminum oil pan, which is considered a structural member of the engine block and is less prone to failure or leaking than aftermarket sheet metal pans Light-weight aluminum construction Made In the USA **Note: Requires welding to install. Photos of installed baffle for reference.
Show More Show Less

Baum Tools - Corporate Logo
T#:7244403
Part#: B2212825K
Ships in 5 Business Days
$ 152.97 USD
Free Shipping
$ 152.97 USD
Free Shipping
Designed to hold the balance shaft in position when removing/installing the oil pump, chain, and sprocket on BMW N20/N26 4-cylinder engines. Comparible to BMW factory tool #83302318117 & 83302212825
Show More Show Less
Rally Road - Corporate Logo
T#:401463
Part#: B015-8BL
Ships on Sep 1, 2026
$ 243.99 USD
Free Shipping
$ 243.99 USD
Free Shipping
Rally Road - Corporate Logo
T#:401511
Part#: RROCCK
Ships on Sep 1, 2026
Starting at $ 243.99 USD
Free Shipping
Starting at $ 243.99 USD
Free Shipping

Rally Road Productions, Inc. is a team supported by a group of people with great abilities in their area of expertise. From the "web guy" and driving instructor friends, to owners of various machine shops, they have surrounded ourselves with people that can be trusted to create and manufacture quality products. This is the key to ensuring everything that they sell will perform as it was intended. The goal is to increase customer satisfaction and make the customization or performance enhancement of your vehicle a more enjoyable venture.

This oil cooler system is race tested and proven to outflow the euro M3 oil filter housing. Additionally, this particular system uses a sealing mechanism to direct the oil flow through the cooler lines and then through the oil filter.  Other cooler caps do not provide this seal and therefore the external oil coolers and lines act as a "balloon".  The lines and cooler are pressurized, but oil does not flow through them.  Flowing oil means it is being cooled and not just acting as an external reservoir.

Flow testing reveals that the oil cooler cap will outflow the Euro M3 Oil Filter Housing by more than 80% at the same, pressure, RPM, and oil temperature. In the upper RPM range, there is nearly a 100% improvement in flow from the RallyRoad oil cooler cap when compared to the Euro M3 oil filter housing.  This is a massive improvement over OE and is a worthwhile upgrade, especially in engines that see severe duty.

Features:

  • -8AN o-ring ports to provide a leak free fitting without the use of Teflon tape or sealant used by other oil cooler caps.
  • Viton o-rings are used throughout to maintain function and sealing in a high-temperature oil environment.
  • Use of the stock filter cap bolt to reduce cost and simplify installation.
  • An internal sealing mechanism to direct oil flow through the oil cooler and through the filter.
  • 1/8" NPT side port for external oil pressure gauge.

Kit Includes:

  • Oil filter cap with fittings
  • Oil filter sealing ring
  • BMW MANN Oil Filter and gasket

This part fits the following BMWs
1992-1999 E36 323i 325i 325is 328i 328is

Show More Show Less


Schwaben - Corporate Logo
T#:378500
Part#: 006653SCH01A
In Stock
Sale - Save 18% $ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 27.99 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 27.99 USD
Free Shipping on orders $49 and up

The Schwaben oil filter is comparable with several factory filter sockets listed as 74mm - 14 flute.

Features:

  • 27mm hex drive to be used with 27mm wrench or socket
  • 3/8" square for use with 3/8 drive ratchet
  • Durable matt finish
  • Works on most sized filters  from 74 to 75mm.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:21045531
Part#: ATK-BM-0008-G8X-
Ships in 7 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time!
Show More Show Less
OEM - Corporate Logo
T#:37149889
Part#: 11428643749
Ships in 2 Business Days
$ 535.99 USD
Free Shipping on orders $49 and up

AUTOTECKNIC - Corporate Logo
T#:21209809
Part#: ATK-BM-0008-G42-
Ships in 7 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time! Dry carbon fiber is formed using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. On top of that they coat this product in a UV resistant coating extending the life of this cap significantly! Don't wait and get yours today! You will not be disappointed by the fit and finish!
Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7593106
Part#: 116182
Ships in 3 Business Days
$ 155.00 USD
Free Shipping on orders $49 and up
$ 155.00 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars.
Show More Show Less
Schwaben - Corporate Logo
T#:640457
Part#: FC-04
In Stock
Sale - Save 20% $ 9.99

This product was last offered at the strikethrough price on
05-02-2026

$ 7.99 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 9.99

This product was last offered at the strikethrough price on
05-02-2026

$ 7.99 USD
Free Shipping on orders $49 and up